Skip to content
worldfires
GH · Ghana · –

Sissala East fire, 8 December 2016 Sissala East, Kasena Nankana West

Out · last detection 17 Dec 2016, 13:52 UTC

The fire started on 8 December 2016 in Sissala East, Ghana, and satellites saw it burning for 10 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 5,051 hectares from heat detections, spread across 2 municipalities.

It is the 17th largest in Upper West Region since 2016 (of 93 with a page). Number 20 in Ghana in 2016, of 122.

Compare with…
Burnt area
5,051ha
GWIS perimeter (Copernicus)
Duration
10days
8 Dec 2016 – 17 Dec 2016
Municipalities hit
2
districts
Started on
8 Dec
2016
Heat detections
176
in a single hotspot: 173 MW
Danger at start
66
Extreme · FWI index
Average daily power
328MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 8 Dec17 Dec
17 Dec 2016

How it evolved, day by day

8 Dec 2016 · 164 MW · 16 9 Dec 2016 · 43 MW · 6 10 Dec 2016 · 1 MW · 1 11 Dec 2016 · 116 MW · 27 12 Dec 2016 · 43 MW · 14 14 Dec 2016 · 2 MW · 2 15 Dec 2016 · 2,518 MW · 103 16 Dec 2016 · 11 MW · 1 17 Dec 2016 · 53 MW · 6
8 Dec 10 Dec 12 Dec 15 Dec 17 Dec

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
39km/h · peak gust
9%lowest humidity

It had gone 53 days without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 3.2% of the area of London (51 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Sissala East where it started
    5,078 ha reached on 8 Dec
    1.0 %
  2. 11 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Very dry air: 18 % of the area in Ghana

Day High Min. humidity Peak gust Rain Danger (FWI)
8 Dec 36.3 °C 14 % 34 km/h 0.0 mm Extreme 66
9 Dec 35.5 °C 16 % 38 km/h 0.0 mm Very extreme 72
10 Dec 34.4 °C 18 % 39 km/h 0.0 mm Very extreme 76
11 Dec 35.1 °C 13 % 33 km/h 0.0 mm Very extreme 71
12 Dec 35.2 °C 16 % 25 km/h 0.0 mm Extreme 58
13 Dec 33.9 °C 17 % 27 km/h 0.0 mm Extreme 54
14 Dec 34.0 °C 9 % 38 km/h 0.0 mm Very extreme 82
15 Dec 34.9 °C 12 % 32 km/h 0.0 mm Extreme 70
16 Dec 35.0 °C 14 % 30 km/h 0.0 mm Extreme 68
17 Dec 34.8 °C 14 % 29 km/h 0.0 mm Extreme 64
18 Dec after 33.6 °C 20 % 30 km/h 0.0 mm Extreme 56
19 Dec after 35.8 °C 17 % 32 km/h 0.0 mm Extreme 63
20 Dec after 36.1 °C 10 % 35 km/h 0.0 mm Very extreme 73
21 Dec after 36.1 °C 12 % 31 km/h 0.0 mm Very extreme 70
22 Dec after 35.8 °C 14 % 34 km/h 0.0 mm Very extreme 73
23 Dec after 35.5 °C 11 % 36 km/h 0.0 mm Very extreme 74
24 Dec after 36.0 °C 11 % 37 km/h 0.0 mm Very extreme 77
25 Dec after 33.6 °C 15 % 36 km/h 0.0 mm Very extreme 75
26 Dec after 31.6 °C 14 % 41 km/h 0.0 mm Very extreme 78
27 Dec after 31.9 °C 17 % 37 km/h 0.0 mm Very extreme 71

Its twins: fires that started in the same weather

It started with an FWI of 66.4, a minimum humidity of 14% and 53 days without rain. Fires in the area that started in weather like this since 2016: 15.

FWI at the start 66.4
Minimum humidity 14 %
Days without rain 53
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Sissala East fire, December 2018
3,793 ha 16 days FWI 65.9 Min. humidity 13 % 53 km away, in 2018

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

10 days
median duration
1,831 ha
median area
100 %
went past 1,000 ha
—
rain at the end (median; 0 of 15 had it)

It was 2.8 times larger than the median of its twins and lasted 10 days, against 10 days.

None of its 15 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In none of them did 1 mm fall in the ten days after the end: they all went out without rain.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
39km/h · max. gust

It was considered over on 17 Dec, and not even 1 mm fell in the following ten days: it went out without rain. None of its 15 twins had rain when they ended.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 1 Dec 2016
After · 24 Dec 2016

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 176Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Ghana

Frequently asked questions

How long did the Sissala East fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 8 December 2016 to 17 December 2016 (10 days). The perimeter dates it from 11 December 2016 to 17 December 2016.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 5,051 hectares (50.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Sissala East (5,078 ha, 1.0 %); Kasena Nankana West (11 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 36.3 °C, humidity dropped to 9 % and gusts hit 39 km/h. The fire danger index (FWI) reached 82, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Ghana (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 15. Their median duration was 10 days and their median area 1,831 ha; 100 % went past 1,000 ha. None of its 15 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In none of them did 1 mm fall in the ten days after the end: they all went out without rain.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 11 December 2016 → 8 December 2016.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 11 December 2016 to 17 December 2016. 176 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.