Skip to content
worldfires
BO · Bolivia · –

Santa Ana fire, 13 August 2024 Santa Ana, Exaltación

Out · last detection 21 Aug 2024, 17:34 UTC

The fire started on 13 August 2024 in Santa Ana, Bolivia, and satellites saw it burning for 9 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 8,875 hectares from heat detections, spread across 2 municipalities.

It is the 183th largest in Beni since 2016 (of 858 with a page). Number 93 in Bolivia in 2024, of 295.

Burnt area
8,875ha
GWIS perimeter (Copernicus)
Duration
9days
13 Aug 2024 – 21 Aug 2024
Municipalities hit
2
municipalities
Started on
13 Aug
2024
Heat detections
255
in a single hotspot: 112 MW
Danger at start
33
High · FWI index
Average daily power
775MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 13 Aug21 Aug
21 Aug 2024

How it evolved, day by day

13 Aug 2024 · 5 MW · 1 16 Aug 2024 · 1,806 MW · 50 17 Aug 2024 · 2,339 MW · 147 18 Aug 2024 · 868 MW · 32 19 Aug 2024 · 88 MW · 10 20 Aug 2024 · 21 MW · 6 21 Aug 2024 · 297 MW · 9
13 Aug 17 Aug 19 Aug 21 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

39°high
40km/h · peak gust
12%lowest humidity

It had gone 4 days without rain (1 mm or more) when it started.

This area had burned before

33% of the perimeter overlaps earlier fires recorded since 2016: 1,131 ha in 2016, 574 ha in 2018, 745 ha in 2019, 581 ha in 2020, 618 ha in 2022, 84 ha in 2023. Part of it burned more than once, so the yearly figures add up to more than the 2,918 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 5.6% of the area of London (89 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Santa Ana 18,088 inhabitants where it started
    8,570 ha
    0.4 %
  2. Exaltación 8,012 inhabitants
    324 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area0.16 ha
Residents< 20

Inside the perimeter there were about 0.16 hectares of built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
13 Aug 31.8 °C 12 % 34 km/h 0.0 mm High 33
14 Aug 34.4 °C 24 % 21 km/h 0.0 mm High 24
15 Aug 36.8 °C 28 % 38 km/h 0.0 mm High 34
16 Aug 37.7 °C 28 % 37 km/h 0.0 mm High 36
17 Aug 37.8 °C 33 % 37 km/h 0.0 mm High 35
18 Aug 38.9 °C 30 % 30 km/h 0.0 mm High 32
19 Aug 38.6 °C 33 % 31 km/h 0.0 mm High 34
20 Aug 38.8 °C 30 % 27 km/h 0.0 mm High 29
21 Aug 37.8 °C 37 % 40 km/h 0.2 mm Very high 41
22 Aug after 38.0 °C 35 % 47 km/h 0.0 mm Very high 42
23 Aug after 37.5 °C 39 % 37 km/h 0.2 mm High 37
24 Aug after 30.0 °C 50 % 42 km/h 0.0 mm High 32
25 Aug after 25.1 °C 30 % 52 km/h 0.9 mm Very high 39
26 Aug after 27.0 °C 20 % 40 km/h 0.0 mm High 38
27 Aug after 31.8 °C 24 % 16 km/h 0.0 mm High 30
28 Aug after 34.3 °C 29 % 22 km/h 0.0 mm High 27
29 Aug after 37.4 °C 30 % 24 km/h 0.0 mm High 32
30 Aug after 38.2 °C 27 % 23 km/h 0.0 mm High 27
31 Aug after 37.7 °C 32 % 28 km/h 0.0 mm High 33

Its twins: fires that started in the same weather

It started with an FWI of 32.9, a minimum humidity of 12% and 4 days without rain. Fires in the area that started in weather like this since 2016: 3.

FWI at the start 32.9
Minimum humidity 12 %
Days without rain 4
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Santa Ana fire, August 2016
3,809 ha 7 days FWI 28.4 Min. humidity 22 % 52 km away, in 2016

First rain (1 mm or more) after it ended: 20.3 mm on 29 Aug.

What happened to them

Fires in the area that started in similar weather: 3. With fewer than 15 we give no figures: they would be more noise than signal.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
40km/h · max. gust

It was considered over on 21 Aug, and not even 1 mm fell in the following ten days: it went out without rain.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 6 Aug 2024
After · 28 Aug 2024

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 18 August 2024 the air beside the fire reached 89 µg/m³ of PM2.5. That day averaged 65: 4.4 times the WHO daily guideline (15).

PM2.5 peak89 µg/m³
Days over the guideline9 days
PM10127 µg/m³
Optical depth1.57
14 Aug17 Aug20 Aug23 Aug
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 255Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Bolivia

Frequently asked questions

How long did the Santa Ana fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 13 August 2024 to 21 August 2024 (9 days). The perimeter dates it from 16 August 2024 to 21 August 2024.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 8,875 hectares (88.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Santa Ana (8,570 ha, 0.4 %); Exaltación (324 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 38.9 °C, humidity dropped to 12 % and gusts hit 40 km/h. The fire danger index (FWI) reached 41, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Bolivia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 119 · 110 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 16 August 2024 → 13 August 2024.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 119 · 110.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 16 August 2024 to 21 August 2024. 255 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.