Skip to content
worldfires
US · United States · –

Steptoe Canyon Fire, July 2021 Whitman

Out · last detection 24 Jul 2021, 20:48 UTC

The fire started on 22 July 2021 in Whitman, United States, and satellites saw it burning for 3 days. United States agencies (MTBS / NIFC) mapped an official burnt perimeter of 1,115 hectares, spread across a single county.

It is the 190th largest in Washington since 2016 (of 285 with a page). Number 214 in United States in 2021, of 385.

The power measured by the satellite is low (27.5 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
1,115ha
official perimeter (MTBS / NIFC)
Duration
≈ 3days
22 Jul 2021 – 24 Jul 2021
Counties hit
1
counties
Started on
22 Jul
2021
Heat detections
61
in a single hotspot: 27 MW
Danger at start
32
High · FWI index
Average daily power
180MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 22 Jul24 Jul
24 Jul 2021

How it evolved, day by day

22 Jul 2021 · 309 MW · 50 24 Jul 2021 · 50 MW · 11
22 Jul 24 Jul

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

32°high
32km/h · peak gust
14%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 9.8 mm on 1 Aug.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 0.7% of the area of London (11 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each county

  1. Whitman where it started
    1,109 ha reached on 22 Jul
    0.2 %

Burnt area inside each county, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
22 Jul 26.0 °C 18 % 31 km/h 0.0 mm High 32
23 Jul 29.1 °C 14 % 32 km/h 0.0 mm Very high 45
24 Jul 32.1 °C 16 % 27 km/h 0.0 mm Very high 43
25 Jul after 34.3 °C 16 % 26 km/h 0.0 mm Very high 41
26 Jul after 31.8 °C 20 % 23 km/h 0.0 mm Very high 44
27 Jul after 28.4 °C 29 % 52 km/h 0.0 mm Extreme 55
28 Jul after 32.0 °C 25 % 30 km/h 0.0 mm High 37
29 Jul after 35.4 °C 17 % 23 km/h 0.0 mm Very high 44
30 Jul after 38.1 °C 15 % 28 km/h 0.0 mm Extreme 50
31 Jul after 38.4 °C 16 % 34 km/h 0.0 mm Very high 50
1 Aug after 27.2 °C 38 % 31 km/h 9.8 mm Very low 1

Its twins: fires that started in the same weather

It started with an FWI of 32.1, a minimum humidity of 18% and rain the day before. Fires in the area that started in weather like this since 2016: 29.

FWI at the start 32.1
Minimum humidity 18 %
Days without rain 0
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Highline Fire, July 2017
37,911 ha 48 days FWI 31.8 Min. humidity 17 % 201 km away, in 2017

First rain (1 mm or more) after it ended: 8.0 mm on 15 Sept.

What happened to them

13 days
median duration
2,094 ha
median area
66 %
went past 1,000 ha
4.7 mm
rain at the end (median; 21 of 29 had it)

It stayed below its twins: 1,115 ha against a median of 2,094 ha. It lasted 3 days, against 13 days.

In 8 of 29, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.7 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

9.8 mmfirst rain
1 Aug8 days after it ended
32km/h · max. gust

It was considered over on 24 Jul, and on 1 Aug 9.8 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 21 of 29, with a median of 4.7 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 15 Jul 2021
After · 31 Jul 2021

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 61Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in United States

Frequently asked questions

How long did the Steptoe Canyon Fire last?
The official perimeter only gives the start date (22 July 2021). The end comes from the heat detections inside the perimeter: it burned until 24 July 2021 (3 days from 22 July 2021), the last day with detections before more than 10 days in a row without any, so it is approximate.
How much area did it burn?
The official perimeter published by United States agencies (MTBS / NIFC) is 1,115 hectares (11.2 km²). Other tallies, such as daily incident reports, may give slightly different figures.
Which counties burned?
The fire only entered Whitman (1,109 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 32.1 °C, humidity dropped to 14 % and gusts hit 32 km/h. The fire danger index (FWI) reached 45, class Very high.
Where does this data come from?
From the official burnt perimeter of United States agencies (MTBS / NIFC, public domain), NASA FIRMS VIIRS hotspots and the administrative boundaries of United States. It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 29. Their median duration was 13 days and their median area 2,094 ha; 66 % went past 1,000 ha. In 8 of 29, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.7 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: MTBS (US Geological Survey and US Forest Service), official.
  • The official perimeter has no end date: the end is the last day with VIIRS detections inside the perimeter before a gap of more than 10 days (150 days at most), so it is approximate. 61 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter is official and in the public domain. For past years it comes from MTBS (Monitoring Trends in Burn Severity), run by the U.S. Geological Survey and the USDA Forest Service, which map it on Landsat and Sentinel-2 imagery. For the current and last year it comes from WFIGS at the National Interagency Fire Center (NIFC): incident perimeters mapped by fire crews, aircraft and imagery. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. County boundaries come from geoBoundaries ADM2 (Public Domain). The area per county is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from official figures.