Skip to content
worldfires
ZW · Zimbabwe · –

Seke fire, October 2022 Chikomba, Seke

Out · last detection 12 Oct 2022, 11:18 UTC

The fire started on 10 October 2022 in Seke, Zimbabwe, and satellites saw it burning for 3 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,017 hectares from heat detections, spread across 2 municipalities.

It is the 101th largest in Mashonaland East since 2016 (of 108 with a page). Number 335 in Zimbabwe in 2022, of 346.

Burnt area
1,017ha
GWIS perimeter (Copernicus)
Duration
3days
10 Oct 2022 – 12 Oct 2022
Municipalities hit
2
districts
Started on
10 Oct
2022
Heat detections
24
in a single hotspot: 63 MW
Danger at start
102
Very extreme · FWI index
Average daily power
230MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 10 Oct12 Oct
12 Oct 2022

How it evolved, day by day

10 Oct 2022 · 387 MW · 20 12 Oct 2022 · 74 MW · 4
10 Oct 12 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

32°high
63km/h · peak gust
14%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

59% of the perimeter overlaps earlier fires recorded since 2016: 596 ha in 2017.

How big is it?

10 km
It burned the equivalent of 0.6% of the area of London (10 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. 728 ha
    0.1 %
  2. Seke where it started
    295 ha
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 54 % of the area in Zimbabwe Strong wind: 11 % of the area in Zimbabwe 60 days without rain: 63 % of the area in Zimbabwe

Day High Min. humidity Peak gust Rain Danger (FWI)
10 Oct 31.9 °C 16 % 63 km/h 0.0 mm Very extreme 102
11 Oct 30.3 °C 15 % 46 km/h 0.0 mm Very extreme 79
12 Oct 30.6 °C 14 % 39 km/h 0.0 mm Very extreme 71
13 Oct after 31.4 °C 16 % 40 km/h 0.0 mm Very extreme 71
14 Oct after 31.9 °C 12 % 36 km/h 0.0 mm Extreme 64
15 Oct after 31.1 °C 21 % 38 km/h 0.0 mm Extreme 62
16 Oct after 29.9 °C 25 % 43 km/h 0.0 mm Extreme 61
17 Oct after 30.4 °C 19 % 40 km/h 0.0 mm Extreme 57
18 Oct after 30.1 °C 18 % 38 km/h 0.0 mm Extreme 58
19 Oct after 28.4 °C 22 % 42 km/h 0.0 mm Extreme 63
20 Oct after 30.8 °C 19 % 43 km/h 0.0 mm Extreme 53
21 Oct after 30.6 °C 17 % 42 km/h 0.0 mm Extreme 54
22 Oct after 29.9 °C 23 % 32 km/h 0.0 mm Very high 48

Its twins: fires that started in the same weather

It started with an FWI of 101.6, a minimum humidity of 16% and more than two months without rain. Fires in the area that started in weather like this since 2016: 6.

FWI at the start 101.6
Minimum humidity 16 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Chikomba fire, September 2019
1,026 ha 2 days FWI 94.4 Min. humidity 10 % 30 km away, in 2019

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

Fires in the area that started in similar weather: 6. With fewer than 15 we give no figures: they would be more noise than signal.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
63km/h · max. gust

It was considered over on 12 Oct, and not even 1 mm fell in the following ten days: it went out without rain.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 3 Oct 2022
After · 19 Oct 2022

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 14 October 2022 the air beside the fire reached 57 µg/m³ of PM2.5. That day averaged 34: 2.2 times the WHO daily guideline (15).

PM2.5 peak57 µg/m³
Days over the guideline6 days
PM1083 µg/m³
Optical depth1.04
8 Oct10 Oct12 Oct14 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 24Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Zimbabwe

Frequently asked questions

How long did the Seke fire last?
GWIS (Copernicus) dates it between 10 October 2022 and 12 October 2022: 3 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,017 hectares (10.2 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Chikomba (728 ha, 0.1 %); Seke (295 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 31.9 °C, humidity dropped to 14 % and gusts hit 63 km/h. The fire danger index (FWI) reached 102, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Zimbabwe (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Name: Chikomba → Seke.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 24 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.