Skip to content
worldfires
AU · Australia · –

Tablelands fire, October 2017 Tablelands, Charters Towers

Out · last detection 11 Nov 2017, 15:17 UTC

The fire started on 30 October 2017 in Tablelands, Australia, and satellites saw it burning for 13 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 6,555 hectares from heat detections, spread across 2 municipalities.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
6,555ha
GWIS perimeter (Copernicus)
Duration
13days
30 Oct 2017 – 11 Nov 2017
Municipalities hit
2
local government areas
Started on
30 Oct
2017
Heat detections
380
in a single hotspot: 39 MW
Danger at start
23
High · FWI index
Average daily power
254MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 30 Oct11 Nov
11 Nov 2017

How it evolved, day by day

31 Oct 2017 · 170 MW · 30 1 Nov 2017 · 88 MW · 20 2 Nov 2017 · 157 MW · 47 3 Nov 2017 · 77 MW · 19 4 Nov 2017 · 205 MW · 31 5 Nov 2017 · 298 MW · 55 6 Nov 2017 · 363 MW · 55 7 Nov 2017 · 1,158 MW · 89 8 Nov 2017 · 269 MW · 24 10 Nov 2017 · 1 MW · 1 11 Nov 2017 · 11 MW · 9
31 Oct 3 Nov 7 Nov

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

34°high
52km/h · peak gust
24%lowest humidity

It had gone 8 days without rain (1 mm or more) when it started. Rain came after the fire: 7.7 mm on 20 Nov.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 4.1% of the area of London (66 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Tablelands where it started
    6,456 ha
    0.6 %
  2. 158 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
30 Oct 33.8 °C 31 % 23 km/h 0.0 mm High 23
31 Oct 34.5 °C 25 % 29 km/h 0.0 mm High 28
1 Nov 32.6 °C 30 % 32 km/h 0.0 mm High 22
2 Nov 31.9 °C 36 % 35 km/h 0.9 mm Moderate 19
3 Nov 31.8 °C 38 % 34 km/h 0.3 mm Moderate 18
4 Nov 32.1 °C 30 % 36 km/h 0.0 mm High 29
5 Nov 31.6 °C 28 % 41 km/h 0.0 mm High 36
6 Nov 31.0 °C 32 % 39 km/h 0.0 mm High 35
7 Nov 33.3 °C 24 % 38 km/h 0.0 mm High 37
8 Nov 33.7 °C 31 % 38 km/h 0.4 mm High 31
9 Nov 28.8 °C 50 % 52 km/h 1.0 mm High 34
10 Nov 27.5 °C 43 % 50 km/h 0.0 mm High 26
11 Nov 28.2 °C 33 % 48 km/h 0.0 mm Very high 40
12 Nov after 26.0 °C 46 % 48 km/h 0.1 mm Very high 39
13 Nov after 27.3 °C 42 % 52 km/h 0.0 mm High 38
14 Nov after 26.2 °C 55 % 41 km/h 0.8 mm High 27
15 Nov after 29.8 °C 39 % 37 km/h 0.0 mm High 31
16 Nov after 32.2 °C 30 % 39 km/h 0.0 mm High 32
17 Nov after 31.4 °C 32 % 37 km/h 0.1 mm High 32
18 Nov after 32.7 °C 26 % 41 km/h 0.0 mm High 33
19 Nov after 35.2 °C 21 % 41 km/h 0.0 mm High 28
20 Nov after 31.9 °C 32 % 34 km/h 7.7 mm High 30

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 23 Oct 2017
After · 18 Nov 2017

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 380Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Tablelands fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 30 October 2017 to 11 November 2017 (13 days). The perimeter dates it from 31 October 2017 to 8 November 2017.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 6,555 hectares (65.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Tablelands (6,456 ha, 0.6 %); Charters Towers (158 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 34.5 °C, humidity dropped to 24 % and gusts hit 52 km/h. The fire danger index (FWI) reached 40, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 3 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Name: Charters Towers → Tablelands.
  2. Last day with fire: 8 November 2017 → 11 November 2017.
  3. Start date: 31 October 2017 → 30 October 2017.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 31 October 2017 to 8 November 2017. 380 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.