Skip to content
worldfires
AR · Argentina · –

San Miguel fire, March 2025 San Miguel

Out · last detection

The fire started on in San Miguel, Argentina, and satellites saw it burning for 10 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 2,355 hectares from heat detections, spread across a single municipality.

It is number 103 by size of the 198 fires with a page that started in Corrientes since 2016. Number 51 in Argentina in 2025, of 133.

Burnt area
2,355ha
GWIS perimeter (Copernicus)
Duration
10days
15 Mar 2025 – 24 Mar 2025
Municipalities hit
1
departments
Started on
15 Mar
2025
Heat detections
134
in a single hotspot: 282 MW
Danger at start
26
High · FWI index
Average daily power
523MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 15 Mar24 Mar
24 Mar 2025

How it evolved, day by day

15 Mar 2025 · 4 MW · 2 16 Mar 2025 · 145 MW · 21 19 Mar 2025 · 2,753 MW · 90 20 Mar 2025 · 62 MW · 7 21 Mar 2025 · 2 MW · 1 24 Mar 2025 · 172 MW · 13
15 Mar 19 Mar 21 Mar

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

35°high
49km/h · peak gust
19%lowest humidity

It had gone 5 days without rain (1 mm or more) when it started. Rain came after the fire: 12.9 mm on 25 Mar.

This area had burned before

62% of the perimeter overlaps earlier fires recorded since 2016: 113 ha in 2018, 656 ha in 2020, 324 ha in 2022, 8 ha in 2023, 796 ha in 2024. Part of it burned more than once, so the yearly figures add up to more than the 1,464 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 1.5% of the area of London (24 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. San Miguel where it started
    2,357 ha reached on 15 Mar
    0.8 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
15 Mar 30.6 °C 31 % 32 km/h 0.0 mm High 26
16 Mar 33.4 °C 24 % 28 km/h 0.0 mm High 29
17 Mar 30.0 °C 43 % 24 km/h 0.1 mm High 26
18 Mar 34.2 °C 32 % 32 km/h 0.0 mm High 26
19 Mar 33.8 °C 23 % 31 km/h 0.0 mm High 35
20 Mar 34.7 °C 19 % 29 km/h 0.0 mm High 33
21 Mar 35.4 °C 28 % 31 km/h 0.0 mm Very high 39
22 Mar 28.2 °C 60 % 49 km/h 21.7 mm Very low 2
23 Mar 33.8 °C 36 % 20 km/h 0.0 mm Very low 4
24 Mar 33.2 °C 49 % 25 km/h 4.3 mm Very low 4
25 Mar after 25.1 °C 78 % 30 km/h 12.9 mm Very low 5

Its twins: fires that started in the same weather

It started with an FWI of 26.2, a minimum humidity of 31% and 5 days without rain. Fires in the area that started in weather like this since 2016: 29.

FWI at the start 26.2
Minimum humidity 31 %
Days without rain 5
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Caapucu fire, January 2023
1,621 ha 7 days FWI 25.3 Min. humidity 31 % 118 km away, in 2023

First rain (1 mm or more) after it ended: 13.8 mm on 13 Jan.

What happened to them

7 days
median duration
2,324 ha
median area
100 %
went past 1,000 ha
9.2 mm
rain at the end (median; 28 of 29 had it)

It burned an area similar to its twins (2,355 ha against a median of 2,324 ha) and lasted 10 days, against 7 days.

In 1 of 29, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 9.2 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

12.9 mmfirst rain
25 Marthe day after it ended
49km/h · max. gust

It was considered over on 24 Mar, and on 25 Mar 12.9 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 28 of 29, with a median of 9.2 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 8 Mar 2025
After · 31 Mar 2025

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 25 March 2025 the air beside the fire reached 40 µg/m³ of PM2.5. That day averaged 19: 1.3 times the WHO daily guideline (15).

PM2.5 peak40 µg/m³
Days over the guideline2 days
PM1040 µg/m³
Optical depth0.61
13 Mar16 Mar19 Mar22 Mar25 Mar
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 134Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Argentina

Frequently asked questions

How long did the San Miguel fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 15 March 2025 to 24 March 2025 (10 days). The perimeter dates it from 16 March 2025 to 21 March 2025.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 2,355 hectares (23.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered San Miguel (2,357 ha, 0.8 %).
What was the weather like?
During the fire the temperature reached 35.4 °C, humidity dropped to 19 % and gusts hit 49 km/h. The fire danger index (FWI) reached 39, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Argentina (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 29. Their median duration was 7 days and their median area 2,324 ha; 100 % went past 1,000 ha. In 1 of 29, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 9.2 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · 100 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 21 March 2025 → 24 March 2025.
  2. Start date: 16 March 2025 → 15 March 2025.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911 · 100.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 16 March 2025 to 21 March 2025. 134 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.