Sinbaungwe fire, January 2026 Thayet, Sinbaungwe, Minhla
The fire started on 29 January 2026 in Sinbaungwe, Myanmar, and satellites saw it burning for 25 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 16,664 hectares from heat detections, spread across 3 municipalities.
It is the 6th largest in Magway since 2016 (of 190 with a page). Number 25 in Myanmar in 2026, of 480.
Compare with…
Suggestions: Thayet · 2025Mindon · 2026Minhla · 2026
- Burnt area
- 16,664ha
- GWIS perimeter (Copernicus)
- Duration
- 25days
- 29 Jan 2026 – 22 Feb 2026
- Municipalities hit
- 3
- municipalities
- Started on
- 29 Jan
- 2026
- Heat detections
- 443
- in a single hotspot: 51 MW
- Danger at start
- 25
- High · FWI index
- Average daily power
- 68MW
- detected power per day, on average
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone more than two months without rain (1 mm or more) when it started.
This area had burned before
49% of the perimeter overlaps earlier fires recorded since 2016: 3,634 ha in 2016, 1,732 ha in 2022, 345 ha in 2023, 3,790 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 8,123 ha that had burned before.
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
11,344 ha reached on 4 Feb9.4 %
-
Sinbaungwe where it started3,680 ha reached on 29 Jan1.8 %
-
1,735 ha reached on 31 Jan0.7 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 29 Jan | 32.5 °C | 39 % | 17 km/h | 0.0 mm | High 25 |
| 30 Jan | 33.2 °C | 36 % | 16 km/h | 0.0 mm | High 25 |
| 31 Jan | 33.1 °C | 34 % | 20 km/h | 0.0 mm | High 25 |
| 1 Feb | 33.2 °C | 36 % | 20 km/h | 0.0 mm | High 26 |
| 2 Feb | 33.3 °C | 36 % | 20 km/h | 0.0 mm | High 26 |
| 3 Feb | 32.8 °C | 40 % | 24 km/h | 0.0 mm | High 27 |
| 4 Feb | 33.0 °C | 36 % | 18 km/h | 0.0 mm | High 26 |
| 5 Feb | 34.0 °C | 35 % | 15 km/h | 0.0 mm | High 26 |
| 6 Feb | 33.1 °C | 38 % | 24 km/h | 0.0 mm | High 29 |
| 7 Feb | 33.6 °C | 35 % | 19 km/h | 0.0 mm | High 27 |
| 8 Feb | 33.8 °C | 33 % | 23 km/h | 0.0 mm | High 28 |
| 9 Feb | 34.7 °C | 38 % | 26 km/h | 0.0 mm | High 30 |
| 10 Feb | 34.6 °C | 40 % | 28 km/h | 0.0 mm | High 30 |
| 11 Feb | 35.3 °C | 34 % | 16 km/h | 0.0 mm | High 28 |
| 12 Feb | 35.7 °C | 22 % | 14 km/h | 0.0 mm | High 33 |
| 13 Feb | 35.1 °C | 27 % | 16 km/h | 0.0 mm | High 33 |
| 14 Feb | 34.5 °C | 27 % | 20 km/h | 0.0 mm | High 35 |
| 15 Feb | 35.5 °C | 22 % | 14 km/h | 0.0 mm | High 34 |
| 16 Feb | 34.8 °C | 28 % | 18 km/h | 0.0 mm | High 35 |
| 17 Feb | 34.9 °C | 29 % | 29 km/h | 0.0 mm | Very high 39 |
| 18 Feb | 35.7 °C | 32 % | 26 km/h | 0.0 mm | High 36 |
| 19 Feb | 36.8 °C | 34 % | 15 km/h | 0.0 mm | High 33 |
| 20 Feb | 36.3 °C | 38 % | 16 km/h | 0.0 mm | High 31 |
| 21 Feb | 35.3 °C | 33 % | 32 km/h | 0.6 mm | High 32 |
| 22 Feb | 36.0 °C | 25 % | 24 km/h | 0.0 mm | High 37 |
| 23 Feb after | 34.9 °C | 32 % | 21 km/h | 0.0 mm | High 34 |
| 24 Feb after | 32.8 °C | 35 % | 23 km/h | 0.0 mm | High 34 |
| 25 Feb after | 28.9 °C | 56 % | 28 km/h | 0.2 mm | High 24 |
| 26 Feb after | 34.6 °C | 33 % | 15 km/h | 0.0 mm | High 27 |
| 27 Feb after | 35.3 °C | 20 % | 26 km/h | 0.0 mm | Very high 41 |
| 28 Feb after | 35.0 °C | 29 % | 17 km/h | 0.0 mm | High 37 |
| 1 Mar after | 34.4 °C | 28 % | 22 km/h | 0.0 mm | High 36 |
| 2 Mar after | 35.4 °C | 29 % | 16 km/h | 0.0 mm | High 36 |
| 3 Mar after | 36.6 °C | 34 % | 25 km/h | 0.0 mm | Very high 38 |
| 4 Mar after | 35.4 °C | 32 % | 21 km/h | 0.0 mm | High 38 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · CopernicusOn 16 February 2026 the air beside the fire reached 105 µg/m³ of PM2.5. That day averaged 70: 4.6 times the WHO daily guideline (15).
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table · 443Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
Frequently asked questions
- How long did the Sinbaungwe fire last?
- According to the heat detections seen by satellite inside the perimeter, it burned from 29 January 2026 to 22 February 2026 (25 days). The perimeter dates it from 5 February 2026 to 20 February 2026.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 16,664 hectares (166.6 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire entered 3 municipalities: Thayet (11,344 ha, 9.4 %); Sinbaungwe (3,680 ha, 1.8 %); Minhla (1,735 ha, 0.7 %).
- What was the weather like?
- During the fire the temperature reached 36.8 °C, humidity dropped to 22 % and gusts hit 32 km/h. The fire danger index (FWI) reached 39, class Very high.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Myanmar (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Satellite cross-check
History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
No changes since 24 October 2026.
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
- Dates adjusted with the VIIRS detections inside the perimeter, which said 5 February 2026 to 20 February 2026. 443 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.