Skip to content
worldfires
EC · Ecuador · –

San Vicente fire, 1 December 2025 San Vicente, Chone

Out · last detection 15 Dec 2025, 19:04 UTC

The fire started on 1 December 2025 in San Vicente, Ecuador, and satellites saw it burning for 14 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,662 hectares from heat detections, spread across 2 municipalities.

Number 4 in Ecuador in 2025, of 36.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
3,662ha
GWIS perimeter (Copernicus)
Duration
14days
1 Dec 2025 – 14 Dec 2025
Municipalities hit
2
cantons
Started on
1 Dec
2025
Heat detections
74
in a single hotspot: 0 MW
Danger at start
11
Moderate · FWI index
Average daily power
105MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 1 Dec14 Dec
15 Dec 2025

How it evolved, day by day

3 Dec 2025 · 33 MW · 5 8 Dec 2025 · 30 MW · 3 9 Dec 2025 · 184 MW · 17 10 Dec 2025 · 130 MW · 17 11 Dec 2025 · 270 MW · 16 12 Dec 2025 · 224 MW · 10 13 Dec 2025 · 29 MW · 3 14 Dec 2025 · 3 MW · 1 15 Dec 2025 · 43 MW · 2
3 Dec 9 Dec 11 Dec 13 Dec 15 Dec

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

33°high
42km/h · peak gust
40%lowest humidity

It had gone 5 days without rain (1 mm or more) when it started. Rain came after the fire: 1.9 mm on 19 Dec.

This area had burned before

7% of the perimeter overlaps earlier fires recorded since 2016: 260 ha in 2022.

How big is it?

10 km
It burned the equivalent of 2.3% of the area of London (37 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. San Vicente where it started
    3,200 ha
    4.5 %
  2. 486 ha
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area0.27 ha
Residents≈ 20

Inside the perimeter there were about 0.27 hectares of built-up land and about 20 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
1 Dec 29.1 °C 56 % 34 km/h 0.2 mm Low 11
2 Dec 30.7 °C 49 % 30 km/h 0.0 mm Moderate 13
3 Dec 28.8 °C 59 % 27 km/h 0.6 mm Low 10
4 Dec 28.9 °C 59 % 35 km/h 0.7 mm Low 10
5 Dec 30.9 °C 47 % 36 km/h 0.0 mm Moderate 15
6 Dec 32.7 °C 41 % 39 km/h 0.0 mm Moderate 19
7 Dec 31.4 °C 45 % 38 km/h 0.0 mm Moderate 20
8 Dec 31.6 °C 44 % 38 km/h 0.0 mm Moderate 20
9 Dec 29.6 °C 49 % 42 km/h 0.0 mm Moderate 21
10 Dec 32.3 °C 40 % 40 km/h 0.0 mm Moderate 21
11 Dec 31.4 °C 44 % 41 km/h 0.0 mm High 22
12 Dec 31.4 °C 46 % 41 km/h 0.0 mm High 23
13 Dec 30.4 °C 45 % 40 km/h 0.0 mm High 23
14 Dec 29.9 °C 50 % 40 km/h 0.0 mm High 22
15 Dec after 28.9 °C 47 % 40 km/h 0.0 mm High 23
16 Dec after 30.0 °C 49 % 37 km/h 0.0 mm High 22
17 Dec after 27.9 °C 56 % 28 km/h 0.3 mm Moderate 18
18 Dec after 31.0 °C 49 % 33 km/h 0.0 mm Moderate 19
19 Dec after 28.6 °C 59 % 31 km/h 1.9 mm Low 7

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 24 Nov 2025
After · 21 Dec 2025

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 6 December 2025 the air beside the fire reached 24 µg/m³ of PM2.5. That day averaged 17: 1.2 times the WHO daily guideline (15).

PM2.5 peak24 µg/m³
Days over the guideline2 days
PM1028 µg/m³
Optical depth0.69
29 Nov3 Dec7 Dec11 Dec15 Dec
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 0Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Ecuador

Frequently asked questions

How long did the San Vicente fire last?
GWIS (Copernicus) dates it between 1 December 2025 and 14 December 2025: 14 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,662 hectares (36.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: San Vicente (3,200 ha, 4.5 %); Chone (486 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 32.7 °C, humidity dropped to 40 % and gusts hit 42 km/h. The fire danger index (FWI) reached 23, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Ecuador (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings

Satellite cross-check

History of this page · 4 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 20 December 2025 → 14 December 2025.
  2. Start date: 25 November 2025 → 1 December 2025.
  3. Last day with fire: 14 December 2025 → 20 December 2025.
  4. Start date: 1 December 2025 → 25 November 2025.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. No Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.