Skip to content
worldfires
AO · Angola · –

Sanza Pombo fire, August 2021 Sanza Pombo

Out · last detection 14 Sept 2021, 12:31 UTC

The fire started on 29 August 2021 in Sanza Pombo, Angola, and satellites saw it burning for 17 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 5,389 hectares from heat detections, spread across a single municipality.

It is the 26th largest in Uíge since 2016 (of 27 with a page). Number 110 in Angola in 2021, of 126.

Burnt area
5,389ha
GWIS perimeter (Copernicus)
Duration
17days
29 Aug 2021 – 14 Sept 2021
Municipalities hit
1
municipalities
Started on
29 Aug
2021
Heat detections
204
in a single hotspot: 113 MW
Danger at start
14
Moderate · FWI index
Average daily power
237MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 29 Aug14 Sept
14 Sept 2021

How it evolved, day by day

29 Aug 2021 · 12 MW · 1 30 Aug 2021 · 83 MW · 11 31 Aug 2021 · 118 MW · 8 2 Sept 2021 · 843 MW · 48 3 Sept 2021 · 37 MW · 2 4 Sept 2021 · 1,400 MW · 82 5 Sept 2021 · 152 MW · 4 6 Sept 2021 · 24 MW · 4 7 Sept 2021 · 118 MW · 9 8 Sept 2021 · 166 MW · 9 9 Sept 2021 · 42 MW · 3 10 Sept 2021 · 152 MW · 5 13 Sept 2021 · 59 MW · 8 14 Sept 2021 · 117 MW · 10
29 Aug 4 Sept 8 Sept 13 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

31°high
37km/h · peak gust
28%lowest humidity

It had gone one day without rain (1 mm or more) when it started. Rain came after the fire: 4.6 mm on 15 Sept.

This area had burned before

87% of the perimeter overlaps earlier fires recorded since 2016: 1,200 ha in 2016, 1,319 ha in 2017, 2,683 ha in 2018, 1,644 ha in 2019, 3,142 ha in 2020. Part of it burned more than once, so the yearly figures add up to more than the 4,709 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 3.4% of the area of London (54 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Sanza Pombo where it started
    5,424 ha reached on 29 Aug
    1.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area4.1 ha
Residents≈ 400

Inside the perimeter there were about 4.1 hectares of built-up land and about 400 residents (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
29 Aug 29.5 °C 47 % 27 km/h 0.2 mm Moderate 14
30 Aug 29.9 °C 44 % 30 km/h 0.0 mm Moderate 16
31 Aug 28.9 °C 45 % 29 km/h 0.1 mm Moderate 17
1 Sept 31.2 °C 29 % 30 km/h 0.0 mm High 23
2 Sept 31.3 °C 28 % 37 km/h 0.0 mm High 26
3 Sept 27.8 °C 45 % 35 km/h 0.1 mm High 22
4 Sept 29.2 °C 42 % 29 km/h 0.1 mm High 22
5 Sept 29.5 °C 41 % 27 km/h 0.0 mm High 21
6 Sept 29.2 °C 41 % 35 km/h 0.8 mm Moderate 18
7 Sept 30.3 °C 44 % 34 km/h 0.6 mm Moderate 18
8 Sept 30.8 °C 42 % 25 km/h 0.0 mm Moderate 20
9 Sept 30.9 °C 42 % 25 km/h 0.0 mm Moderate 20
10 Sept 31.1 °C 42 % 31 km/h 0.5 mm Moderate 21
11 Sept 27.8 °C 47 % 28 km/h 0.2 mm Moderate 21
12 Sept 27.9 °C 51 % 24 km/h 0.6 mm Moderate 17
13 Sept 29.7 °C 42 % 26 km/h 0.0 mm Moderate 19
14 Sept 30.5 °C 45 % 35 km/h 3.3 mm Low 7
15 Sept after 30.3 °C 45 % 36 km/h 4.6 mm Very low 5

Its twins: fires that started in the same weather

It started with an FWI of 13.7, a minimum humidity of 47% and 1 day without rain. Fires in the area that started in weather like this since 2016: 18.

FWI at the start 13.7
Minimum humidity 47 %
Days without rain 1
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Quitexe fire, September 2023
6,671 ha 10 days FWI 12.9 Min. humidity 47 % 181 km away, in 2023

First rain (1 mm or more) after it ended: 2.9 mm on 29 Sept.

What happened to them

15 days
median duration
6,485 ha
median area
22 %
went past 10,000 ha
2.6 mm
rain at the end (median; 13 of 18 had it)

It burned an area similar to its twins (5,389 ha against a median of 6,485 ha) and lasted 17 days, against 15 days.

In 5 of 18, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.6 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

4.6 mmfirst rain
15 Septthe day after it ended
37km/h · max. gust

It was considered over on 14 Sept, and on 15 Sept 4.6 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 13 of 18, with a median of 2.6 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 22 Aug 2021
After · 21 Sept 2021

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 204Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Angola

Frequently asked questions

How long did the Sanza Pombo fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 29 August 2021 to 14 September 2021 (17 days). The perimeter dates it from 31 August 2021 to 8 September 2021.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 5,389 hectares (53.9 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Sanza Pombo (5,424 ha, 1.1 %).
What was the weather like?
During the fire the temperature reached 31.3 °C, humidity dropped to 28 % and gusts hit 37 km/h. The fire danger index (FWI) reached 26, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Angola (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 18. Their median duration was 15 days and their median area 6,485 ha; 22 % went past 10,000 ha. In 5 of 18, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.6 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 8 September 2021 → 14 September 2021.
  2. Start date: 31 August 2021 → 29 August 2021.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 31 August 2021 to 8 September 2021. 204 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.