Skip to content
worldfires
MX · Mexico · –

Santiago Niltepec fire, 30 January 2026 Santiago Niltepec

Out · last detection 12 Feb 2026, 19:04 UTC

The fire started on 30 January 2026 in Santiago Niltepec, Mexico, and satellites saw it burning for 14 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 2,751 hectares from heat detections, spread across a single municipality.

Number 41 in Mexico in 2026, of 145.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

The power measured by the satellite is low (15.4 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
2,751ha
GWIS perimeter (Copernicus)
Duration
14days
30 Jan 2026 – 12 Feb 2026
Municipalities hit
1
municipalities
Started on
30 Jan
2026
Heat detections
132
in a single hotspot: 15 MW
Danger at start
38
High · FWI index
Average daily power
51MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 30 Jan12 Feb
12 Feb 2026

How it evolved, day by day

30 Jan 2026 · 8 MW · 1 31 Jan 2026 · 48 MW · 16 1 Feb 2026 · 109 MW · 23 2 Feb 2026 · 146 MW · 25 3 Feb 2026 · 128 MW · 30 4 Feb 2026 · 73 MW · 14 5 Feb 2026 · 22 MW · 6 8 Feb 2026 · 16 MW · 2 9 Feb 2026 · 6 MW · 2 10 Feb 2026 · 15 MW · 2 11 Feb 2026 · 30 MW · 7 12 Feb 2026 · 9 MW · 4
30 Jan 2 Feb 5 Feb 10 Feb

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

34°high
91km/h · peak gust
22%lowest humidity

It had gone 2 days without rain (1 mm or more) when it started. Rain came after the fire: 2.4 mm on 20 Feb.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 1.7% of the area of London (28 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Santiago Niltepec where it started
    2,768 ha reached on 30 Jan
    5.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Strong wind: 19 % of the area in Mexico

Day High Min. humidity Peak gust Rain Danger (FWI)
30 Jan 31.2 °C 35 % 54 km/h 0.0 mm High 38
31 Jan 26.0 °C 42 % 91 km/h 1.3 mm Very high 47
1 Feb 27.7 °C 41 % 66 km/h 0.0 mm Very high 39
2 Feb 28.3 °C 23 % 60 km/h 0.0 mm Very high 49
3 Feb 31.5 °C 26 % 33 km/h 0.0 mm High 36
4 Feb 31.3 °C 32 % 61 km/h 0.0 mm Very high 44
5 Feb 28.2 °C 48 % 79 km/h 0.6 mm Extreme 56
6 Feb 28.9 °C 41 % 55 km/h 0.0 mm High 35
7 Feb 30.4 °C 22 % 48 km/h 0.0 mm Very high 48
8 Feb 31.4 °C 29 % 41 km/h 0.0 mm Very high 42
9 Feb 31.4 °C 33 % 45 km/h 0.0 mm Very high 43
10 Feb 33.6 °C 36 % 26 km/h 0.0 mm High 31
11 Feb 34.5 °C 28 % 53 km/h 0.0 mm High 38
12 Feb 33.6 °C 38 % 48 km/h 0.0 mm Very high 46
13 Feb after 35.1 °C 39 % 37 km/h 0.0 mm High 37
14 Feb after 34.3 °C 38 % 40 km/h 0.0 mm High 37
15 Feb after 32.9 °C 48 % 33 km/h 0.9 mm Moderate 21
16 Feb after 35.6 °C 38 % 40 km/h 0.0 mm High 34
17 Feb after 35.6 °C 38 % 30 km/h 0.0 mm High 28
18 Feb after 33.1 °C 46 % 41 km/h 0.0 mm High 36
19 Feb after 32.1 °C 49 % 47 km/h 0.0 mm High 36
20 Feb after 31.2 °C 55 % 46 km/h 2.4 mm Moderate 15

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 23 Jan 2026
After · 19 Feb 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 8 February 2026 the air beside the fire reached 20 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak20 µg/m³
Days over the guideline0 days
PM1022 µg/m³
Optical depth0.23
28 Jan31 Jan3 Feb6 Feb
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 132Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Mexico

Frequently asked questions

How long did the Santiago Niltepec fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 30 January 2026 to 12 February 2026 (14 days). The perimeter dates it from 30 January 2026 to 5 February 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 2,751 hectares (27.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Santiago Niltepec (2,768 ha, 5.0 %).
What was the weather like?
During the fire the temperature reached 34.5 °C, humidity dropped to 22 % and gusts hit 91 km/h. The fire danger index (FWI) reached 56, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Mexico (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 5 February 2026 → 12 February 2026.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 30 January 2026 to 5 February 2026. 132 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.