Skip to content
worldfires
BO · Bolivia · –

San Miguel fire, 30 August 2024 San Miguel, San Ignacio

Out · last detection 11 Sept 2024, 17:39 UTC

The fire started on 30 August 2024 in San Miguel, Bolivia, and satellites saw it burning for 13 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 4,477 hectares from heat detections, spread across 2 municipalities.

It is the 479th largest in Santa Cruz since 2016 (of 785 with a page). Number 188 in Bolivia in 2024, of 295.

Compare with…

Suggestions: San Ignacio · 2017San Ignacio · 2020

Burnt area
4,477ha
GWIS perimeter (Copernicus)
Duration
13days
30 Aug 2024 – 11 Sept 2024
Municipalities hit
2
municipalities
Started on
30 Aug
2024
Heat detections
270
in a single hotspot: 263 MW
Danger at start
37
High · FWI index
Average daily power
195MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 30 Aug11 Sept
11 Sept 2024

How it evolved, day by day

30 Aug 2024 · 22 MW · 4 31 Aug 2024 · 532 MW · 13 1 Sept 2024 · 9 MW · 4 2 Sept 2024 · 168 MW · 8 3 Sept 2024 · 112 MW · 27 4 Sept 2024 · 51 MW · 26 5 Sept 2024 · 106 MW · 30 6 Sept 2024 · 74 MW · 15 7 Sept 2024 · 646 MW · 24 8 Sept 2024 · 557 MW · 53 9 Sept 2024 · 169 MW · 51 10 Sept 2024 · 14 MW · 7 11 Sept 2024 · 81 MW · 8
30 Aug 2 Sept 7 Sept 11 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

37°high
58km/h · peak gust
18%lowest humidity

It had gone 20 days without rain (1 mm or more) when it started.

This area had burned before

63% of the perimeter overlaps earlier fires recorded since 2016: 1,872 ha in 2018, 1,172 ha in 2020, 113 ha in 2021, 452 ha in 2022, 784 ha in 2023. Part of it burned more than once, so the yearly figures add up to more than the 2,810 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 2.8% of the area of London (45 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. San Miguel 15,329 inhabitants where it started
    4,442 ha
    0.5 %
  2. San Ignacio 56,702 inhabitants
    54 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area1.2 ha
Residents≈ 200

Inside the perimeter there were about 1.2 hectares of built-up land and about 200 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
30 Aug 34.4 °C 28 % 36 km/h 0.0 mm High 37
31 Aug 33.0 °C 29 % 30 km/h 0.0 mm High 35
1 Sept 27.3 °C 34 % 44 km/h 0.0 mm Very high 40
2 Sept 34.3 °C 25 % 31 km/h 0.0 mm High 34
3 Sept 35.1 °C 26 % 48 km/h 0.0 mm Very high 50
4 Sept 34.1 °C 31 % 42 km/h 0.0 mm Very high 42
5 Sept 27.5 °C 34 % 53 km/h 0.0 mm Very high 47
6 Sept 32.4 °C 28 % 32 km/h 0.0 mm High 34
7 Sept 35.2 °C 18 % 45 km/h 0.0 mm Extreme 58
8 Sept 36.6 °C 20 % 36 km/h 0.0 mm Very high 50
9 Sept 37.2 °C 23 % 37 km/h 0.0 mm Very high 48
10 Sept 36.6 °C 25 % 38 km/h 0.0 mm Extreme 50
11 Sept 35.3 °C 31 % 58 km/h 0.0 mm Extreme 68
12 Sept after 31.4 °C 43 % 41 km/h 0.1 mm High 33
13 Sept after 35.1 °C 35 % 49 km/h 0.0 mm Very high 42
14 Sept after 26.3 °C 66 % 48 km/h 0.0 mm High 29
15 Sept after 24.4 °C 48 % 35 km/h 0.5 mm High 24
16 Sept after 27.7 °C 41 % 34 km/h 0.0 mm High 28
17 Sept after 33.2 °C 38 % 33 km/h 0.0 mm High 26
18 Sept after 35.0 °C 33 % 40 km/h 0.3 mm High 36
19 Sept after 36.0 °C 31 % 57 km/h 0.1 mm Extreme 54
20 Sept after 37.5 °C 30 % 54 km/h 0.1 mm Extreme 50
21 Sept after 36.2 °C 29 % 41 km/h 0.0 mm Very high 45

Its twins: fires that started in the same weather

It started with an FWI of 36.6, a minimum humidity of 28% and 20 days without rain. Fires in the area that started in weather like this since 2016: 28.

FWI at the start 36.6
Minimum humidity 28 %
Days without rain 20
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

San Ignacio fire, September 2017
3,493 ha 8 days FWI 38.7 Min. humidity 29 % 42 km away, in 2017

First rain (1 mm or more) after it ended: 3.7 mm on 15 Sept.

What happened to them

16 days
median duration
5,000 ha
median area
25 %
went past 10,000 ha
4.1 mm
rain at the end (median; 21 of 28 had it)

It burned an area similar to its twins (4,477 ha against a median of 5,000 ha) and lasted 13 days, against 16 days.

In 7 of 28, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.1 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
58km/h · max. gust

It was considered over on 11 Sept, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 21 of 28, with a median of 4.1 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 23 Aug 2024
After · 18 Sept 2024

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 9 September 2024 the air beside the fire reached 909 µg/m³ of PM2.5. That day averaged 609: 41 times the WHO daily guideline (15).

PM2.5 peak909 µg/m³
Days over the guideline18 days
PM101,300 µg/m³
Optical depth9.19
28 Aug1 Sept5 Sept9 Sept13 Sept
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 270Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Frequently asked questions

How long did the San Miguel fire last?
GWIS (Copernicus) dates it between 30 August 2024 and 11 September 2024: 13 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 4,477 hectares (44.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: San Miguel (4,442 ha, 0.5 %); San Ignacio (54 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 37.2 °C, humidity dropped to 18 % and gusts hit 58 km/h. The fire danger index (FWI) reached 68, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Bolivia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 28. Their median duration was 16 days and their median area 5,000 ha; 25 % went past 10,000 ha. In 7 of 28, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.1 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 119 · 110 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 119 · 110.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 270 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.