Skip to content
worldfires
AU · Australia · –

Southern Grampians fire, January 2025 Southern Grampians, Northern Grampians, Horsham

Out · last detection 6 Feb 2025, 15:48 UTC

The fire started on 27 January 2025 in Southern Grampians, Australia, and satellites saw it burning for 13 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 66,968 hectares from heat detections, spread across 3 municipalities.

It is the 6th largest in Victoria since 2016 (of 31 with a page). The largest in Australia in 2025, of 49.

Compare with…

Suggestions: West Wimmera · 2021Ararat · 2024

Burnt area
66,968ha
GWIS perimeter (Copernicus)
Duration
13days
27 Jan 2025 – 8 Feb 2025
Municipalities hit
3
local government areas
Started on
27 Jan
2025
Heat detections
6,477
in a single hotspot: 1,169 MW
Danger at start
71
Very extreme · FWI index
Average daily power
12.9GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 27 Jan8 Feb
6 Feb 2025

How it evolved, day by day

27 Jan 2025 · 966 MW · 107 28 Jan 2025 · 12,451 MW · 520 29 Jan 2025 · 10,792 MW · 456 30 Jan 2025 · 19,173 MW · 1044 31 Jan 2025 · 33,185 MW · 1470 1 Feb 2025 · 25,257 MW · 943 2 Feb 2025 · 11,274 MW · 402 3 Feb 2025 · 2,212 MW · 150 4 Feb 2025 · 15,467 MW · 1033 5 Feb 2025 · 5,428 MW · 213 6 Feb 2025 · 5,193 MW · 139
27 Jan 31 Jan 5 Feb

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

35°high
78km/h · peak gust
17%lowest humidity

It had gone 14 days without rain (1 mm or more) when it started. Rain came after the fire: 1.3 mm on 14 Feb.

This area had burned before

5% of the perimeter overlaps earlier fires recorded since 2016: 386 ha in 2020, 469 ha in 2023, 2,677 ha in 2024.

How big is it?

10 km
It burned the equivalent of 42% of the area of London (670 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Southern Grampians where it started
    51,381 ha
    7.7 %
  2. 14,931 ha
    2.6 %
  3. 706 ha
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area3.4 ha
Residents≈ 20

Inside the perimeter there were about 3.4 hectares of built-up land and about 20 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia Strong wind: 39 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
27 Jan 33.4 °C 17 % 78 km/h 0.0 mm Very extreme 71
28 Jan 20.5 °C 33 % 45 km/h 0.0 mm High 36
29 Jan 20.0 °C 31 % 42 km/h 0.0 mm High 34
30 Jan 20.4 °C 34 % 42 km/h 0.0 mm High 33
31 Jan 23.5 °C 30 % 37 km/h 0.0 mm High 31
1 Feb 30.6 °C 22 % 35 km/h 0.0 mm High 31
2 Feb 34.8 °C 21 % 50 km/h 0.5 mm Extreme 54
3 Feb 32.1 °C 28 % 47 km/h 1.4 mm Extreme 51
4 Feb 28.9 °C 38 % 51 km/h 1.1 mm High 26
5 Feb 22.3 °C 31 % 45 km/h 0.0 mm High 22
6 Feb 28.7 °C 23 % 32 km/h 0.0 mm Very high 38
7 Feb 22.8 °C 45 % 50 km/h 0.0 mm High 34
8 Feb 19.5 °C 38 % 49 km/h 0.0 mm High 35
9 Feb after 16.2 °C 69 % 56 km/h 0.0 mm High 26
10 Feb after 25.6 °C 34 % 52 km/h 0.0 mm High 29
11 Feb after 29.3 °C 26 % 36 km/h 0.0 mm High 25
12 Feb after 32.1 °C 21 % 29 km/h 0.0 mm High 37
13 Feb after 25.0 °C 33 % 58 km/h 0.0 mm High 37
14 Feb after 18.6 °C 50 % 50 km/h 1.3 mm High 31

Its twins: fires that started in the same weather

It started with an FWI of 71.0, a minimum humidity of 17% and 14 days without rain. Fires in the area that started in weather like this since 2019: 1.

FWI at the start 71.0
Minimum humidity 17 %
Days without rain 14
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

West Wimmera fire, December 2021
9,915 ha 2 days FWI 73.5 Min. humidity 12 % 109 km away, in 2021

First rain (1 mm or more) after it ended: 3.7 mm on 5 Jan.

What happened to them

Fires in the area that started in similar weather: 1. With fewer than 15 we give no figures: they would be more noise than signal.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.3 mmfirst rain
14 Feb6 days after it ended
78km/h · max. gust

It was considered over on 8 Feb, and on 14 Feb 1.3 mm fell. We do not know whether the rain or the firefighters put it out.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2019.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 20 Jan 2025
After · 15 Feb 2025

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 1 February 2025 the air beside the fire reached 235 µg/m³ of PM2.5. That day averaged 127: 8.5 times the WHO daily guideline (15).

PM2.5 peak235 µg/m³
Days over the guideline7 days
PM10239 µg/m³
Optical depth1.18
25 Jan29 Jan2 Feb6 Feb10 Feb
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 6,477Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Southern Grampians fire last?
GWIS (Copernicus) dates it between 27 January 2025 and 8 February 2025: 13 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 66,968 hectares (669.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 3 municipalities: Southern Grampians (51,381 ha, 7.7 %); Northern Grampians (14,931 ha, 2.6 %); Horsham (706 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 34.8 °C, humidity dropped to 17 % and gusts hit 78 km/h. The fire danger index (FWI) reached 71, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 6,477 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.