Skip to content
worldfires
RU · Russia · –

Talitsky District fire, 8 May 2023 Talitsky District, Shatrovsky District, Shadrinsky District

Out · last detection 17 May 2023, 08:49 UTC

The fire started on 8 May 2023 in Talitsky District, Russia, and satellites saw it burning for 10 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 7,193 hectares from heat detections, spread across 3 municipalities.

It is the 10th largest in Sverdlovsk Oblast since 2016 (of 29 with a page). Number 146 in Russia in 2023, of 450.

Burnt area
7,193ha
GWIS perimeter (Copernicus)
Duration
10days
8 May 2023 – 17 May 2023
Municipalities hit
3
districts
Started on
8 May
2023
Heat detections
518
in a single hotspot: 117 MW
Danger at start
31
High · FWI index
Average daily power
655MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 8 May17 May
17 May 2023

How it evolved, day by day

8 May 2023 · 115 MW · 17 9 May 2023 · 413 MW · 60 10 May 2023 · 159 MW · 47 11 May 2023 · 2,499 MW · 182 12 May 2023 · 1,190 MW · 109 13 May 2023 · 8 MW · 5 14 May 2023 · 933 MW · 57 15 May 2023 · 563 MW · 39 17 May 2023 · 12 MW · 2
8 May 11 May 14 May 17 May

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

22°high
43km/h · peak gust
14%lowest humidity

It had gone 5 days without rain (1 mm or more) when it started. Rain came after the fire: 1.4 mm on 25 May.

This area had burned before

57% of the perimeter overlaps earlier fires recorded since 2016: 4,202 ha in 2021.

How big is it?

10 km
It burned the equivalent of 4.5% of the area of London (72 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Talitsky District where it started
    6,522 ha reached on 8 May
    1.5 %
  2. 367 ha reached on 8 May
    0.1 %
  3. 224 ha reached on 11 May
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
8 May 13.0 °C 21 % 43 km/h 0.0 mm High 31
9 May 11.6 °C 14 % 27 km/h 0.0 mm Moderate 20
10 May 14.8 °C 17 % 25 km/h 0.0 mm High 23
11 May 17.4 °C 21 % 41 km/h 0.0 mm High 25
12 May 14.6 °C 23 % 29 km/h 0.0 mm High 23
13 May 12.6 °C 33 % 35 km/h 0.3 mm High 25
14 May 18.1 °C 26 % 31 km/h 0.0 mm High 23
15 May 20.0 °C 25 % 30 km/h 0.0 mm Moderate 20
16 May 21.6 °C 24 % 37 km/h 0.0 mm High 29
17 May 17.8 °C 20 % 40 km/h 0.0 mm High 32
18 May after 17.7 °C 22 % 47 km/h 0.0 mm Very high 40
19 May after 19.7 °C 16 % 42 km/h 0.0 mm Very high 38
20 May after 23.2 °C 16 % 31 km/h 0.0 mm High 35
21 May after 24.1 °C 16 % 26 km/h 0.0 mm High 35
22 May after 26.5 °C 13 % 19 km/h 0.0 mm High 31
23 May after 27.0 °C 16 % 23 km/h 0.0 mm High 33
24 May after 29.0 °C 14 % 25 km/h 0.0 mm Very high 40
25 May after 27.4 °C 29 % 37 km/h 1.4 mm Very high 42

Its twins: fires that started in the same weather

It started with an FWI of 31.0, a minimum humidity of 21% and 5 days without rain. Fires in the area that started in weather like this since 2016: 25.

FWI at the start 31.0
Minimum humidity 21 %
Days without rain 5
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Dalmatovsky District fire, August 2021
3,685 ha 6 days FWI 30.5 Min. humidity 22 % 94 km away, in 2021

First rain (1 mm or more) after it ended: 2.7 mm on 27 Aug.

What happened to them

8 days
median duration
5,405 ha
median area
16 %
went past 10,000 ha
3.2 mm
rain at the end (median; 24 of 25 had it)

It burned an area similar to its twins (7,193 ha against a median of 5,405 ha) and lasted 10 days, against 8 days.

In 1 of 25, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.2 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.4 mmfirst rain
25 May8 days after it ended
43km/h · max. gust

It was considered over on 17 May, and on 25 May 1.4 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 24 of 25, with a median of 3.2 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 1 May 2023
After · 24 May 2023

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 10 May 2023 the air beside the fire reached 127 µg/m³ of PM2.5. That day averaged 60: 4.0 times the WHO daily guideline (15).

PM2.5 peak127 µg/m³
Days over the guideline9 days
PM10181 µg/m³
Optical depth1.12
6 May9 May12 May15 May18 May
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 518Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Russia

Frequently asked questions

How long did the Talitsky District fire last?
GWIS (Copernicus) dates it between 8 May 2023 and 17 May 2023: 10 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 7,193 hectares (71.9 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 3 municipalities: Talitsky District (6,522 ha, 1.5 %); Shatrovsky District (367 ha, 0.1 %); Shadrinsky District (224 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 21.6 °C, humidity dropped to 14 % and gusts hit 43 km/h. The fire danger index (FWI) reached 32, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 25. Their median duration was 8 days and their median area 5,405 ha; 16 % went past 10,000 ha. In 1 of 25, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.2 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 518 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.