Skip to content
worldfires
RU · Russia · –

Sretensky District fire, 11 May 2016 Sretensky District, Chernyshevsky District

Out · last detection 24 May 2016, 05:18 UTC

The fire started on 11 May 2016 in Sretensky District, Russia, and satellites saw it burning for 17 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 28,082 hectares from heat detections, spread across 2 municipalities.

It is the 24th largest in Zabaykalsky Krai since 2016 (of 465 with a page). Number 46 in Russia in 2016, of 692.

Burnt area
28,082ha
GWIS perimeter (Copernicus)
Duration
17days
11 May 2016 – 27 May 2016
Municipalities hit
2
districts
Started on
11 May
2016
Heat detections
1,562
in a single hotspot: 240 MW
Danger at start
26
High · FWI index
Average daily power
1.3GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 11 May27 May
24 May 2016

How it evolved, day by day

11 May 2016 · 50 MW · 9 12 May 2016 · 4 MW · 3 14 May 2016 · 17 MW · 12 15 May 2016 · 2,866 MW · 237 16 May 2016 · 5,259 MW · 464 17 May 2016 · 2,380 MW · 268 18 May 2016 · 2,473 MW · 270 19 May 2016 · 963 MW · 132 21 May 2016 · 32 MW · 3 22 May 2016 · 139 MW · 31 23 May 2016 · 816 MW · 95 24 May 2016 · 513 MW · 38
11 May 16 May 22 May

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

27°high
52km/h · peak gust
14%lowest humidity

It had gone 10 days without rain (1 mm or more) when it started. Rain came after the fire: 17.9 mm on 28 May.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 18% of the area of London (281 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Sretensky District where it started
    24,921 ha reached on 11 May
    1.6 %
  2. 3,033 ha reached on 18 May
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
11 May 11.0 °C 15 % 44 km/h 0.0 mm High 26
12 May 7.8 °C 23 % 34 km/h 0.0 mm Moderate 18
13 May 12.1 °C 17 % 36 km/h 0.0 mm High 23
14 May 10.9 °C 36 % 45 km/h 1.5 mm Moderate 14
15 May 18.0 °C 19 % 35 km/h 0.0 mm Moderate 16
16 May 24.7 °C 14 % 37 km/h 0.0 mm High 29
17 May 26.7 °C 14 % 32 km/h 0.0 mm High 22
18 May 23.0 °C 28 % 42 km/h 0.0 mm High 25
19 May 22.5 °C 29 % 35 km/h 0.4 mm High 22
20 May 13.0 °C 38 % 52 km/h 3.4 mm Very low 4
21 May 17.7 °C 19 % 50 km/h 0.0 mm Moderate 13
22 May 20.6 °C 24 % 35 km/h 0.0 mm Moderate 19
23 May 21.5 °C 19 % 25 km/h 0.0 mm High 23
24 May 17.3 °C 38 % 28 km/h 0.0 mm Moderate 19
25 May 11.1 °C 38 % 44 km/h 1.4 mm High 23
26 May 10.4 °C 27 % 41 km/h 0.0 mm Low 9
27 May 14.1 °C 27 % 27 km/h 0.0 mm Moderate 15
28 May after 5.7 °C 55 % 44 km/h 17.9 mm Very low 0

Its twins: fires that started in the same weather

It started with an FWI of 26.0, a minimum humidity of 15% and 10 days without rain. Fires in the area that started in weather like this since 2017: 20.

FWI at the start 26.0
Minimum humidity 15 %
Days without rain 10
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Chernyshevsky District fire, April 2018
5,599 ha 7 days FWI 25.9 Min. humidity 16 % 66 km away, in 2018

First rain (1 mm or more) after it ended: 1.8 mm on 5 May.

What happened to them

9 days
median duration
5,140 ha
median area
10 %
went past 10,000 ha
4.8 mm
rain at the end (median; 20 of 20 had it)

It was 5.5 times larger than the median of its twins and lasted 17 days, against 9 days.

Only 1 of its 20 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. All of them had rain in the ten days after the end: the first rainy day brought a median of 4.8 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

17.9 mmfirst rain
28 Maythe day after it ended
52km/h · max. gust

It was considered over on 27 May, and on 28 May 17.9 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 20 of 20, with a median of 4.8 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2017.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 4 May 2016
After · 3 Jun 2016

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 1,562Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Russia

Frequently asked questions

How long did the Sretensky District fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 11 May 2016 to 27 May 2016 (17 days). The perimeter dates it from 12 May 2016 to 24 May 2016.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 28,082 hectares (280.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Sretensky District (24,921 ha, 1.6 %); Chernyshevsky District (3,033 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 26.7 °C, humidity dropped to 14 % and gusts hit 52 km/h. The fire danger index (FWI) reached 29, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2017 with a similar FWI, humidity and dry spell: 20. Their median duration was 9 days and their median area 5,140 ha; 10 % went past 10,000 ha. Only 1 of its 20 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. All of them had rain in the ten days after the end: the first rainy day brought a median of 4.8 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 24 May 2016 → 27 May 2016.
  2. Start date: 12 May 2016 → 11 May 2016.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 12 May 2016 to 24 May 2016. 1,562 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.