Skip to content
worldfires
BJ · Benin · –

Tanguiéta fire, 12 December 2023 Tanguiéta

Out · last detection 17 Dec 2023, 13:26 UTC

The fire started on 12 December 2023 in Tanguiéta, Benin, and satellites saw it burning for 6 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,710 hectares from heat detections, spread across a single municipality.

It is the 212th largest in Atakora since 2016 (of 420 with a page). Number 40 in Benin in 2023, of 100.

Burnt area
1,710ha
GWIS perimeter (Copernicus)
Duration
6days
12 Dec 2023 – 17 Dec 2023
Municipalities hit
1
communes
Started on
12 Dec
2023
Heat detections
48
in a single hotspot: 44 MW
Danger at start
58
Extreme · FWI index
Average daily power
84MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 12 Dec17 Dec
17 Dec 2023

How it evolved, day by day

12 Dec 2023 · 116 MW · 13 13 Dec 2023 · 323 MW · 20 14 Dec 2023 · 25 MW · 6 15 Dec 2023 · 3 MW · 3 16 Dec 2023 · 4 MW · 1 17 Dec 2023 · 34 MW · 5
13 Dec 16 Dec

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
41km/h · peak gust
13%lowest humidity

It had gone 55 days without rain (1 mm or more) when it started.

This area had burned before

96% of the perimeter overlaps earlier fires recorded since 2016: 744 ha in 2016, 476 ha in 2019, 1,119 ha in 2021, 514 ha in 2022. Part of it burned more than once, so the yearly figures add up to more than the 1,634 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 1.1% of the area of London (17 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Tanguiéta where it started
    1,721 ha reached on 12 Dec
    0.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
12 Dec 32.7 °C 15 % 41 km/h 0.0 mm Extreme 58
13 Dec 32.6 °C 14 % 38 km/h 0.0 mm Extreme 55
14 Dec 34.0 °C 16 % 33 km/h 0.0 mm Extreme 51
15 Dec 34.3 °C 18 % 32 km/h 0.0 mm Very high 49
16 Dec 35.6 °C 14 % 34 km/h 0.0 mm Extreme 51
17 Dec 35.6 °C 13 % 31 km/h 0.0 mm Very high 50
18 Dec after 35.4 °C 12 % 32 km/h 0.0 mm Extreme 51
19 Dec after 34.6 °C 14 % 31 km/h 0.0 mm Extreme 50
20 Dec after 34.1 °C 13 % 30 km/h 0.0 mm Very high 50
21 Dec after 34.0 °C 11 % 27 km/h 0.0 mm Very high 48
22 Dec after 36.3 °C 15 % 26 km/h 0.0 mm Very high 50
23 Dec after 36.2 °C 17 % 36 km/h 0.0 mm Extreme 55
24 Dec after 35.3 °C 16 % 34 km/h 0.0 mm Extreme 53
25 Dec after 34.3 °C 13 % 36 km/h 0.0 mm Extreme 56
26 Dec after 33.6 °C 12 % 33 km/h 0.0 mm Extreme 54
27 Dec after 33.9 °C 14 % 32 km/h 0.0 mm Extreme 52

Its twins: fires that started in the same weather

It started with an FWI of 58.5, a minimum humidity of 15% and 55 days without rain. Fires in the area that started in weather like this since 2016: 26.

FWI at the start 58.5
Minimum humidity 15 %
Days without rain 55
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Tanguiéta fire, December 2021
1,931 ha 9 days FWI 58.8 Min. humidity 14 % 12 km away, in 2021

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

3 days
median duration
1,362 ha
median area
100 %
went past 1,000 ha
—
rain at the end (median; 0 of 26 had it)

It burned an area similar to its twins (1,710 ha against a median of 1,362 ha) and lasted 6 days, against 3 days.

In none of them did 1 mm fall in the ten days after the end: they all went out without rain.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
41km/h · max. gust

It was considered over on 17 Dec, and not even 1 mm fell in the following ten days: it went out without rain. None of its 26 twins had rain when they ended.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 5 Dec 2023
After · 24 Dec 2023

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 12 December 2023 the air beside the fire reached 157 µg/m³ of PM2.5. That day averaged 115: 7.7 times the WHO daily guideline (15).

PM2.5 peak157 µg/m³
Days over the guideline11 days
PM10460 µg/m³
Optical depth1.16
10 Dec13 Dec16 Dec19 Dec
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 48Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Benin

Frequently asked questions

How long did the Tanguiéta fire last?
GWIS (Copernicus) dates it between 12 December 2023 and 17 December 2023: 6 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,710 hectares (17.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Tanguiéta (1,721 ha, 0.3 %).
What was the weather like?
During the fire the temperature reached 35.6 °C, humidity dropped to 13 % and gusts hit 41 km/h. The fire danger index (FWI) reached 58, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Benin (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 26. Their median duration was 3 days and their median area 1,362 ha; 100 % went past 1,000 ha. In none of them did 1 mm fall in the ten days after the end: they all went out without rain.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 48 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.