Saurimo fire, 2 August 2026 Saurimo, Muconda
The fire started on 2 August 2026 in Saurimo, Angola, and satellites saw it burning for 12 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 6,802 hectares from heat detections, spread across 2 municipalities.
It is the 119th largest in Lunda Sul since 2016 (of 240 with a page). Number 285 in Angola in 2026, of 486.
- Burnt area
- 6,802ha
- GWIS perimeter (Copernicus)
- Duration
- 12days
- 2 Aug 2026 – 13 Aug 2026
- Municipalities hit
- 2
- municipalities
- Started on
- 2 Aug
- 2026
- Heat detections
- 141
- in a single hotspot: 57 MW
- Danger at start
- 40
- Very high · FWI index
- Energy released
- 843MW
- sum of detected power
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone more than two months without rain (1 mm or more) when it started.
This area had burned before
99% of the perimeter overlaps earlier fires recorded since 2016: 4,179 ha in 2016, 1,860 ha in 2017, 2,071 ha in 2018, 4,471 ha in 2019, 4,004 ha in 2020, 3,795 ha in 2021, 1,231 ha in 2022, 418 ha in 2023, 1,527 ha in 2024, 2,442 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 6,708 ha that had burned before.
- 3,757 ha Muconda fire, July 2021 9,438 ha in total; the hectares shown are those it shares with this fire
- 3,297 ha Muconda fire, July 2019 5,115 ha in total; the hectares shown are those it shares with this fire
- 2,427 ha Saurimo fire, July 2025 5,239 ha in total; the hectares shown are those it shares with this fire
- 1,741 ha Saurimo fire, June 2016 12,487 ha in total; the hectares shown are those it shares with this fire
- 790 ha Saurimo fire, July 2020 6,810 ha in total; the hectares shown are those it shares with this fire
What happened to each town
-
Saurimo where it started6,700 ha reached on 30 Jul0.3 %
-
150 ha reached on 2 Aug0.0 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance is from the town centre to the nearest fire: staying a kilometre away does not mean it reached the houses.
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 30 Jul | 30.3 °C | 21 % | 39 km/h | 0.0 mm | Very high 40 |
| 31 Jul | 29.7 °C | 25 % | 40 km/h | 0.0 mm | Very high 41 |
| 1 Aug | 30.0 °C | 21 % | 37 km/h | 0.0 mm | Very high 42 |
| 2 Aug | 30.4 °C | 18 % | 35 km/h | 0.0 mm | Very high 42 |
| 3 Aug | 30.0 °C | 21 % | 34 km/h | 0.0 mm | Very high 42 |
| 4 Aug | 30.8 °C | 20 % | 24 km/h | 0.0 mm | Very high 41 |
| 5 Aug | 31.4 °C | 14 % | 32 km/h | 0.0 mm | Very high 45 |
| 6 Aug | 31.2 °C | 15 % | 34 km/h | 0.0 mm | Very high 45 |
| 7 Aug | 30.7 °C | 21 % | 36 km/h | 0.0 mm | Very high 45 |
| 8 Aug | 30.6 °C | 23 % | 39 km/h | 0.0 mm | Very high 45 |
| 9 Aug | 31.1 °C | 25 % | 35 km/h | 0.0 mm | Very high 43 |
| 10 Aug | 32.1 °C | 16 % | 24 km/h | 0.0 mm | Very high 44 |
| 11 Aug | 31.0 °C | 19 % | 28 km/h | 0.0 mm | Very high 45 |
| 12 Aug | 31.0 °C | 24 % | 38 km/h | 0.0 mm | Very high 44 |
| 13 Aug | 30.4 °C | 32 % | 37 km/h | 0.0 mm | Very high 38 |
| 14 Aug after | 30.6 °C | 30 % | 39 km/h | 0.2 mm | Very high 40 |
| 15 Aug after | 30.7 °C | 28 % | 37 km/h | 0.0 mm | Very high 41 |
| 16 Aug after | 30.2 °C | 24 % | 41 km/h | 0.0 mm | Very high 41 |
| 17 Aug after | 30.5 °C | 19 % | 39 km/h | 0.0 mm | Very high 41 |
| 18 Aug after | 31.2 °C | 14 % | 36 km/h | 0.0 mm | Very high 45 |
| 19 Aug after | 31.5 °C | 16 % | 36 km/h | 0.0 mm | Very high 44 |
| 20 Aug after | 30.8 °C | 18 % | 31 km/h | 0.0 mm | Very high 45 |
| 21 Aug after | 31.1 °C | 21 % | 28 km/h | 0.0 mm | Very high 44 |
| 22 Aug after | 32.2 °C | 25 % | 31 km/h | 0.0 mm | Very high 43 |
| 23 Aug after | 33.0 °C | 22 % | 41 km/h | 0.0 mm | Very high 47 |
| 24 Aug after | 33.0 °C | 20 % | 36 km/h | 0.0 mm | Very high 43 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · CopernicusOn 3 August 2026 the air beside the fire reached 141 µg/m³ of PM2.5. That day averaged 64: 4.2 times the WHO daily guideline (15).
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table · 141Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
- 12,487 haSaurimo28 June 2016 · 14 days · 9 km away
- 11,554 haSaurimo13 August 2026 · 17 days · 18 km away
- 47,992 haMuconda29 July 2026 · 34 days · 20 km away
- 9,636 haMuconda10 July 2020 · 9 days · 28 km away
- 11,513 haMuconda15 July 2020 · 11 days · 40 km away
- 9,737 haMuconda5 August 2017 · 11 days · 40 km away
Frequently asked questions
- How long did the Saurimo fire last?
- GWIS (Copernicus) dates it between 2 August 2026 and 13 August 2026: 12 days between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 6,802 hectares (68.0 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire entered 2 municipalities: Saurimo (6,700 ha, 0.3 %); Muconda (150 ha, 0.0 %).
- What was the weather like?
- During the fire the temperature reached 32.1 °C, humidity dropped to 14 % and gusts hit 40 km/h. The fire danger index (FWI) reached 45, class Very high.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Angola (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Satellite cross-check
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.