Skip to content
worldfires
SL · Sierra Leone · –

Tambakha fire, 29 January 2025 Tambakha, Kasunko

Out · last detection 3 Feb 2025, 14:05 UTC

The fire started on 29 January 2025 in Tambakha, Sierra Leone, and satellites saw it burning for 6 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,015 hectares from heat detections, spread across 2 municipalities.

It is the 900th largest in Northern since 2016 (of 937 with a page). Number 100 in Sierra Leone in 2025, of 103.

Burnt area
1,015ha
GWIS perimeter (Copernicus)
Duration
6days
29 Jan 2025 – 3 Feb 2025
Municipalities hit
2
chiefdoms
Started on
29 Jan
2025
Heat detections
29
in a single hotspot: 86 MW
Danger at start
48
Very high · FWI index
Average daily power
103MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 29 Jan3 Feb
3 Feb 2025

How it evolved, day by day

29 Jan 2025 · 47 MW · 7 30 Jan 2025 · 426 MW · 8 31 Jan 2025 · 23 MW · 9 1 Feb 2025 · 17 MW · 4 3 Feb 2025 · 4 MW · 1
29 Jan 30 Jan 31 Jan 1 Feb 3 Feb

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

39°high
39km/h · peak gust
11%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

8% of the perimeter overlaps earlier fires recorded since 2016: 83 ha in 2016.

How big is it?

10 km
It burned the equivalent of 0.6% of the area of London (10 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Tambakha where it started
    939 ha reached on 29 Jan
    0.4 %
  2. 83 ha reached on 29 Jan
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Very dry air: 13 % of the area in Sierra Leone 60 days without rain: 15 % of the area in Sierra Leone

Day High Min. humidity Peak gust Rain Danger (FWI)
29 Jan 37.9 °C 12 % 26 km/h 0.0 mm Very high 48
30 Jan 38.7 °C 12 % 28 km/h 0.0 mm Very high 48
31 Jan 38.9 °C 12 % 30 km/h 0.0 mm Extreme 50
1 Feb 37.7 °C 13 % 29 km/h 0.0 mm Extreme 50
2 Feb 35.4 °C 11 % 38 km/h 0.0 mm Extreme 55
3 Feb 35.0 °C 14 % 39 km/h 0.0 mm Extreme 56
4 Feb after 37.7 °C 13 % 30 km/h 0.0 mm Extreme 51
5 Feb after 37.0 °C 15 % 35 km/h 0.0 mm Extreme 52
6 Feb after 37.8 °C 14 % 32 km/h 0.0 mm Extreme 52
7 Feb after 38.8 °C 11 % 28 km/h 0.0 mm Very high 50
8 Feb after 38.5 °C 15 % 25 km/h 0.0 mm Extreme 51
9 Feb after 38.7 °C 21 % 21 km/h 0.0 mm Very high 47
10 Feb after 38.4 °C 25 % 27 km/h 0.0 mm Very high 47
11 Feb after 38.8 °C 22 % 26 km/h 0.0 mm Very high 47
12 Feb after 37.4 °C 27 % 38 km/h 0.0 mm Very high 49
13 Feb after 35.9 °C 33 % 30 km/h 0.0 mm Very high 41

Its twins: fires that started in the same weather

It started with an FWI of 47.7, a minimum humidity of 12% and more than two months without rain. Fires in the area that started in weather like this since 2016: 49.

FWI at the start 47.7
Minimum humidity 12 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Kasunko fire, January 2018
2,092 ha 6 days FWI 48.2 Min. humidity 12 % 10 km away, in 2018

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

8 days
median duration
1,624 ha
median area
100 %
went past 1,000 ha
3.0 mm
rain at the end (median; 10 of 49 had it)

It stayed below its twins: 1,015 ha against a median of 1,624 ha. It lasted 6 days, against 8 days.

In 39 of 49, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.0 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
39km/h · max. gust

It was considered over on 3 Feb, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 10 of 49, with a median of 3.0 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 22 Jan 2025
After · 10 Feb 2025

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 1 February 2025 the air beside the fire reached 73 µg/m³ of PM2.5. That day averaged 52: 3.4 times the WHO daily guideline (15).

PM2.5 peak73 µg/m³
Days over the guideline9 days
PM10151 µg/m³
Optical depth0.68
27 Jan29 Jan31 Jan2 Feb4 Feb
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 29Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Sierra Leone

Frequently asked questions

How long did the Tambakha fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 29 January 2025 to 3 February 2025 (6 days). The perimeter dates it from 29 January 2025 to 1 February 2025.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,015 hectares (10.2 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Tambakha (939 ha, 0.4 %); Kasunko (83 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 38.9 °C, humidity dropped to 11 % and gusts hit 39 km/h. The fire danger index (FWI) reached 56, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Sierra Leone (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 49. Their median duration was 8 days and their median area 1,624 ha; 100 % went past 1,000 ha. In 39 of 49, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.0 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 1 February 2025 → 3 February 2025.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 29 January 2025 to 1 February 2025. 29 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.