Burned area
satellite only8,018ha
Perimeter published by GWIS (Copernicus).
- Source
- GWIS (Copernicus)
- Date
- 19 May 2023 – 24 May 2023
+− cross-check
No official record is matched to this page to compare it with.
RU · Russia · –
Shimanovsky District fire, 19 May 2023 Shimanovsky District
Out · last detection 24 May 2023, 04:53 UTC
The fire started on 19 May 2023 in Shimanovsky District, Russia, and satellites saw it burning for 6 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 8,018 hectares from heat detections, spread across a single municipality.
It is the 183th largest in Amur Oblast since 2016 (of 491 with a page). Number 131 in Russia in 2023, of 450.
Use this data
Fire page data · version 2026-10-24matches the official recordwith caveatssatellite onlymodel
When copying, the sentence is
Tick the figures you want: they make up the lede and the CSV.
Duration by satellite
satellite only6days
19 May 2023 to 24 May 2023: first and last day with fire on the page.
- Source
- GWIS (Copernicus) · NASA FIRMS · VIIRS
- Date
- last detection: 24 May 2023, 04:53 UTC
+− cross-check
Satellites pass a few times a day and cloud or smoke can hide the fire: a lack of detections is not an official extinction. Each country’s emergency service declares a fire contained or out.
Start
satellite only19 May 2023
First day with fire seen by the satellites or the perimeter.
- Source
- GWIS (Copernicus) · NASA FIRMS · VIIRS
- Date
- 19 May 2023
+− cross-check
No official record is matched to this page, so the alert time and the cause are not known here.
Hotspots
satellite only379
VIIRS detections at 375 m. Most intense hotspot: 123 MW.
- Source
- NASA FIRMS · VIIRS (Suomi NPP)
- Date
- 19 May 2023 – 24 May 2023
+− cross-check
There is no official record to compare with. Each hotspot is a pixel detected in one satellite pass, not a separate fire.
The worst day
satellite only3,760MW
Total radiative power on 22 May 2023; hotspots that day: 197.
- Source
- NASA FIRMS · VIIRS (FRP)
- Date
- 22 May 2023
+− cross-check
Fire radiative power (FRP) measures the energy the fire gives off when the satellite passes. Added up by day, it compares intensity, not area.
Danger at the start
model16.9FWI · moderate
Fire Weather Index (Canadian system) computed by WorldFires for the day the fire started. Consecutive days without rain before: 3.
- Source
- WorldFires calculation (Canadian FWI system)
- Date
- 19 May 2023, local noon
- Model
- ERA5 0,25° (ECMWF · Copernicus C3S) · Open-Meteo.com
+− cross-check
This is an index computed from weather model data, not a measurement of the fire nor an official warning. Danger warnings are issued by each country’s authority. Emergency number and official warnings
Weather during the fire
model25.7°C · 22% RH
High of 25.7 °C and minimum humidity of 22% on 23 May 2023; gusts of 50 km/h on 20 May 2023.
- Source
- weather model at the fire’s grid cell
- Date
- 19 May 2023 – 24 May 2023
- Model
- ERA5 0,25° (ECMWF · Copernicus C3S) · Open-Meteo.com
+− cross-check
These are model values for a cell of about 25 km, not from a weather station: they may differ from what was measured on the ground.
This page’s change log has been kept since 24 October 2026: every night what it publishes is compared and the difference is logged. Anything earlier is reconstructed from each source’s date and marked as reconstructed.
Show
-
· reconstructed GHSLPopulation and built-up area computed
-
· reconstructed weatherWeather and FWI computed from the ERA5 reanalysis
What was saved on 24 October 2026
Every night a snapshot of what the page shows is saved. If anything changes, it appears in the list as a log entry.
- Area
- 8,018 ha
- Dates
- 19 May 2023 – 24 May 2023
- Name
- Shimanovsky District
- Official record
- —
Versioned permanent link
https://worldfires.org/en/fire/shimanovsky-district-2023-05-5?v=2026-10-24A version keeps the area, dates, name and official record; the area as it was logged (changes under 2% are not logged). The map, hotspots and weather always show today’s data.
Citation
A lede of about 60 words figures only, no adjectives
CSV for this fire shimanovsky-district-2023-05-5.csv · daily, no individual hotspots
| fecha | focos_viirs | frp_mw | tmax_c | tmin_c | hr_min_pct | viento_max_kmh | racha_max_kmh | precip_mm | fwi | clase_fwi | dentro_del_incendio |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2023-05-19 | 19 | 37 | 20.8 | 1.6 | 16 | 13.7 | 28.1 | 0 | 16.9 | moderado | 1 |
| 2023-05-20 | 1 | 1 | 19.4 | 6.9 | 23 | 21.3 | 49.7 | 0.3 | 21.6 | alto | 1 |
| 2023-05-21 | 138 | 1,272 | 21.5 | 6.2 | 16 | 19.5 | 49.3 | 0 | 22.7 | alto | 1 |
| 2023-05-22 | 197 | 3,760 | 24.9 | 5.4 | 18 | 15.2 | 40 | 0 | 21.6 | alto | 1 |
| 2023-05-23 | 12 | 224 | 25.7 | 7.6 | 22 | 12.6 | 35.3 | 1 | 15.5 | moderado | 1 |
| 2023-05-24 | 12 | 92 | 22.7 | 9.8 | 33 | 14.5 | 24.1 | 0 | 16.9 | moderado | 1 |
| 2023-05-25 | 0 | 0 | 21.6 | 7.9 | 43 | 14.6 | 44.6 | 6.5 | 1.9 | muy_bajo | 0 |
It is generated in your browser from this page’s data: one file per fire, aggregated by day and without individual hotspots.
Live widget for your story
It updates itself while the fire is still active and links to this page. Free, with the attribution shown at the bottom.
Sources for this page: GWIS (Copernicus), NASA FIRMS (VIIRS), ERA5 (ECMWF/Copernicus C3S) · Open-Meteo.com (CC BY 4.0), GHSL (JRC). Open-Meteo.com · How we build fire pages: methodology
- Burnt area
- 8,018ha
- GWIS perimeter (Copernicus)
- Duration
- 6days
- 19 May 2023 – 24 May 2023
- Municipalities hit
- 1
- districts
- Started on
- 19 May
- 2023
- Heat detections
- 379
- in a single hotspot: 123 MW
- Danger at start
- 17
- Moderate · FWI index
- Average daily power
- 898MW
- detected power per day, on average
Where it burned
HOTSPOTS BY DAY
19 May24 May
24 May 2023
How it evolved, day by day
19 May
22 May
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
26°high
50km/h · peak gust
16%lowest humidity
It had gone 3 days without rain (1 mm or more) when it started. Rain came after the fire: 6.5 mm on 25 May.
This area had burned before
66% of the perimeter overlaps earlier fires recorded since 2016: 4,594 ha in 2016, 1,466 ha in 2018, 224 ha in 2022. Part of it burned more than once, so the yearly figures add up to more than the 5,284 ha that had burned before.
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Moscow boundary: geoBoundaries · OpenStreetMap, Wambacher · © OpenStreetMap contributors (ODbL 1.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
Shimanovsky District where it started7,971 ha reached on 19 May0.6 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
People and buildings inside the perimeter
GHSL 2025Built-up area0.30 ha
Residents< 20
Inside the perimeter there were about 0.30 hectares of built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.
Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 19 May | 20.8 °C | 16 % | 28 km/h | 0.0 mm | Moderate 17 |
| 20 May | 19.4 °C | 23 % | 50 km/h | 0.3 mm | High 22 |
| 21 May | 21.5 °C | 16 % | 49 km/h | 0.0 mm | High 23 |
| 22 May | 24.9 °C | 18 % | 40 km/h | 0.0 mm | High 22 |
| 23 May | 25.7 °C | 22 % | 35 km/h | 1.0 mm | Moderate 16 |
| 24 May | 22.7 °C | 33 % | 24 km/h | 0.0 mm | Moderate 17 |
| 25 May after | 21.6 °C | 43 % | 45 km/h | 6.5 mm | Very low 2 |
Its twins: fires that started in the same weather
It started with an FWI of 16.9, a minimum humidity of 16% and 3 days without rain. Fires in the area that started in weather like this since 2016: 23.
FWI at the start
16.9
Minimum humidity
16 %
Days without rain
3
this fire
chosen twins
rest of the area
Almost identicalSimilar
Outlines of the closest twins
This fire · Shimanovsky District fire, 19 May 2023
8,018 ha
6 days
FWI 16.9
Min. humidity 16 %
Magdagachinsky District fire, May 2024
16,875 ha
14 days
FWI 16.5
Min. humidity 15 %
79 km away, in 2024
First rain (1 mm or more) after it ended: 4.8 mm on 21 May.
Svobodnensky District fire, May 2016
14,457 ha
6 days
FWI 13.9
Min. humidity 16 %
88 km away, in 2016
First rain (1 mm or more) after it ended: 10.8 mm on 11 May.
Shimanovsky District fire, May 2016
14,439 ha
3 days
FWI 16.6
Min. humidity 14 %
85 km away, in 2016
First rain (1 mm or more) after it ended: 6.8 mm on 11 May.
Zeysky District fire, May 2016
5,280 ha
2 days
FWI 16.1
Min. humidity 16 %
204 km away, in 2016
First rain (1 mm or more) after it ended: 3.7 mm on 11 May.
Zeysky District fire, May 2024
3,088 ha
6 days
FWI 18.1
Min. humidity 17 %
161 km away, in 2024
First rain (1 mm or more) after it ended: 4.3 mm on 21 May.
What happened to them
- 5 days
- median duration
- 7,155 ha
- median area
- 43 %
- went past 10,000 ha
- 6.8 mm
- rain at the end (median; 21 of 23 had it)
It burned an area similar to its twins (8,018 ha against a median of 7,155 ha) and lasted 6 days, against 5 days.
In 2 of 23, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 6.8 mm.
This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it
How it ended
6.5 mmfirst rain
25 Maythe day after it ended
50km/h · max. gust
It was considered over on 24 May, and on 25 May 6.5 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 21 of 23, with a median of 6.8 mm.
Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
How a twin is chosen
- Same area: fires that have already ended, less than 250 km from this one, since 2016.
- Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
- Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
- Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
- They are sorted by similarity, and the outlines of the first five are drawn.
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
↔
Before · 12 May 2023
After · 31 May 2023
Sentinel-2 did not pass over on that day. Try another date, or use false colour, which is daily.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · CopernicusOn 23 May 2023 the air beside the fire reached 424 µg/m³ of PM2.5. That day averaged 170: 11 times the WHO daily guideline (15).
PM2.5 peak424 µg/m³
Days over the guideline7 days
PM10605 µg/m³
Optical depth3.16
WHO 15
17 May20 May23 May26 May
Good
Fair
Moderate
Poor
Very poor
Extremely poor
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table · 379Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV
Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
- 15,027 haShimanovsky District18 May 2016 · 6 days · 10 km away
- 9,145 haShimanovsky District9 May 2025 · 7 days · 10 km away
- 12,024 haShimanovsky District2 April 2018 · 5 days · 19 km away
- 9,833 haShimanovsky DistrictApril 2016 · 2 days · 26 km away
- 20,846 haSvobodnensky District10 May 2025 · 4 days · 32 km away
- 12,331 haShimanovsky District5 May 2023 · 3 days · 32 km away
Frequently asked questions
- How long did the Shimanovsky District fire last?
- GWIS (Copernicus) dates it between 19 May 2023 and 24 May 2023: 6 days between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 8,018 hectares (80.2 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire only entered Shimanovsky District (7,971 ha, 0.6 %).
- What was the weather like?
- During the fire the temperature reached 25.7 °C, humidity dropped to 16 % and gusts hit 50 km/h. The fire danger index (FWI) reached 23, class High.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.
- How did the fires that started in similar weather in this area end?
- Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 23. Their median duration was 5 days and their median area 7,155 ha; 43 % went past 10,000 ha. In 2 of 23, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 6.8 mm.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 112 · Emergency number and official warnings
Satellite cross-check
History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
No changes since 24 October 2026.
RSS Changes to this page With cross-checks and a citable version
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
- Dates from the perimeter: the VIIRS detections inside it did not change them. 379 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
- Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.