Skip to content
worldfires
RU · Russia · –

Seryshevsky District fire, 20 April 2018 Seryshevsky District, Mazanovsky District

Out · last detection 29 Apr 2018, 17:09 UTC

The fire started on 20 April 2018 in Seryshevsky District, Russia, and satellites saw it burning for 9 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 15,984 hectares from heat detections, spread across 2 municipalities.

It is the 85th largest in Amur Oblast since 2016 (of 491 with a page). Number 72 in Russia in 2018, of 540.

Burnt area
15,984ha
GWIS perimeter (Copernicus)
Duration
9days
20 Apr 2018 – 28 Apr 2018
Municipalities hit
2
districts
Started on
20 Apr
2018
Heat detections
639
in a single hotspot: 277 MW
Danger at start
12
Moderate · FWI index
Average daily power
1.1GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 20 Apr28 Apr
29 Apr 2018

How it evolved, day by day

20 Apr 2018 · 0 MW · 1 21 Apr 2018 · 58 MW · 14 22 Apr 2018 · 81 MW · 6 23 Apr 2018 · 2,957 MW · 174 24 Apr 2018 · 6,515 MW · 327 25 Apr 2018 · 490 MW · 44 26 Apr 2018 · 123 MW · 27 27 Apr 2018 · 382 MW · 38 28 Apr 2018 · 117 MW · 6 29 Apr 2018 · 3 MW · 2
20 Apr 22 Apr 24 Apr 26 Apr 28 Apr

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

26°high
73km/h · peak gust
9%lowest humidity

It had gone 17 days without rain (1 mm or more) when it started. Rain came after the fire: 3.7 mm on 6 May.

This area had burned before

41% of the perimeter overlaps earlier fires recorded since 2016: 6,578 ha in 2016.

How big is it?

10 km
It burned the equivalent of 10% of the area of London (160 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Seryshevsky District where it started
    14,165 ha reached on 20 Apr
    3.8 %
  2. 1,750 ha reached on 24 Apr
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area0.15 ha
Residents< 20

Inside the perimeter there were about 0.15 hectares of built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
20 Apr 8.2 °C 34 % 27 km/h 0.6 mm Moderate 12
21 Apr 10.9 °C 16 % 52 km/h 0.0 mm Moderate 18
22 Apr 11.9 °C 12 % 33 km/h 0.0 mm Moderate 16
23 Apr 20.9 °C 9 % 37 km/h 0.0 mm High 23
24 Apr 24.0 °C 13 % 28 km/h 0.0 mm High 23
25 Apr 26.5 °C 13 % 52 km/h 0.5 mm High 32
26 Apr 7.3 °C 16 % 73 km/h 1.5 mm Moderate 14
27 Apr 11.3 °C 11 % 24 km/h 0.0 mm Moderate 14
28 Apr 18.1 °C 17 % 43 km/h 0.0 mm High 23
29 Apr after 14.5 °C 16 % 45 km/h 0.0 mm High 24
30 Apr after 11.8 °C 13 % 42 km/h 0.0 mm High 24
1 May after 13.4 °C 16 % 36 km/h 0.0 mm High 22
2 May after 14.1 °C 19 % 23 km/h 0.1 mm Moderate 19
3 May after 17.1 °C 9 % 31 km/h 0.0 mm High 26
4 May after 17.9 °C 17 % 22 km/h 0.0 mm High 26
5 May after 17.4 °C 25 % 28 km/h 0.0 mm High 23
6 May after 14.2 °C 35 % 44 km/h 3.7 mm Very low 4

Its twins: fires that started in the same weather

It started with an FWI of 11.8, a minimum humidity of 34% and 17 days without rain. Fires in the area that started in weather like this since 2016: 35.

FWI at the start 11.8
Minimum humidity 34 %
Days without rain 17
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Romnensky District fire, May 2023
32,190 ha 2 days FWI 15.4 Min. humidity 34 % 71 km away, in 2023

First rain (1 mm or more) after it ended: 3.4 mm on 8 May.

What happened to them

5 days
median duration
6,306 ha
median area
37 %
went past 10,000 ha
5.9 mm
rain at the end (median; 27 of 35 had it)

It was 2.5 times larger than the median of its twins and lasted 9 days, against 5 days.

Only 6 of its 35 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 8 of 35, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 5.9 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

3.7 mmfirst rain
6 May8 days after it ended
73km/h · max. gust

It was considered over on 28 Apr, and on 6 May 3.7 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 27 of 35, with a median of 5.9 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 13 Apr 2018
After · 5 May 2018

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 639Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Russia

Frequently asked questions

How long did the Seryshevsky District fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 20 April 2018 to 28 April 2018 (9 days). The perimeter dates it from 21 April 2018 to 27 April 2018.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 15,984 hectares (159.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Seryshevsky District (14,165 ha, 3.8 %); Mazanovsky District (1,750 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 26.5 °C, humidity dropped to 9 % and gusts hit 73 km/h. The fire danger index (FWI) reached 32, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 35. Their median duration was 5 days and their median area 6,306 ha; 37 % went past 10,000 ha. Only 6 of its 35 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 8 of 35, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 5.9 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 27 April 2018 → 28 April 2018.
  2. Start date: 21 April 2018 → 20 April 2018.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 21 April 2018 to 27 April 2018. 639 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.