Skip to content
worldfires
SS · South Sudan · –

Tambura fire, 28 December 2017 Tambura

Out · last detection 12 Jan 2018, 11:37 UTC

The fire started on 28 December 2017 in Tambura, South Sudan, and satellites saw it burning for 16 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 6,143 hectares from heat detections, spread across a single municipality.

It is the 217th largest in Western Equatoria since 2016 (of 299 with a page). Number 131 in South Sudan in 2017, of 203.

Compare with…
Burnt area
6,143ha
GWIS perimeter (Copernicus)
Duration
16days
28 Dec 2017 – 12 Jan 2018
Municipalities hit
1
counties
Started on
28 Dec
2017
Heat detections
248
in a single hotspot: 42 MW
Danger at start
57
Extreme · FWI index
Average daily power
153MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 28 Dec12 Jan
12 Jan 2018

How it evolved, day by day

28 Dec 2017 · 437 MW · 31 29 Dec 2017 · 438 MW · 37 30 Dec 2017 · 769 MW · 39 31 Dec 2017 · 163 MW · 32 1 Jan 2018 · 79 MW · 22 2 Jan 2018 · 113 MW · 38 3 Jan 2018 · 50 MW · 30 4 Jan 2018 · 49 MW · 11 5 Jan 2018 · 8 MW · 3 6 Jan 2018 · 5 MW · 1 7 Jan 2018 · 28 MW · 1 9 Jan 2018 · 0 MW · 1 10 Jan 2018 · 4 MW · 1 12 Jan 2018 · 1 MW · 1
30 Dec 3 Jan 6 Jan 10 Jan

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

37°high
37km/h · peak gust
11%lowest humidity

It had gone 39 days without rain (1 mm or more) when it started.

This area had burned before

48% of the perimeter overlaps earlier fires recorded since 2016: 2,935 ha in 2016.

How big is it?

10 km
It burned the equivalent of 3.9% of the area of London (61 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Tambura where it started
    6,182 ha reached on 28 Dec
    0.5 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 63 % of the area in South Sudan

Day High Min. humidity Peak gust Rain Danger (FWI)
28 Dec 36.5 °C 16 % 32 km/h 0.0 mm Extreme 57
29 Dec 36.9 °C 15 % 23 km/h 0.0 mm Very high 43
30 Dec 36.2 °C 14 % 32 km/h 0.0 mm Extreme 55
31 Dec 35.7 °C 14 % 29 km/h 0.0 mm Extreme 52
1 Jan 32.6 °C 16 % 34 km/h 0.0 mm Extreme 56
2 Jan 31.9 °C 16 % 36 km/h 0.0 mm Extreme 60
3 Jan 32.6 °C 15 % 34 km/h 0.0 mm Extreme 59
4 Jan 33.0 °C 14 % 35 km/h 0.0 mm Extreme 61
5 Jan 32.3 °C 15 % 37 km/h 0.0 mm Extreme 62
6 Jan 33.0 °C 13 % 32 km/h 0.0 mm Extreme 60
7 Jan 33.6 °C 12 % 32 km/h 0.0 mm Extreme 62
8 Jan 33.9 °C 13 % 37 km/h 0.0 mm Extreme 66
9 Jan 33.7 °C 11 % 36 km/h 0.0 mm Extreme 66
10 Jan 34.5 °C 12 % 36 km/h 0.0 mm Extreme 66
11 Jan 35.6 °C 12 % 36 km/h 0.0 mm Extreme 67
12 Jan 36.3 °C 13 % 36 km/h 0.0 mm Extreme 68
13 Jan after 37.6 °C 12 % 37 km/h 0.0 mm Very extreme 71
14 Jan after 36.2 °C 13 % 23 km/h 0.0 mm Very high 48
15 Jan after 35.2 °C 15 % 29 km/h 0.0 mm Extreme 55
16 Jan after 34.7 °C 12 % 32 km/h 0.0 mm Extreme 61
17 Jan after 35.1 °C 13 % 37 km/h 0.0 mm Extreme 68
18 Jan after 35.8 °C 12 % 38 km/h 0.0 mm Very extreme 70
19 Jan after 35.7 °C 11 % 34 km/h 0.0 mm Extreme 65
20 Jan after 35.6 °C 11 % 35 km/h 0.0 mm Extreme 67
21 Jan after 36.1 °C 10 % 34 km/h 0.0 mm Extreme 67
22 Jan after 36.9 °C 9 % 36 km/h 0.0 mm Very extreme 72

Its twins: fires that started in the same weather

It started with an FWI of 56.6, a minimum humidity of 16% and 39 days without rain. Fires in the area that started in weather like this since 2016: 57.

FWI at the start 56.6
Minimum humidity 16 %
Days without rain 39
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Tambura fire, January 2020
5,071 ha 8 days FWI 55.6 Min. humidity 17 % 76 km away, in 2020

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

13 days
median duration
7,983 ha
median area
35 %
went past 10,000 ha
1.0 mm
rain at the end (median; 1 of 57 had it)

It burned an area similar to its twins (6,143 ha against a median of 7,983 ha) and lasted 16 days, against 13 days.

In 56 of 57, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.0 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
37km/h · max. gust

It was considered over on 12 Jan, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 1 of 57, with a median of 1.0 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 21 Dec 2017
After · 19 Jan 2018

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 248Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in South Sudan

Frequently asked questions

How long did the Tambura fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 28 December 2017 to 12 January 2018 (16 days). The perimeter dates it from 28 December 2017 to 5 January 2018.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 6,143 hectares (61.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Tambura (6,182 ha, 0.5 %).
What was the weather like?
During the fire the temperature reached 36.9 °C, humidity dropped to 11 % and gusts hit 37 km/h. The fire danger index (FWI) reached 68, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of South Sudan (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 57. Their median duration was 13 days and their median area 7,983 ha; 35 % went past 10,000 ha. In 56 of 57, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.0 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 5 January 2018 → 12 January 2018.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 28 December 2017 to 5 January 2018. 248 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.