Skip to content
worldfires
US · United States ·

Tank Farm Fire, August 2022 Converse

Out · last measured on 31 Aug 2022

The fire started on 31 August 2022 in Converse, United States, and satellites saw it burning for 1 day. United States agencies (MTBS / NIFC) mapped an official burnt perimeter of 741 hectares, spread across a single county.

It is the 84th largest in Wyoming since 2016 (of 117 with a page). Number 367 in United States in 2022, of 493.

We have the official perimeter (MTBS / NIFC) for this fire, but the VIIRS sensors did not capture it in enough detail: no day-by-day evolution, but the split by county is there.

Burnt area
741ha
official perimeter (MTBS / NIFC)
Duration
1day
31 Aug 2022 – 31 Aug 2022
Counties hit
1
counties
Started on
31 Aug
2022
Danger at start
39
Very high · FWI index

Where it burned

The weather it burned in

32°high
31km/h · peak gust
16%lowest humidity

It had gone 5 days without rain (1 mm or more) when it started. Rain came after the fire: 4.5 mm on 9 Sept.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 0.5% of the area of London (7.4 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each county

  1. Converse where it started
    734 ha
    0.1 %

Burnt area inside each county, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
31 Aug 32.3 °C 16 % 31 km/h 0.0 mm Very high 39
1 Sept after 34.1 °C 9 % 38 km/h 0.0 mm Extreme 58
2 Sept after 31.5 °C 19 % 35 km/h 0.0 mm Extreme 54
3 Sept after 32.6 °C 23 % 35 km/h 0.0 mm Extreme 55
4 Sept after 37.3 °C 9 % 40 km/h 0.0 mm Extreme 70
5 Sept after 34.8 °C 10 % 21 km/h 0.0 mm Very high 49
6 Sept after 34.7 °C 11 % 23 km/h 0.0 mm Very high 48
7 Sept after 35.4 °C 12 % 32 km/h 0.1 mm Very high 42
8 Sept after 30.8 °C 17 % 41 km/h 0.1 mm Very high 42
9 Sept after 13.6 °C 75 % 34 km/h 4.5 mm Very low 4

Its twins: fires that started in the same weather

It started with an FWI of 39.4, a minimum humidity of 16% and 5 days without rain. Fires in the area that started in weather like this since 2016: 28.

FWI at the start 39.4
Minimum humidity 16 %
Days without rain 5
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Vees Fire, July 2025
2,116 ha 3 days FWI 37.2 Min. humidity 16 % 164 km away, in 2025

First rain (1 mm or more) after it ended: 1.8 mm on 30 Jul.

What happened to them

3 days
median duration
1,042 ha
median area
54 %
went past 1,000 ha
1.6 mm
rain at the end (median; 23 of 28 had it)

It burned an area similar to its twins (741 ha against a median of 1,042 ha) and lasted 1 day, against 3 days.

In 5 of 28, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.6 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

4.5 mmfirst rain
9 Sept9 days after it ended
31km/h · max. gust

It was considered over on 31 Aug, and on 9 Sept 4.5 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 23 of 28, with a median of 1.6 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 24 Aug 2022
After · 7 Sept 2022

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 2 September 2022 the air beside the fire reached 13 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak13 µg/m³
Days over the guideline0 days
PM1018 µg/m³
Optical depth0.21
29 Aug31 Aug2 Sept
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Other fires nearby

All fires in United States

Frequently asked questions

How long did the Tank Farm Fire last?
It burned between 31 August 2022 and 31 August 2022: 1 day, according to the start date recorded by United States agencies (MTBS / NIFC) and the heat detections seen by satellite.
How much area did it burn?
The official perimeter published by United States agencies (MTBS / NIFC) is 741 hectares (7.4 km²). Other tallies, such as daily incident reports, may give slightly different figures.
Which counties burned?
The fire only entered Converse (734 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 32.3 °C, humidity dropped to 16 % and gusts hit 31 km/h. The fire danger index (FWI) reached 39, class Very high.
Where does this data come from?
From the official burnt perimeter of United States agencies (MTBS / NIFC, public domain), NASA FIRMS VIIRS hotspots and the administrative boundaries of United States. It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 28. Their median duration was 3 days and their median area 1,042 ha; 54 % went past 1,000 ha. In 5 of 28, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.6 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: MTBS (US Geological Survey and US Forest Service), official.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. No Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter is official and in the public domain. For past years it comes from MTBS (Monitoring Trends in Burn Severity), run by the U.S. Geological Survey and the USDA Forest Service, which map it on Landsat and Sentinel-2 imagery. For the current and last year it comes from WFIGS at the National Interagency Fire Center (NIFC): incident perimeters mapped by fire crews, aircraft and imagery. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. County boundaries come from geoBoundaries ADM2 (Public Domain). The area per county is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from official figures.