Skip to content
worldfires
GH · Ghana · –

Sissala East fire, 3 December 2016 Sissala East

Out · last detection 14 Dec 2016, 13:08 UTC

The fire started on 3 December 2016 in Sissala East, Ghana, and satellites saw it burning for 13 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 2,340 hectares from heat detections, spread across a single municipality.

It is the 57th largest in Upper West Region since 2016 (of 93 with a page). Number 86 in Ghana in 2016, of 122.

Burnt area
2,340ha
GWIS perimeter (Copernicus)
Duration
13days
3 Dec 2016 – 15 Dec 2016
Municipalities hit
1
districts
Started on
3 Dec
2016
Heat detections
73
in a single hotspot: 62 MW
Danger at start
69
Extreme · FWI index
Average daily power
50MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 3 Dec15 Dec
14 Dec 2016

How it evolved, day by day

3 Dec 2016 · 103 MW · 2 9 Dec 2016 · 147 MW · 23 10 Dec 2016 · 20 MW · 19 11 Dec 2016 · 10 MW · 6 12 Dec 2016 · 53 MW · 17 13 Dec 2016 · 2 MW · 2 14 Dec 2016 · 17 MW · 4
9 Dec 12 Dec 14 Dec

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

37°high
39km/h · peak gust
9%lowest humidity

It had gone 48 days without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 1.5% of the area of London (23 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Sissala East where it started
    2,355 ha reached on 3 Dec
    0.5 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area0.11 ha
Residents< 20

Inside the perimeter there were about 0.11 hectares of built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
3 Dec 37.0 °C 19 % 38 km/h 0.0 mm Extreme 69
4 Dec 36.1 °C 17 % 30 km/h 0.0 mm Extreme 59
5 Dec 36.4 °C 18 % 29 km/h 0.0 mm Extreme 61
6 Dec 36.4 °C 16 % 36 km/h 0.0 mm Extreme 68
7 Dec 36.3 °C 14 % 32 km/h 0.0 mm Extreme 63
8 Dec 36.5 °C 13 % 34 km/h 0.0 mm Extreme 66
9 Dec 35.9 °C 15 % 37 km/h 0.0 mm Very extreme 72
10 Dec 34.7 °C 17 % 39 km/h 0.0 mm Very extreme 76
11 Dec 35.4 °C 12 % 32 km/h 0.0 mm Very extreme 71
12 Dec 35.5 °C 16 % 21 km/h 0.0 mm Extreme 55
13 Dec 34.2 °C 17 % 28 km/h 0.0 mm Extreme 53
14 Dec 34.4 °C 9 % 39 km/h 0.0 mm Very extreme 82
15 Dec 35.3 °C 11 % 31 km/h 0.0 mm Very extreme 70
16 Dec after 35.3 °C 13 % 28 km/h 0.0 mm Extreme 67
17 Dec after 35.0 °C 14 % 27 km/h 0.0 mm Extreme 62
18 Dec after 33.8 °C 20 % 28 km/h 0.0 mm Extreme 52
19 Dec after 36.2 °C 16 % 33 km/h 0.0 mm Extreme 64
20 Dec after 36.5 °C 10 % 36 km/h 0.0 mm Very extreme 77
21 Dec after 36.4 °C 11 % 34 km/h 0.0 mm Very extreme 73
22 Dec after 36.0 °C 13 % 35 km/h 0.0 mm Very extreme 76
23 Dec after 36.0 °C 11 % 36 km/h 0.0 mm Very extreme 75
24 Dec after 36.4 °C 10 % 38 km/h 0.0 mm Very extreme 78
25 Dec after 34.0 °C 15 % 37 km/h 0.0 mm Very extreme 78

Its twins: fires that started in the same weather

It started with an FWI of 69.1, a minimum humidity of 19% and 48 days without rain. Fires in the area that started in weather like this since 2016: 22.

FWI at the start 69.1
Minimum humidity 19 %
Days without rain 48
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Biéha fire, December 2024
1,168 ha 8 days FWI 68.5 Min. humidity 20 % 69 km away, in 2024

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

11 days
median duration
2,145 ha
median area
100 %
went past 1,000 ha
—
rain at the end (median; 0 of 22 had it)

It burned an area similar to its twins (2,340 ha against a median of 2,145 ha) and lasted 13 days, against 11 days.

In none of them did 1 mm fall in the ten days after the end: they all went out without rain.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
39km/h · max. gust

It was considered over on 15 Dec, and not even 1 mm fell in the following ten days: it went out without rain. None of its 22 twins had rain when they ended.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 26 Nov 2016
After · 22 Dec 2016

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 73Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Ghana

Frequently asked questions

How long did the Sissala East fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 3 December 2016 to 15 December 2016 (13 days). The perimeter dates it from 8 December 2016 to 13 December 2016.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 2,340 hectares (23.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Sissala East (2,355 ha, 0.5 %).
What was the weather like?
During the fire the temperature reached 37.0 °C, humidity dropped to 9 % and gusts hit 39 km/h. The fire danger index (FWI) reached 82, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Ghana (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 22. Their median duration was 11 days and their median area 2,145 ha; 100 % went past 1,000 ha. In none of them did 1 mm fall in the ten days after the end: they all went out without rain.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 13 December 2016 → 15 December 2016.
  2. Start date: 8 December 2016 → 3 December 2016.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 8 December 2016 to 13 December 2016. 73 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.