Skip to content
worldfires
ID · Indonesia · →

Seruyan fire, 26 August 2026 Seruyan

Out · last detection 27 Sept 2026, 06:16 UTC

The fire started on 26 August 2026 in Seruyan, Indonesia, and satellites saw it burning for 32 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 5,579 hectares from heat detections, spread across a single municipality.

It is the 75th largest in Central Kalimantan since 2016 (of 316 with a page). Number 216 in Indonesia in 2026, of 1024.

Compare with…
Burnt area
5,579ha
GWIS perimeter (Copernicus)
Duration
32days
26 Aug 2026 – 26 Sept 2026
Municipalities hit
1
regencies
Started on
26 Aug
2026
Heat detections
517
in a single hotspot: 89 MW
Danger at start
26
High · FWI index
Average daily power
141MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 26 Aug26 Sept
27 Sept 2026

How it evolved, day by day

26 Aug 2026 · 123 MW · 16 27 Aug 2026 · 23 MW · 2 29 Aug 2026 · 11 MW · 2 30 Aug 2026 · 13 MW · 4 31 Aug 2026 · 12 MW · 2 1 Sept 2026 · 253 MW · 15 2 Sept 2026 · 51 MW · 9 3 Sept 2026 · 98 MW · 11 4 Sept 2026 · 68 MW · 11 5 Sept 2026 · 4 MW · 1 6 Sept 2026 · 94 MW · 17 7 Sept 2026 · 12 MW · 6 8 Sept 2026 · 57 MW · 16 9 Sept 2026 · 37 MW · 16 10 Sept 2026 · 96 MW · 18 11 Sept 2026 · 70 MW · 18 12 Sept 2026 · 25 MW · 3 13 Sept 2026 · 8 MW · 3 14 Sept 2026 · 49 MW · 8 15 Sept 2026 · 56 MW · 7 16 Sept 2026 · 8 MW · 3 17 Sept 2026 · 377 MW · 24 18 Sept 2026 · 235 MW · 17 19 Sept 2026 · 357 MW · 31 20 Sept 2026 · 546 MW · 68 21 Sept 2026 · 400 MW · 64 22 Sept 2026 · 683 MW · 50 23 Sept 2026 · 150 MW · 28 24 Sept 2026 · 207 MW · 23 26 Sept 2026 · 129 MW · 10 27 Sept 2026 · 112 MW · 14
26 Aug 1 Sept 6 Sept 11 Sept 16 Sept 21 Sept 22 Sept 27 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

34°high
54km/h · peak gust
44%lowest humidity

It had gone 11 days without rain (1 mm or more) when it started.

This area had burned before

91% of the perimeter overlaps earlier fires recorded since 2016: 630 ha in 2018, 6,660 ha in 2019, 6,307 ha in 2023. Part of it burned more than once, so the yearly figures add up to more than the 5,049 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 3.5% of the area of London (56 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Seruyan where it started
    5,564 ha reached on 26 Aug
    0.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
26 Aug 32.0 °C 47 % 47 km/h 0.0 mm High 26
27 Aug 31.9 °C 49 % 46 km/h 0.0 mm High 26
28 Aug 31.3 °C 51 % 46 km/h 0.0 mm High 26
29 Aug 31.5 °C 54 % 44 km/h 0.0 mm High 25
30 Aug 32.0 °C 50 % 40 km/h 0.0 mm High 25
31 Aug 31.5 °C 57 % 42 km/h 0.0 mm High 25
1 Sept 32.1 °C 49 % 54 km/h 0.0 mm High 29
2 Sept 31.5 °C 51 % 48 km/h 0.0 mm High 28
3 Sept 31.4 °C 55 % 48 km/h 0.0 mm High 27
4 Sept 31.6 °C 55 % 48 km/h 0.0 mm High 28
5 Sept 31.1 °C 58 % 48 km/h 0.0 mm High 27
6 Sept 30.9 °C 55 % 47 km/h 0.0 mm High 26
7 Sept 30.8 °C 62 % 46 km/h 0.7 mm Moderate 20
8 Sept 31.7 °C 60 % 43 km/h 0.4 mm Moderate 21
9 Sept 32.3 °C 54 % 45 km/h 0.2 mm High 24
10 Sept 32.7 °C 53 % 46 km/h 0.0 mm High 26
11 Sept 32.1 °C 53 % 50 km/h 0.0 mm High 27
12 Sept 32.1 °C 53 % 48 km/h 0.0 mm High 26
13 Sept 31.6 °C 63 % 50 km/h 0.1 mm High 26
14 Sept 31.1 °C 57 % 53 km/h 0.0 mm High 27
15 Sept 31.6 °C 57 % 49 km/h 0.0 mm High 25
16 Sept 31.9 °C 51 % 50 km/h 0.0 mm High 26
17 Sept 31.3 °C 59 % 38 km/h 0.8 mm Moderate 19
18 Sept 33.2 °C 44 % 42 km/h 0.0 mm High 28
19 Sept 33.6 °C 49 % 47 km/h 0.0 mm High 30
20 Sept 33.2 °C 45 % 49 km/h 0.0 mm High 31
21 Sept 31.8 °C 56 % 45 km/h 0.0 mm High 27
22 Sept 32.8 °C 51 % 46 km/h 0.0 mm High 28
23 Sept 33.2 °C 49 % 45 km/h 0.0 mm High 29
24 Sept 32.6 °C 53 % 42 km/h 0.0 mm High 28
25 Sept 32.1 °C 58 % 39 km/h 0.2 mm High 26
26 Sept 31.7 °C 66 % 37 km/h 1.5 mm Moderate 12
27 Sept after 32.4 °C 56 % 36 km/h 0.0 mm Moderate 20
28 Sept after 32.9 °C 53 % 35 km/h 0.1 mm High 23
29 Sept after 33.0 °C 53 % 36 km/h 0.2 mm High 24
30 Sept after 31.1 °C 69 % 38 km/h 0.9 mm Moderate 15
1 Oct after 33.2 °C 45 % 44 km/h 0.2 mm High 28
2 Oct after 33.7 °C 45 % 43 km/h 0.0 mm High 30
3 Oct after 32.9 °C 51 % 45 km/h 0.0 mm High 30
4 Oct after 33.1 °C 49 % 44 km/h 0.0 mm High 30
5 Oct after 33.6 °C 46 % 43 km/h 0.0 mm High 31
6 Oct after 33.1 °C 44 % 48 km/h 0.0 mm High 32

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 19 Aug 2026
After · 3 Oct 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 16 September 2026 the air beside the fire reached 73 µg/m³ of PM2.5. That day averaged 24: 1.6 times the WHO daily guideline (15).

PM2.5 peak73 µg/m³
Days over the guideline26 days
PM1080 µg/m³
Optical depth3.20
24252627282930311234567891011121314151617181920212223242526272829
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 517Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Indonesia ›

Frequently asked questions

How long did the Seruyan fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 26 August 2026 to 26 September 2026 (32 days). The perimeter dates it from 26 August 2026 to 19 September 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 5,579 hectares (55.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Seruyan (5,564 ha, 0.3 %).
What was the weather like?
During the fire the temperature reached 33.6 °C, humidity dropped to 44 % and gusts hit 54 km/h. The fire danger index (FWI) reached 31, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Indonesia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings ›

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 30 October 2026.
  1. Page published (5,579 ha).

RSS Changes to this page

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 26 August 2026 to 19 September 2026. 517 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.

How we build fire pages: methodology ›

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.