Skip to content
worldfires
US · United States · –

Sand Creek Fire, August 2026 Beaverhead

Out · last detection 8 Aug 2026, 20:40 UTC

The fire started on 1 August 2026 in Beaverhead, United States, and satellites saw it burning for 8 days. United States agencies (MTBS / NIFC) mapped an official burnt perimeter of 14,375 hectares, spread across a single county.

It is the 15th largest in Montana since 2016 (of 302 with a page). Number 37 in United States in 2026, of 419.

Burnt area
14,375ha
official perimeter (MTBS / NIFC)
Duration
≈ 8days
1 Aug 2026 – 8 Aug 2026
Counties hit
1
counties
Started on
1 Aug
2026
Heat detections
789
in a single hotspot: 409 MW
Danger at start
39
Very high · FWI index
Average daily power
2.9GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 1 Aug8 Aug
8 Aug 2026

How it evolved, day by day

1 Aug 2026 · 1,352 MW · 22 2 Aug 2026 · 308 MW · 49 3 Aug 2026 · 56 MW · 11 4 Aug 2026 · 200 MW · 11 5 Aug 2026 · 3,824 MW · 54 6 Aug 2026 · 4,639 MW · 153 7 Aug 2026 · 5,519 MW · 213 8 Aug 2026 · 6,976 MW · 276
1 Aug 3 Aug 5 Aug 8 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (24 passes) and with what wind. Watch the film

The weather it burned in

28°high
54km/h · peak gust
15%lowest humidity

It had gone one day without rain (1 mm or more) when it started. Rain came after the fire: 1.0 mm on 12 Aug.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 9.1% of the area of London (144 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each county

  1. Beaverhead where it started
    15,526 ha reached on 1 Aug
    1.1 %

Burnt area inside each county, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area0.25 ha
Residents< 20

Inside the perimeter there were about 0.25 hectares of built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Strong wind: 27 % of the area in United States

Day High Min. humidity Peak gust Rain Danger (FWI)
1 Aug 28.5 °C 15 % 54 km/h 0.0 mm Very high 39
2 Aug 20.8 °C 28 % 49 km/h 0.0 mm High 36
3 Aug 16.7 °C 28 % 29 km/h 0.0 mm High 24
4 Aug 19.6 °C 19 % 42 km/h 0.0 mm High 23
5 Aug 22.7 °C 15 % 40 km/h 0.0 mm High 31
6 Aug 25.0 °C 16 % 48 km/h 0.0 mm Very high 39
7 Aug 25.9 °C 18 % 48 km/h 0.0 mm Very high 40
8 Aug 25.7 °C 18 % 50 km/h 0.0 mm Very high 40
9 Aug after 24.0 °C 20 % 44 km/h 0.0 mm High 36
10 Aug after 24.8 °C 19 % 48 km/h 0.0 mm Very high 41
11 Aug after 24.2 °C 18 % 49 km/h 0.0 mm Very high 40
12 Aug after 22.1 °C 25 % 44 km/h 1.0 mm High 38

Its twins: fires that started in the same weather

It started with an FWI of 39.0, a minimum humidity of 15% and 1 day without rain. Fires in the area that started in weather like this since 2016: 18.

FWI at the start 39.0
Minimum humidity 15 %
Days without rain 1
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

State Creek Fire, August 2020
1,839 ha 43 days FWI 39.9 Min. humidity 15 % 104 km away, in 2020

First rain (1 mm or more) after it ended: 1.3 mm on 11 Oct.

What happened to them

31 days
median duration
2,090 ha
median area
78 %
went past 1,000 ha
3.3 mm
rain at the end (median; 16 of 18 had it)

It was 6.9 times larger than the median of its twins and lasted 8 days, against 31 days.

Only 2 of its 18 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 2 of 18, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.3 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.0 mmfirst rain
12 Aug4 days after it ended
54km/h · max. gust

It was considered over on 8 Aug, and on 12 Aug 1.0 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 16 of 18, with a median of 3.3 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 25 Jul 2026
After · 15 Aug 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 8 August 2026 the air beside the fire reached 484 µg/m³ of PM2.5. That day averaged 230: 15 times the WHO daily guideline (15).

PM2.5 peak484 µg/m³
Days over the guideline12 days
PM10490 µg/m³
Optical depth1.90
30 Jul2 Aug5 Aug8 Aug11 Aug
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 789Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in United States

Frequently asked questions

How long did the Sand Creek Fire last?
The official perimeter only gives the start date (1 August 2026). The end comes from the heat detections inside the perimeter: it burned until 8 August 2026 (8 days from 1 August 2026), the last day with detections before more than 10 days in a row without any, so it is approximate.
How much area did it burn?
The official perimeter published by United States agencies (MTBS / NIFC) is 14,375 hectares (143.8 km²). Other tallies, such as daily incident reports, may give slightly different figures.
Which counties burned?
The fire only entered Beaverhead (15,526 ha, 1.1 %).
What was the weather like?
During the fire the temperature reached 28.5 °C, humidity dropped to 15 % and gusts hit 54 km/h. The fire danger index (FWI) reached 40, class Very high.
Where does this data come from?
From the official burnt perimeter of United States agencies (MTBS / NIFC, public domain), NASA FIRMS VIIRS hotspots and the administrative boundaries of United States. It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 18. Their median duration was 31 days and their median area 2,090 ha; 78 % went past 1,000 ha. Only 2 of its 18 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 2 of 18, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.3 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: NIFC WFIGS (United States), official.
  • The official perimeter has no end date: the end is the last day with VIIRS detections inside the perimeter before a gap of more than 10 days (150 days at most), so it is approximate. 789 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter is official and in the public domain. For past years it comes from MTBS (Monitoring Trends in Burn Severity), run by the U.S. Geological Survey and the USDA Forest Service, which map it on Landsat and Sentinel-2 imagery. For the current and last year it comes from WFIGS at the National Interagency Fire Center (NIFC): incident perimeters mapped by fire crews, aircraft and imagery. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. County boundaries come from geoBoundaries ADM2 (Public Domain). The area per county is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from official figures.