Skip to content
worldfires
SS · South Sudan · –

Tambura fire, 7 January 2026 Tambura

Out · last detection 24 Jan 2026, 11:31 UTC

The fire started on 7 January 2026 in Tambura, South Sudan, and satellites saw it burning for 17 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 199,582 hectares from heat detections, spread across a single municipality.

This page is probably a fire complex, not a single fire. GWIS merges into one perimeter the fires that touch over weeks, which in large burning seasons can join dozens of separate fires. The total area is reliable; the origin and dates refer to the whole complex.

Other fire pages in the same area and on the same dates:

The largest in South Sudan in 2026, of 277.

GWIS near-real-time perimeter, from the layer that changed in August 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
199,582ha
GWIS perimeter (Copernicus)
Duration
17days
7 Jan 2026 – 23 Jan 2026
Municipalities hit
1
counties
Started on
7 Jan
2026
Heat detections
5,880
in a single hotspot: 0 MW
Danger at start
64
Extreme · FWI index
Average daily power
2.6GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 7 Jan23 Jan
24 Jan 2026

How it evolved, day by day

7 Jan 2026 · 462 MW · 60 8 Jan 2026 · 679 MW · 109 9 Jan 2026 · 584 MW · 121 10 Jan 2026 · 332 MW · 30 11 Jan 2026 · 988 MW · 152 12 Jan 2026 · 2,806 MW · 271 13 Jan 2026 · 2,686 MW · 323 14 Jan 2026 · 3,671 MW · 667 15 Jan 2026 · 2,589 MW · 409 16 Jan 2026 · 57 MW · 35 17 Jan 2026 · 9,584 MW · 769 18 Jan 2026 · 8,132 MW · 820 19 Jan 2026 · 6,294 MW · 906 20 Jan 2026 · 6,442 MW · 1013 21 Jan 2026 · 345 MW · 116 22 Jan 2026 · 117 MW · 17 23 Jan 2026 · 350 MW · 55 24 Jan 2026 · 46 MW · 7
7 Jan 11 Jan 17 Jan 23 Jan

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

37°high
45km/h · peak gust
13%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

100% of the perimeter overlaps earlier fires recorded since 2016: 148,135 ha in 2016, 54,685 ha in 2017, 97,714 ha in 2018, 28,022 ha in 2019, 122,606 ha in 2020, 89,335 ha in 2021, 88,220 ha in 2022, 38,480 ha in 2023, 84,294 ha in 2024, 71,401 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 199,570 ha that had burned before.

How big is it?

20 km
It burned the equivalent of 1.3 times the area of London (1,996 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Tambura where it started
    164,923 ha
    13 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 63 % of the area in South Sudan 60 days without rain: 13 % of the area in South Sudan

Day High Min. humidity Peak gust Rain Danger (FWI)
7 Jan 35.0 °C 17 % 34 km/h 0.0 mm Extreme 64
8 Jan 35.8 °C 17 % 38 km/h 0.0 mm Extreme 69
9 Jan 35.3 °C 19 % 38 km/h 0.0 mm Extreme 66
10 Jan 34.0 °C 18 % 38 km/h 0.0 mm Very extreme 71
11 Jan 34.4 °C 18 % 35 km/h 0.0 mm Extreme 65
12 Jan 35.1 °C 18 % 33 km/h 0.0 mm Extreme 63
13 Jan 34.7 °C 18 % 42 km/h 0.0 mm Extreme 68
14 Jan 33.7 °C 20 % 45 km/h 0.0 mm Very extreme 74
15 Jan 33.7 °C 19 % 44 km/h 0.0 mm Very extreme 74
16 Jan 33.8 °C 17 % 35 km/h 0.0 mm Extreme 59
17 Jan 35.3 °C 13 % 30 km/h 0.0 mm Extreme 57
18 Jan 35.6 °C 15 % 36 km/h 0.0 mm Extreme 64
19 Jan 35.8 °C 15 % 40 km/h 0.0 mm Extreme 66
20 Jan 36.0 °C 16 % 36 km/h 0.0 mm Extreme 66
21 Jan 36.5 °C 19 % 36 km/h 0.0 mm Extreme 66
22 Jan 36.6 °C 19 % 31 km/h 0.0 mm Extreme 60
23 Jan 35.8 °C 20 % 24 km/h 0.0 mm Very high 43
24 Jan after 36.4 °C 21 % 36 km/h 0.0 mm Extreme 55
25 Jan after 37.6 °C 13 % 42 km/h 0.0 mm Very extreme 76
26 Jan after 37.5 °C 12 % 41 km/h 0.0 mm Very extreme 76
27 Jan after 37.1 °C 13 % 40 km/h 0.0 mm Very extreme 74
28 Jan after 34.9 °C 15 % 35 km/h 0.0 mm Extreme 66
29 Jan after 35.5 °C 14 % 38 km/h 0.0 mm Very extreme 71
30 Jan after 36.5 °C 14 % 32 km/h 0.0 mm Extreme 64
31 Jan after 36.8 °C 15 % 36 km/h 0.0 mm Extreme 57
1 Feb after 33.7 °C 21 % 35 km/h 0.0 mm Very high 49
2 Feb after 35.6 °C 16 % 28 km/h 0.0 mm Very high 42

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 31 Dec 2025
After · 30 Jan 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 22 January 2026 the air beside the fire reached 128 µg/m³ of PM2.5. That day averaged 73: 4.9 times the WHO daily guideline (15).

PM2.5 peak128 µg/m³
Days over the guideline22 days
PM10131 µg/m³
Optical depth0.97
5 Jan10 Jan15 Jan20 Jan25 Jan
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 0Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in South Sudan

Frequently asked questions

How long did the Tambura fire last?
GWIS (Copernicus) dates it between 7 January 2026 and 23 January 2026: 17 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 199,582 hectares (1,995.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Tambura (164,923 ha, 13 %).
What was the weather like?
During the fire the temperature reached 36.6 °C, humidity dropped to 13 % and gusts hit 45 km/h. The fire danger index (FWI) reached 74, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of South Sudan (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 4 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 30 January 2026 → 23 January 2026.
  2. Start date: 31 December 2025 → 7 January 2026.
  3. Last day with fire: 23 January 2026 → 30 January 2026.
  4. Start date: 7 January 2026 → 31 December 2025.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 3 polygons grouped in this page.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. No Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.