Skip to content
worldfires
RU · Russia · –

Sargatsky District fire, 25 April 2022 Sargatsky District, Lyubinsky District

Out · last detection

The fire started on in Sargatsky District, Russia, and satellites saw it burning for 11 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,537 hectares from heat detections, spread across 2 municipalities.

It is number 122 by size of the 148 fires with a page that started in Omsk Oblast since 2016. Number 341 in Russia in 2022, of 400.

Burnt area
3,537ha
GWIS perimeter (Copernicus)
Duration
11days
25 Apr 2022 – 5 May 2022
Municipalities hit
2
districts
Started on
25 Apr
2022
Heat detections
117
in a single hotspot: 48 MW
Danger at start
10
Low · FWI index
Average daily power
124MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 25 Apr5 May
2 May 2022

How it evolved, day by day

25 Apr 2022 · 133 MW · 15 26 Apr 2022 · 1 MW · 1 28 Apr 2022 · 151 MW · 29 29 Apr 2022 · 383 MW · 53 30 Apr 2022 · 58 MW · 14 2 May 2022 · 20 MW · 5
25 Apr 29 Apr

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

27°high
53km/h · peak gust
12%lowest humidity

It had gone 3 days without rain (1 mm or more) when it started. Rain came after the fire: 1.0 mm on 15 May.

This area had burned before

12% of the perimeter overlaps earlier fires recorded since 2016: 407 ha in 2021.

How big is it?

10 km
It burned the equivalent of 2.2% of the area of London (35 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Sargatsky District where it started
    2,049 ha reached on 25 Apr
    0.6 %
  2. 1,471 ha reached on 28 Apr
    0.4 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area0.24 ha
Residents< 20

Inside the perimeter there were about 0.24 hectares of built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
25 Apr 14.4 °C 18 % 31 km/h 0.0 mm Low 10
26 Apr 14.9 °C 36 % 29 km/h 0.7 mm Low 10
27 Apr 22.4 °C 22 % 31 km/h 0.0 mm Moderate 17
28 Apr 27.3 °C 19 % 50 km/h 0.1 mm High 24
29 Apr 25.9 °C 19 % 47 km/h 0.0 mm High 31
30 Apr 15.5 °C 39 % 44 km/h 0.0 mm High 22
1 May 8.9 °C 44 % 49 km/h 0.6 mm Moderate 19
2 May 11.6 °C 37 % 53 km/h 1.0 mm Low 10
3 May 13.1 °C 22 % 46 km/h 0.1 mm Moderate 14
4 May 18.4 °C 12 % 29 km/h 0.0 mm Moderate 20
5 May 20.9 °C 15 % 36 km/h 0.0 mm High 32
6 May after 21.5 °C 18 % 90 km/h 0.0 mm Extreme 66
7 May after 9.2 °C 21 % 60 km/h 0.0 mm Very high 49
8 May after 19.3 °C 16 % 46 km/h 0.0 mm High 35
9 May after 21.3 °C 15 % 21 km/h 0.0 mm High 29
10 May after 21.0 °C 19 % 49 km/h 0.0 mm Very high 47
11 May after 18.2 °C 17 % 48 km/h 0.0 mm Extreme 50
12 May after 21.9 °C 22 % 26 km/h 0.8 mm High 22
13 May after 24.5 °C 17 % 26 km/h 0.0 mm High 25
14 May after 23.7 °C 30 % 44 km/h 0.3 mm Very high 39
15 May after 22.4 °C 21 % 41 km/h 1.0 mm High 24

Its twins: fires that started in the same weather

It started with an FWI of 9.9, a minimum humidity of 18% and 3 days without rain. Fires in the area that started in weather like this since 2017: 18.

FWI at the start 9.9
Minimum humidity 18 %
Days without rain 3
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Krutinsky District fire, April 2023
5,222 ha 6 days FWI 9.3 Min. humidity 18 % 144 km away, in 2023

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

4 days
median duration
5,268 ha
median area
6 %
went past 10,000 ha
1.7 mm
rain at the end (median; 15 of 18 had it)

It burned an area similar to its twins (3,537 ha against a median of 5,268 ha) and lasted 11 days, against 4 days.

In 3 of 18, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.7 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.0 mmfirst rain
15 May10 days after it ended
53km/h · max. gust

It was considered over on 5 May, and on 15 May 1.0 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 15 of 18, with a median of 1.7 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2017.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 18 Apr 2022
After · 12 May 2022

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 117Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Russia

Frequently asked questions

How long did the Sargatsky District fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 25 April 2022 to 5 May 2022 (11 days). The perimeter dates it from 25 April 2022 to 2 May 2022.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,537 hectares (35.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Sargatsky District (2,049 ha, 0.6 %); Lyubinsky District (1,471 ha, 0.4 %).
What was the weather like?
During the fire the temperature reached 27.3 °C, humidity dropped to 12 % and gusts hit 53 km/h. The fire danger index (FWI) reached 32, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2017 with a similar FWI, humidity and dry spell: 18. Their median duration was 4 days and their median area 5,268 ha; 6 % went past 10,000 ha. In 3 of 18, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.7 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 2 May 2022 → 5 May 2022.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 25 April 2022 to 2 May 2022. 117 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.