Skip to content
worldfires
TZ · Tanzania · –

Serengeti fire, 22 July 2020 Serengeti

Out · last detection

The fire started on in Serengeti, Tanzania, and satellites saw it burning for 6 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 6,927 hectares from heat detections, spread across a single municipality.

It is number 16 by size of the 63 fires with a page that started in Mara since 2016. Number 37 in Tanzania in 2020, of 187.

Burnt area
6,927ha
GWIS perimeter (Copernicus)
Duration
6days
22 Jul 2020 – 27 Jul 2020
Municipalities hit
1
districts
Started on
22 Jul
2020
Heat detections
240
in a single hotspot: 45 MW
Danger at start
13
Moderate · FWI index
Average daily power
223MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 22 Jul27 Jul
27 Jul 2020

How it evolved, day by day

22 Jul 2020 · 318 MW · 49 23 Jul 2020 · 231 MW · 21 24 Jul 2020 · 166 MW · 41 25 Jul 2020 · 388 MW · 53 26 Jul 2020 · 233 MW · 71 27 Jul 2020 · 5 MW · 5
22 Jul 25 Jul

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

28°high
33km/h · peak gust
32%lowest humidity

It had gone 29 days without rain (1 mm or more) when it started.

This area had burned before

61% of the perimeter overlaps earlier fires recorded since 2016: 3,266 ha in 2016, 110 ha in 2017, 2,392 ha in 2018, 346 ha in 2019. Part of it burned more than once, so the yearly figures add up to more than the 4,245 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 4.4% of the area of London (69 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Serengeti where it started
    6,974 ha reached on 22 Jul
    0.6 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area0.12 ha
Residents< 20

Inside the perimeter there were about 0.12 hectares of built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
22 Jul 26.8 °C 38 % 27 km/h 1.5 mm Moderate 13
23 Jul 27.6 °C 33 % 33 km/h 0.0 mm High 27
24 Jul 26.9 °C 34 % 28 km/h 0.0 mm High 25
25 Jul 27.9 °C 33 % 28 km/h 0.0 mm High 26
26 Jul 26.5 °C 32 % 29 km/h 0.0 mm High 26
27 Jul 26.5 °C 38 % 28 km/h 0.0 mm Moderate 20
28 Jul after 25.3 °C 40 % 35 km/h 0.0 mm High 28
29 Jul after 27.5 °C 39 % 31 km/h 0.6 mm High 28
30 Jul after 26.6 °C 41 % 36 km/h 0.1 mm High 27
31 Jul after 26.7 °C 37 % 35 km/h 0.3 mm High 32
1 Aug after 27.8 °C 31 % 35 km/h 0.0 mm High 32
2 Aug after 25.9 °C 33 % 46 km/h 0.0 mm Very high 40
3 Aug after 25.7 °C 33 % 46 km/h 0.0 mm Very high 41
4 Aug after 26.2 °C 37 % 31 km/h 0.0 mm High 32
5 Aug after 27.3 °C 35 % 30 km/h 0.0 mm High 28
6 Aug after 28.5 °C 26 % 27 km/h 0.0 mm High 30

Its twins: fires that started in the same weather

It started with an FWI of 13.3, a minimum humidity of 38% and 29 days without rain. Fires in the area that started in weather like this since 2016: 35.

FWI at the start 13.3
Minimum humidity 38 %
Days without rain 29
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Bunda fire, June 2021
5,649 ha 4 days FWI 20.1 Min. humidity 37 % 103 km away, in 2021

First rain (1 mm or more) after it ended: 8.8 mm on 17 Jun.

What happened to them

6 days
median duration
4,190 ha
median area
6 %
went past 10,000 ha
1.8 mm
rain at the end (median; 17 of 35 had it)

It was 1.7 times larger than the median of its twins and lasted 6 days, against 6 days.

Only 7 of its 35 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 18 of 35, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.8 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
33km/h · max. gust

It was considered over on 27 Jul, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 17 of 35, with a median of 1.8 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 15 Jul 2020
After · 3 Aug 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 240Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Tanzania

Frequently asked questions

How long did the Serengeti fire last?
GWIS (Copernicus) dates it between 22 July 2020 and 27 July 2020: 6 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 6,927 hectares (69.3 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Serengeti (6,974 ha, 0.6 %).
What was the weather like?
During the fire the temperature reached 27.9 °C, humidity dropped to 32 % and gusts hit 33 km/h. The fire danger index (FWI) reached 27, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Tanzania (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 35. Their median duration was 6 days and their median area 4,190 ha; 6 % went past 10,000 ha. Only 7 of its 35 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 18 of 35, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.8 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 240 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.