Skip to content
worldfires
CG · Republic of the Congo · –

Sibiti fire, August 2021 Sibiti

Out · last detection 21 Aug 2021, 13:22 UTC

The fire started on 20 August 2021 in Sibiti, Republic of the Congo, and satellites saw it burning for 2 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,032 hectares from heat detections, spread across a single municipality.

It is the 23th largest in Lékoumou since 2016 (of 24 with a page). Number 45 in Republic of the Congo in 2021, of 50.

The power measured by the satellite is low (25.8 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
1,032ha
GWIS perimeter (Copernicus)
Duration
2days
20 Aug 2021 – 21 Aug 2021
Municipalities hit
1
districts
Started on
20 Aug
2021
Heat detections
16
in a single hotspot: 26 MW
Danger at start
13
Moderate · FWI index
Average daily power
142MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 20 Aug21 Aug

How it evolved, day by day

21 Aug 2021 · 142 MW · 16

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

30°high
25km/h · peak gust
46%lowest humidity

It had gone 3 days without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 0.7% of the area of London (10 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Sibiti where it started
    1,039 ha reached on 21 Aug
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
20 Aug 27.9 °C 56 % 23 km/h 0.0 mm Moderate 13
21 Aug 30.4 °C 46 % 25 km/h 0.0 mm Moderate 18
22 Aug after 27.3 °C 61 % 20 km/h 0.0 mm Moderate 15
23 Aug after 28.6 °C 58 % 24 km/h 0.0 mm Moderate 16
24 Aug after 27.2 °C 59 % 22 km/h 0.0 mm Moderate 15
25 Aug after 31.1 °C 46 % 26 km/h 0.0 mm Moderate 19
26 Aug after 28.2 °C 60 % 19 km/h 0.2 mm Moderate 17
27 Aug after 28.5 °C 59 % 25 km/h 0.3 mm Moderate 17
28 Aug after 28.6 °C 56 % 27 km/h 0.0 mm Moderate 18
29 Aug after 28.7 °C 54 % 21 km/h 0.1 mm Moderate 18
30 Aug after 28.5 °C 55 % 28 km/h 0.0 mm Moderate 18
31 Aug after 27.4 °C 65 % 22 km/h 0.1 mm Moderate 15

Its twins: fires that started in the same weather

It started with an FWI of 13.1, a minimum humidity of 56% and 3 days without rain. Fires in the area that started in weather like this since 2016: 17.

FWI at the start 13.1
Minimum humidity 56 %
Days without rain 3
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Sibiti fire, September 2019
1,051 ha 2 days FWI 12.5 Min. humidity 56 % 60 km away, in 2019

First rain (1 mm or more) after it ended: 2.1 mm on 16 Sept.

What happened to them

4 days
median duration
1,394 ha
median area
100 %
went past 1,000 ha
2.1 mm
rain at the end (median; 12 of 17 had it)

It burned an area similar to its twins (1,032 ha against a median of 1,394 ha) and lasted 2 days, against 4 days.

In 5 of 17, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.1 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
25km/h · max. gust

It was considered over on 21 Aug, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 12 of 17, with a median of 2.1 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 13 Aug 2021
After · 28 Aug 2021

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 16Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Republic of the Congo

Frequently asked questions

How long did the Sibiti fire last?
GWIS (Copernicus) dates it between 20 August 2021 and 21 August 2021: 2 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,032 hectares (10.3 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Sibiti (1,039 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 30.4 °C, humidity dropped to 46 % and gusts hit 25 km/h. The fire danger index (FWI) reached 18, class Moderate.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Republic of the Congo (geoBoundaries ADM2). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 17. Their median duration was 4 days and their median area 1,394 ha; 100 % went past 1,000 ha. In 5 of 17, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.1 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Name: Divénié → Sibiti.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 16 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Map Library 2007, nombres de Wikidata) (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.