Skip to content
worldfires
TZ · Tanzania · –

Serengeti fire, 21 June 2026 Serengeti, Bariadi

Out · last detection

The fire started on in Serengeti, Tanzania, and satellites saw it burning for 14 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 8,170 hectares from heat detections, spread across 2 municipalities.

Number 40 in Tanzania in 2026, of 231.

GWIS near-real-time perimeter, from the layer that changed in August 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
8,170ha
GWIS perimeter (Copernicus)
Duration
14days
21 Jun 2026 – 4 Jul 2026
Municipalities hit
2
districts
Started on
21 Jun
2026
Heat detections
209
in a single hotspot: 84 MW
Danger at start
28
High · FWI index
Average daily power
111MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 21 Jun4 Jul
4 Jul 2026

How it evolved, day by day

21 Jun 2026 · 13 MW · 3 22 Jun 2026 · 102 MW · 16 25 Jun 2026 · 16 MW · 3 26 Jun 2026 · 113 MW · 11 27 Jun 2026 · 144 MW · 30 28 Jun 2026 · 75 MW · 9 29 Jun 2026 · 431 MW · 54 30 Jun 2026 · 117 MW · 25 1 Jul 2026 · 93 MW · 20 2 Jul 2026 · 177 MW · 25 3 Jul 2026 · 40 MW · 11 4 Jul 2026 · 14 MW · 2
21 Jun 26 Jun 29 Jun 2 Jul

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (23 passes) and with what wind. Watch the film

The weather it burned in

28°high
46km/h · peak gust
29%lowest humidity

It had gone 28 days without rain (1 mm or more) when it started.

This area had burned before

81% of the perimeter overlaps earlier fires recorded since 2016: 10 ha in 2016, 5,225 ha in 2020, 4,128 ha in 2024. Part of it burned more than once, so the yearly figures add up to more than the 6,577 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 5.2% of the area of London (82 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Serengeti where it started
    5,608 ha reached on 21 Jun
    0.5 %
  2. 2,619 ha reached on 25 Jun
    0.5 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area0.16 ha
Residents< 20

Inside the perimeter there were about 0.16 hectares of built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
21 Jun 25.5 °C 41 % 46 km/h 0.0 mm High 28
22 Jun 24.1 °C 48 % 41 km/h 0.0 mm High 24
23 Jun 25.4 °C 43 % 35 km/h 0.0 mm Moderate 21
24 Jun 25.0 °C 46 % 35 km/h 0.2 mm Moderate 21
25 Jun 27.1 °C 33 % 30 km/h 0.0 mm Moderate 19
26 Jun 27.5 °C 29 % 24 km/h 0.0 mm Moderate 19
27 Jun 27.0 °C 31 % 26 km/h 0.0 mm Moderate 19
28 Jun 26.6 °C 35 % 32 km/h 0.0 mm High 23
29 Jun 27.4 °C 38 % 36 km/h 0.1 mm High 26
30 Jun 25.9 °C 42 % 39 km/h 0.1 mm High 30
1 Jul 25.1 °C 43 % 40 km/h 0.2 mm High 29
2 Jul 26.0 °C 39 % 28 km/h 0.0 mm Moderate 21
3 Jul 28.3 °C 31 % 26 km/h 0.0 mm High 25
4 Jul 26.9 °C 38 % 30 km/h 0.0 mm High 26
5 Jul after 25.0 °C 46 % 34 km/h 0.1 mm High 26
6 Jul after 25.5 °C 38 % 52 km/h 0.0 mm Very high 40
7 Jul after 26.0 °C 33 % 55 km/h 0.0 mm Very high 43
8 Jul after 26.2 °C 36 % 43 km/h 0.0 mm High 34
9 Jul after 27.2 °C 36 % 31 km/h 0.1 mm High 24
10 Jul after 27.0 °C 41 % 36 km/h 0.1 mm High 27
11 Jul after 24.9 °C 50 % 39 km/h 0.7 mm High 26
12 Jul after 25.6 °C 49 % 35 km/h 0.9 mm Moderate 19
13 Jul after 25.2 °C 45 % 36 km/h 0.0 mm High 24
14 Jul after 25.3 °C 44 % 40 km/h 0.1 mm High 29

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 14 Jun 2026
After · 11 Jul 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 27 June 2026 the air beside the fire reached 30 µg/m³ of PM2.5. That day averaged 17: 1.1 times the WHO daily guideline (15).

PM2.5 peak30 µg/m³
Days over the guideline4 days
PM1040 µg/m³
Optical depth0.64
23 Jun26 Jun29 Jun2 Jul5 Jul
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 209Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Tanzania

Frequently asked questions

How long did the Serengeti fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 21 June 2026 to 4 July 2026 (14 days). The perimeter dates it from 25 June 2026 to 4 July 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 8,170 hectares (81.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Serengeti (5,608 ha, 0.5 %); Bariadi (2,619 ha, 0.5 %).
What was the weather like?
During the fire the temperature reached 28.3 °C, humidity dropped to 29 % and gusts hit 46 km/h. The fire danger index (FWI) reached 30, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Tanzania (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 25 June 2026 → 21 June 2026.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 25 June 2026 to 4 July 2026. 209 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.