Shimanovsky District fire, 28 March 2018 Shimanovsky District, Magdagachinsky District
The fire started on 28 March 2018 in Shimanovsky District, Russia, and satellites saw it burning for 14 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 33,242 hectares from heat detections, spread across 2 municipalities.
It is the 41th largest in Amur Oblast since 2016 (of 535 with a page). Number 30 in Russia in 2018, of 540.
- Burnt area
- 33,242ha
- GWIS perimeter (Copernicus)
- Duration
- 14days
- 28 Mar 2018 – 10 Apr 2018
- Municipalities hit
- 2
- districts
- Started on
- 28 Mar
- 2018
- Heat detections
- 1,650
- in a single hotspot: 242 MW
- Danger at start
- 4
- Very low · FWI index
- Average daily power
- 1.6GW
- detected power per day, on average
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 8 days without rain (1 mm or more) when it started.
This area had burned before
7% of the perimeter overlaps earlier fires recorded since 2016: 2,089 ha in 2016, 91 ha in 2017.
- 792 ha Shimanovsky District fire, May 2016 14,439 ha in total; the hectares shown are those it shares with this fire
- 275 ha Magdagachinsky District fire, May 2016 21,828 ha in total; the hectares shown are those it shares with this fire
- 31 ha Magdagachinsky District fire, May 2016 4,665 ha in total; the hectares shown are those it shares with this fire
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Moscow boundary: geoBoundaries · OpenStreetMap, Wambacher · © OpenStreetMap contributors (ODbL 1.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
Shimanovsky District where it started27,218 ha reached on 28 Mar1.9 %
-
6,111 ha reached on 2 Apr0.4 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
People and buildings inside the perimeter
GHSL 2020Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.
Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 21 Mar | 8.6 °C | 29 % | 40 km/h | 0.0 mm | Very low 4 |
| 22 Mar | 6.0 °C | 34 % | 33 km/h | 0.5 mm | Very low 4 |
| 23 Mar | 4.6 °C | 34 % | 40 km/h | 0.3 mm | Very low 4 |
| 24 Mar | 6.3 °C | 27 % | 35 km/h | 0.0 mm | Very low 4 |
| 25 Mar | 9.2 °C | 31 % | 48 km/h | 1.5 mm | Very low 1 |
| 26 Mar | 12.8 °C | 32 % | 66 km/h | 0.9 mm | Very low 4 |
| 27 Mar | 7.8 °C | 27 % | 43 km/h | 0.7 mm | Very low 4 |
| 28 Mar | 1.8 °C | 22 % | 56 km/h | 0.0 mm | Low 6 |
| 29 Mar | 4.7 °C | 17 % | 41 km/h | 0.0 mm | Low 6 |
| 30 Mar | 4.2 °C | 17 % | 52 km/h | 0.0 mm | Low 8 |
| 31 Mar | 5.0 °C | 12 % | 41 km/h | 0.0 mm | Low 8 |
| 1 Apr | 11.8 °C | 34 % | 54 km/h | 0.7 mm | Low 7 |
| 2 Apr | 7.5 °C | 24 % | 78 km/h | 0.2 mm | Moderate 12 |
| 3 Apr | -1.3 °C | 14 % | 76 km/h | 0.0 mm | Moderate 12 |
| 4 Apr | -2.1 °C | 13 % | 60 km/h | 0.0 mm | Low 10 |
| 5 Apr | 1.1 °C | 15 % | 50 km/h | 0.0 mm | Low 9 |
| 6 Apr | 2.5 °C | 24 % | 40 km/h | 0.0 mm | Low 8 |
| 7 Apr | 1.7 °C | 35 % | 46 km/h | 0.1 mm | Low 8 |
| 8 Apr | 4.4 °C | 24 % | 38 km/h | 0.0 mm | Low 7 |
| 9 Apr | 9.1 °C | 18 % | 34 km/h | 0.0 mm | Low 8 |
| 10 Apr | 12.1 °C | 15 % | 23 km/h | 0.0 mm | Low 10 |
| 11 Apr after | 9.8 °C | 29 % | 44 km/h | 0.0 mm | Low 11 |
| 12 Apr after | 7.1 °C | 20 % | 33 km/h | 0.0 mm | Low 10 |
| 13 Apr after | 6.9 °C | 22 % | 38 km/h | 0.0 mm | Low 10 |
| 14 Apr after | 9.2 °C | 12 % | 35 km/h | 0.0 mm | Moderate 11 |
| 15 Apr after | 10.4 °C | 17 % | 27 km/h | 0.0 mm | Low 10 |
| 16 Apr after | 15.5 °C | 11 % | 32 km/h | 0.0 mm | Moderate 15 |
| 17 Apr after | 12.3 °C | 25 % | 37 km/h | 0.0 mm | Moderate 14 |
| 18 Apr after | 11.3 °C | 21 % | 24 km/h | 0.0 mm | Moderate 13 |
| 19 Apr after | 16.3 °C | 19 % | 62 km/h | 0.1 mm | Moderate 21 |
| 20 Apr after | 9.3 °C | 24 % | 25 km/h | 0.2 mm | Moderate 14 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
Detections table · 1,650Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
- 32,117 haShimanovsky District15 May 2026 · 7 days · 8 km away
- 10,084 haShimanovsky District2 April 2018 · 5 days · 27 km away
- 14,439 haShimanovsky District8 May 2016 · 3 days · 28 km away
- 9,765 haShimanovsky District3 May 2023 · 5 days · 29 km away
- 7,462 haShimanovsky District20 May 2016 · 4 days · 37 km away
Frequently asked questions
- How long did the Shimanovsky District fire last?
- GWIS (Copernicus) dates it between 28 March 2018 and 10 April 2018: 14 days between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 33,242 hectares (332.4 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire entered 2 municipalities: Shimanovsky District (27,218 ha, 1.9 %); Magdagachinsky District (6,111 ha, 0.4 %).
- What was the weather like?
- During the fire the temperature reached 12.8 °C, humidity dropped to 12 % and gusts hit 78 km/h. The fire danger index (FWI) reached 12, class Moderate.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 112 · Emergency number and official warnings ›
Satellite cross-check
History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
No changes since 24 October 2026.
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
- Dates from the perimeter: the VIIRS detections inside it did not change them. 1,650 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
- Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.