Skip to content
worldfires
GH · Ghana · –

Sene East fire, January 2020 Sene East, Sekyere Afram Plains North, Sene West

Out · last detection 16 Feb 2020, 14:15 UTC

The fire started on 5 January 2020 in Sene East, Ghana, and satellites saw it burning for 43 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 125,649 hectares from heat detections, spread across 4 municipalities.

This page is probably a fire complex, not a single fire. GWIS merges into one perimeter the fires that touch over weeks, which in large burning seasons can join dozens of separate fires. The total area is reliable; the origin and dates refer to the whole complex.

Other fire pages in the same area and on the same dates:

It is the largest fire in Bono East since 2016 (of 153 with a page). The largest in Ghana in 2020, of 111.

Burnt area
125,649ha
GWIS perimeter (Copernicus)
Duration
43days
5 Jan 2020 – 16 Feb 2020
Municipalities hit
4
districts
Started on
5 Jan
2020
Heat detections
5,292
in a single hotspot: 197 MW
Danger at start
40
Very high · FWI index
Average daily power
1.1GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 5 Jan16 Feb
16 Feb 2020

How it evolved, day by day

5 Jan 2020 · 47 MW · 12 6 Jan 2020 · 84 MW · 10 7 Jan 2020 · 139 MW · 22 8 Jan 2020 · 301 MW · 34 9 Jan 2020 · 259 MW · 28 10 Jan 2020 · 55 MW · 9 11 Jan 2020 · 111 MW · 18 12 Jan 2020 · 397 MW · 38 13 Jan 2020 · 219 MW · 24 14 Jan 2020 · 1,048 MW · 83 15 Jan 2020 · 1,073 MW · 103 16 Jan 2020 · 2,823 MW · 324 17 Jan 2020 · 3,050 MW · 302 18 Jan 2020 · 1,521 MW · 241 19 Jan 2020 · 1,448 MW · 180 20 Jan 2020 · 855 MW · 191 21 Jan 2020 · 1,390 MW · 260 22 Jan 2020 · 2,595 MW · 301 23 Jan 2020 · 5,271 MW · 458 24 Jan 2020 · 1,791 MW · 208 25 Jan 2020 · 862 MW · 239 26 Jan 2020 · 2,762 MW · 243 27 Jan 2020 · 1,483 MW · 206 28 Jan 2020 · 386 MW · 77 29 Jan 2020 · 2,414 MW · 150 30 Jan 2020 · 4,104 MW · 270 31 Jan 2020 · 3,359 MW · 340 1 Feb 2020 · 1,206 MW · 206 2 Feb 2020 · 1,020 MW · 115 3 Feb 2020 · 483 MW · 53 4 Feb 2020 · 667 MW · 72 5 Feb 2020 · 575 MW · 113 6 Feb 2020 · 285 MW · 71 7 Feb 2020 · 2,080 MW · 129 8 Feb 2020 · 349 MW · 86 9 Feb 2020 · 136 MW · 24 10 Feb 2020 · 5 MW · 3 11 Feb 2020 · 237 MW · 19 12 Feb 2020 · 28 MW · 6 13 Feb 2020 · 26 MW · 9 14 Feb 2020 · 4 MW · 1 15 Feb 2020 · 105 MW · 9 16 Feb 2020 · 13 MW · 5
5 Jan 14 Jan 23 Jan 1 Feb 10 Feb

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

39°high
30km/h · peak gust
11%lowest humidity

It had gone 28 days without rain (1 mm or more) when it started. Rain came after the fire: 1.1 mm on 25 Feb.

This area had burned before

89% of the perimeter overlaps earlier fires recorded since 2016: 36,127 ha in 2016, 51,505 ha in 2017, 71,081 ha in 2018, 66,207 ha in 2019. Part of it burned more than once, so the yearly figures add up to more than the 112,447 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 79% of the area of London (1,256 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Sene East where it started
    67,350 ha reached on 5 Jan
    15 %
  2. 34,538 ha reached on 5 Jan
    9.7 %
  3. 25,853 ha reached on 5 Jan
    7.9 %
  4. 57 ha reached on 5 Jan
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area0.11 ha
Residents< 20

Inside the perimeter there were about 0.11 hectares of built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
5 Jan 34.3 °C 24 % 18 km/h 0.0 mm Very high 40
6 Jan 34.6 °C 25 % 19 km/h 0.0 mm High 37
7 Jan 35.6 °C 23 % 20 km/h 0.0 mm High 38
8 Jan 36.8 °C 27 % 22 km/h 0.0 mm Very high 39
9 Jan 36.7 °C 30 % 28 km/h 0.0 mm High 36
10 Jan 37.0 °C 34 % 23 km/h 0.0 mm High 35
11 Jan 34.7 °C 46 % 28 km/h 6.4 mm Low 6
12 Jan 37.3 °C 34 % 27 km/h 0.0 mm High 22
13 Jan 36.7 °C 37 % 29 km/h 0.0 mm High 25
14 Jan 35.1 °C 33 % 22 km/h 0.0 mm High 25
15 Jan 36.4 °C 16 % 28 km/h 0.0 mm High 37
16 Jan 35.5 °C 17 % 28 km/h 0.0 mm Very high 39
17 Jan 37.1 °C 31 % 26 km/h 0.0 mm High 34
18 Jan 36.1 °C 38 % 20 km/h 0.0 mm High 31
19 Jan 35.3 °C 33 % 24 km/h 0.0 mm High 31
20 Jan 35.9 °C 37 % 26 km/h 0.0 mm High 32
21 Jan 36.0 °C 33 % 27 km/h 0.0 mm High 32
22 Jan 36.5 °C 32 % 28 km/h 0.0 mm High 32
23 Jan 37.2 °C 31 % 27 km/h 0.0 mm High 32
24 Jan 36.8 °C 21 % 30 km/h 0.0 mm High 37
25 Jan 35.2 °C 22 % 26 km/h 0.0 mm High 36
26 Jan 35.9 °C 23 % 20 km/h 0.0 mm High 38
27 Jan 36.3 °C 24 % 20 km/h 0.0 mm Very high 39
28 Jan 35.5 °C 32 % 17 km/h 0.0 mm High 36
29 Jan 37.0 °C 19 % 27 km/h 0.0 mm Very high 38
30 Jan 37.6 °C 22 % 24 km/h 0.0 mm Very high 38
31 Jan 37.2 °C 31 % 19 km/h 0.0 mm High 37
1 Feb 37.0 °C 29 % 25 km/h 0.0 mm Very high 38
2 Feb 37.1 °C 18 % 24 km/h 0.0 mm Very high 41
3 Feb 36.7 °C 14 % 23 km/h 0.0 mm Very high 45
4 Feb 36.7 °C 14 % 21 km/h 0.0 mm Very high 44
5 Feb 36.5 °C 23 % 20 km/h 0.0 mm Very high 43
6 Feb 36.6 °C 26 % 26 km/h 0.0 mm Very high 42
7 Feb 37.3 °C 11 % 30 km/h 0.0 mm Very high 48
8 Feb 37.7 °C 13 % 27 km/h 0.0 mm Very high 48
9 Feb 37.2 °C 27 % 23 km/h 0.0 mm Very high 44
10 Feb 35.2 °C 39 % 22 km/h 0.0 mm High 33
11 Feb 36.3 °C 20 % 30 km/h 0.0 mm Very high 39
12 Feb 36.4 °C 16 % 30 km/h 0.0 mm Very high 43
13 Feb 36.4 °C 11 % 21 km/h 0.0 mm Very high 46
14 Feb 36.8 °C 13 % 26 km/h 0.0 mm Very high 49
15 Feb 38.7 °C 11 % 22 km/h 0.0 mm Very high 48
16 Feb 38.9 °C 18 % 19 km/h 0.0 mm Very high 47
17 Feb after 39.3 °C 26 % 28 km/h 0.0 mm Very high 45
18 Feb after 38.9 °C 29 % 28 km/h 0.0 mm Very high 42
19 Feb after 39.2 °C 28 % 27 km/h 0.0 mm Very high 42
20 Feb after 37.7 °C 39 % 25 km/h 0.3 mm High 34
21 Feb after 39.6 °C 26 % 27 km/h 0.0 mm Very high 38
22 Feb after 38.4 °C 26 % 25 km/h 0.0 mm Very high 39
23 Feb after 37.5 °C 33 % 30 km/h 0.0 mm High 38
24 Feb after 38.4 °C 32 % 26 km/h 0.0 mm High 38
25 Feb after 37.3 °C 28 % 23 km/h 1.1 mm High 31

Its twins: fires that started in the same weather

It started with an FWI of 39.5, a minimum humidity of 24% and 28 days without rain. Fires in the area that started in weather like this since 2016: 18.

FWI at the start 39.5
Minimum humidity 24 %
Days without rain 28
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Sekyere Central fire, January 2016
2,055 ha 11 days FWI 37.8 Min. humidity 24 % 51 km away, in 2016

First rain (1 mm or more) after it ended: 1.2 mm on 20 Jan.

What happened to them

11 days
median duration
2,665 ha
median area
100 %
went past 1,000 ha
1.8 mm
rain at the end (median; 9 of 18 had it)

It was 47.1 times larger than the median of its twins and lasted 43 days, against 11 days.

None of its 18 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 9 of 18, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.8 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.1 mmfirst rain
25 Feb9 days after it ended
30km/h · max. gust

It was considered over on 16 Feb, and on 25 Feb 1.1 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 9 of 18, with a median of 1.8 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 29 Dec 2019
After · 23 Feb 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 5,292Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Ghana

Frequently asked questions

How long did the Sene East fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 5 January 2020 to 16 February 2020 (43 days). The perimeter dates it from 11 January 2020 to 11 February 2020.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 125,649 hectares (1,256.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 4 municipalities: Sene East (67,350 ha, 15 %); Sekyere Afram Plains North (34,538 ha, 9.7 %); Sene West (25,853 ha, 7.9 %); Kwahu Afram Plains South (57 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 38.9 °C, humidity dropped to 11 % and gusts hit 30 km/h. The fire danger index (FWI) reached 49, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Ghana (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 18. Their median duration was 11 days and their median area 2,665 ha; 100 % went past 1,000 ha. None of its 18 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 9 of 18, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.8 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 11 February 2020 → 16 February 2020.
  2. Start date: 11 January 2020 → 5 January 2020.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 10 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 11 January 2020 to 11 February 2020. 5,292 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.