Skip to content
worldfires
RO · Romania · –

Sulina fire, 25 February 2022 Sulina

Out · last detection 27 Feb 2022, 01:06 UTC

The fire started on 25 February 2022 in Sulina, Romania, and satellites saw it burning for 3 days. Copernicus mapped a burnt perimeter of 198 hectares from satellite imagery, spread across a single municipality.

This record is fire in the reed beds of the Danube Delta, not a forest fire. Thousands of hectares of reed burn in the delta every year, mostly between January and April, and many of these burns are deliberate. That is why it is left out of the fire rankings.

The power measured by the satellite is low (7.3 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
198ha
Copernicus perimeter
Duration
3days
25 Feb 2022 – 27 Feb 2022
Municipalities hit
1
municipalities
Started on
25 Feb
2022
Heat detections
6
in a single hotspot: 7 MW
Danger at start
6
Low · FWI index
Average daily power
8MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 25 Feb27 Feb
27 Feb 2022

How it evolved, day by day

25 Feb 2022 · 15 MW · 2 26 Feb 2022 · 9 MW · 3 27 Feb 2022 · 1 MW · 1
25 Feb 26 Feb 27 Feb

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

11°high
45km/h · peak gust
41%lowest humidity

It had gone 4 days without rain (1 mm or more) when it started. Rain came after the fire: 10.5 mm on 28 Feb.

This area had burned before

100% of the perimeter overlaps earlier fires recorded since 2016: 118 ha in 2016, 46 ha in 2017, 191 ha in 2019, 79 ha in 2020. Part of it burned more than once, so the yearly figures add up to more than the 198 ha that had burned before.

What happened to each town

  1. Sulina 3,118 inhabitants · 4.4 km from the centre where it started
    198 ha reached on 25 Feb
    0.6 %

Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Other natural land100 %

Natura 2000 protected area affected: 100 %

Natura 2000 sites (European Environment Agency, 2024 release) crossed by the perimeter.

Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
25 Feb 11.0 °C 41 % 35 km/h 0.0 mm Low 6
26 Feb 10.1 °C 52 % 34 km/h 0.0 mm Low 6
27 Feb 8.3 °C 46 % 45 km/h 0.2 mm Low 10
28 Feb after 4.2 °C 69 % 60 km/h 10.5 mm Very low 1

Its twins: fires that started in the same weather

It started with an FWI of 5.7, a minimum humidity of 41% and 4 days without rain. Fires in the area that started in weather like this since 2017: 19.

FWI at the start 5.7
Minimum humidity 41 %
Days without rain 4
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Crișan fire, March 2019
346 ha 1 day FWI 7.6 Min. humidity 41 % 23 km away, in 2019

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

2 days
median duration
195 ha
median area
11 %
went past 1,000 ha
1.3 mm
rain at the end (median; 13 of 19 had it)

It burned an area similar to its twins (198 ha against a median of 195 ha) and lasted 3 days, against 2 days.

In 6 of 19, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.3 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

10.5 mmfirst rain
28 Febthe day after it ended
45km/h · max. gust

It was considered over on 27 Feb, and on 28 Feb 10.5 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 13 of 19, with a median of 1.3 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2017.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 18 Feb 2022
After · 6 Mar 2022

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 24 February 2022 the air beside the fire reached 13 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak13 µg/m³
Days over the guideline0 days
PM1014 µg/m³
23 Feb25 Feb27 Feb1 Mar
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 6Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Romania

Frequently asked questions

How long did the Sulina fire last?
Copernicus dates it between 25 February 2022 and 27 February 2022: 3 days between the first and last image with fire.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 198 hectares (2.0 km²). Official national figures may differ.
Which municipalities burned?
The fire only entered Sulina (198 ha, 0.6 %).
Did the fire reach a town?
The fire started in Sulina and came within 4.4 km of its centre. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
What was the weather like?
During the fire the temperature reached 11.0 °C, humidity dropped to 41 % and gusts hit 45 km/h. The fire danger index (FWI) reached 10, class Low.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Romania (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2017 with a similar FWI, humidity and dry spell: 19. Their median duration was 2 days and their median area 195 ha; 11 % went past 1,000 ha. In 6 of 19, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.3 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 6 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.