Skip to content
worldfires
RU · Russia · –

Selemdzhinsky District fire, 11 July 2023 Selemdzhinsky District

Out · last detection 23 Jul 2023, 18:19 UTC

The fire started on 11 July 2023 in Selemdzhinsky District, Russia, and satellites saw it burning for 14 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 12,166 hectares from heat detections, spread across a single municipality.

It is the 119th largest in Amur Oblast since 2016 (of 491 with a page). Number 73 in Russia in 2023, of 450.

Burnt area
12,166ha
GWIS perimeter (Copernicus)
Duration
14days
11 Jul 2023 – 24 Jul 2023
Municipalities hit
1
districts
Started on
11 Jul
2023
Heat detections
1,400
in a single hotspot: 71 MW
Danger at start
11
Low · FWI index
Average daily power
581MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 11 Jul24 Jul
23 Jul 2023

How it evolved, day by day

11 Jul 2023 · 13 MW · 3 12 Jul 2023 · 33 MW · 12 13 Jul 2023 · 133 MW · 28 14 Jul 2023 · 314 MW · 48 15 Jul 2023 · 792 MW · 42 16 Jul 2023 · 887 MW · 181 17 Jul 2023 · 564 MW · 144 18 Jul 2023 · 650 MW · 142 19 Jul 2023 · 644 MW · 153 20 Jul 2023 · 792 MW · 126 21 Jul 2023 · 500 MW · 129 22 Jul 2023 · 1,454 MW · 218 23 Jul 2023 · 783 MW · 174
11 Jul 14 Jul 17 Jul 22 Jul

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

30°high
44km/h · peak gust
28%lowest humidity

It had gone one day without rain (1 mm or more) when it started. Rain came after the fire: 4.7 mm on 25 Jul.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 7.7% of the area of London (122 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Selemdzhinsky District where it started
    12,285 ha reached on 11 Jul
    0.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
11 Jul 27.1 °C 31 % 23 km/h 0.0 mm Low 11
12 Jul 28.1 °C 30 % 20 km/h 0.0 mm Moderate 13
13 Jul 28.5 °C 33 % 20 km/h 0.0 mm Moderate 15
14 Jul 29.7 °C 28 % 21 km/h 0.0 mm Moderate 16
15 Jul 27.4 °C 30 % 40 km/h 0.0 mm High 23
16 Jul 25.9 °C 30 % 25 km/h 0.0 mm Moderate 18
17 Jul 27.5 °C 36 % 30 km/h 0.0 mm Moderate 19
18 Jul 29.5 °C 32 % 24 km/h 0.0 mm Moderate 19
19 Jul 28.1 °C 36 % 20 km/h 0.0 mm Moderate 18
20 Jul 27.4 °C 42 % 30 km/h 0.3 mm Moderate 19
21 Jul 21.5 °C 60 % 36 km/h 5.0 mm Very low 2
22 Jul 24.3 °C 33 % 44 km/h 0.0 mm Moderate 12
23 Jul 27.5 °C 30 % 26 km/h 0.0 mm Moderate 15
24 Jul 25.6 °C 35 % 37 km/h 0.0 mm Moderate 20
25 Jul after 19.9 °C 63 % 31 km/h 4.7 mm Very low 3

Its twins: fires that started in the same weather

It started with an FWI of 10.6, a minimum humidity of 31% and 1 day without rain. Fires in the area that started in weather like this since 2016: 16.

FWI at the start 10.6
Minimum humidity 31 %
Days without rain 1
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Tuguro-Chumikansky Rayon fire, July 2017
5,240 ha 9 days FWI 11.3 Min. humidity 32 % 81 km away, in 2017

First rain (1 mm or more) after it ended: 1.3 mm on 10 Jul.

What happened to them

7 days
median duration
5,002 ha
median area
12 %
went past 10,000 ha
5.2 mm
rain at the end (median; 16 of 16 had it)

It was 2.4 times larger than the median of its twins and lasted 14 days, against 7 days.

Only 2 of its 16 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. All of them had rain in the ten days after the end: the first rainy day brought a median of 5.2 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

4.7 mmfirst rain
25 Julthe day after it ended
44km/h · max. gust

It was considered over on 24 Jul, and on 25 Jul 4.7 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 16 of 16, with a median of 5.2 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 4 Jul 2023
After · 31 Jul 2023

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 26 July 2023 the air beside the fire reached 984 µg/m³ of PM2.5. That day averaged 513: 34 times the WHO daily guideline (15).

PM2.5 peak984 µg/m³
Days over the guideline17 days
PM101,408 µg/m³
Optical depth5.30
9 Jul13 Jul17 Jul21 Jul25 Jul
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 1,400Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Russia

Frequently asked questions

How long did the Selemdzhinsky District fire last?
GWIS (Copernicus) dates it between 11 July 2023 and 24 July 2023: 14 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 12,166 hectares (121.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Selemdzhinsky District (12,285 ha, 0.3 %).
What was the weather like?
During the fire the temperature reached 29.7 °C, humidity dropped to 28 % and gusts hit 44 km/h. The fire danger index (FWI) reached 23, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 16. Their median duration was 7 days and their median area 5,002 ha; 12 % went past 10,000 ha. Only 2 of its 16 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. All of them had rain in the ten days after the end: the first rainy day brought a median of 5.2 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 1,400 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.