Skip to content
worldfires
BO · Bolivia · –

San Matías fire, 19 June 2024 San Matías, San Ignacio

Out · last detection 2 Jul 2024, 05:38 UTC

The fire started on 19 June 2024 in San Matías, Bolivia, and satellites saw it burning for 14 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,097 hectares from heat detections, spread across 2 municipalities.

It is the 760th largest in Santa Cruz since 2016 (of 785 with a page). Number 283 in Bolivia in 2024, of 295.

Burnt area
3,097ha
GWIS perimeter (Copernicus)
Duration
14days
19 Jun 2024 – 2 Jul 2024
Municipalities hit
2
municipalities
Started on
19 Jun
2024
Heat detections
269
in a single hotspot: 91 MW
Danger at start
45
Very high · FWI index
Average daily power
209MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 19 Jun2 Jul
2 Jul 2024

How it evolved, day by day

19 Jun 2024 · 20 MW · 4 20 Jun 2024 · 31 MW · 8 21 Jun 2024 · 51 MW · 10 22 Jun 2024 · 5 MW · 3 24 Jun 2024 · 208 MW · 24 25 Jun 2024 · 91 MW · 17 26 Jun 2024 · 85 MW · 15 27 Jun 2024 · 726 MW · 29 28 Jun 2024 · 692 MW · 73 29 Jun 2024 · 755 MW · 74 30 Jun 2024 · 39 MW · 4 1 Jul 2024 · 9 MW · 6 2 Jul 2024 · 7 MW · 2
19 Jun 22 Jun 26 Jun 29 Jun 2 Jul

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
53km/h · peak gust
28%lowest humidity

It had gone 24 days without rain (1 mm or more) when it started.

This area had burned before

98% of the perimeter overlaps earlier fires recorded since 2016: 336 ha in 2017, 312 ha in 2018, 3,402 ha in 2019, 458 ha in 2021. Part of it burned more than once, so the yearly figures add up to more than the 3,028 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 2% of the area of London (31 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. San Matías 13,073 inhabitants where it started
    3,049 ha
    0.1 %
  2. San Ignacio 56,702 inhabitants
    53 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
19 Jun 36.0 °C 34 % 40 km/h 0.0 mm Very high 45
20 Jun 36.0 °C 33 % 20 km/h 0.0 mm High 32
21 Jun 35.2 °C 28 % 37 km/h 0.0 mm Very high 48
22 Jun 34.9 °C 32 % 53 km/h 0.0 mm Extreme 61
23 Jun 34.6 °C 34 % 46 km/h 0.0 mm Extreme 54
24 Jun 35.5 °C 36 % 33 km/h 0.0 mm Very high 39
25 Jun 31.6 °C 43 % 19 km/h 0.0 mm High 25
26 Jun 27.9 °C 50 % 26 km/h 0.0 mm High 25
27 Jun 29.8 °C 44 % 25 km/h 0.0 mm High 25
28 Jun 34.3 °C 32 % 42 km/h 0.0 mm Very high 46
29 Jun 26.5 °C 47 % 36 km/h 0.0 mm Very high 39
30 Jun 20.2 °C 38 % 26 km/h 0.0 mm High 32
1 Jul 28.7 °C 36 % 22 km/h 0.0 mm High 30
2 Jul 34.3 °C 31 % 23 km/h 0.0 mm High 32
3 Jul after 36.2 °C 22 % 27 km/h 0.0 mm Very high 44
4 Jul after 36.5 °C 22 % 34 km/h 0.0 mm Very high 44
5 Jul after 35.6 °C 30 % 16 km/h 0.0 mm Very high 40
6 Jul after 27.7 °C 37 % 25 km/h 0.0 mm High 34
7 Jul after 29.4 °C 39 % 31 km/h 0.0 mm High 33
8 Jul after 20.6 °C 47 % 29 km/h 0.0 mm High 32
9 Jul after 20.0 °C 49 % 24 km/h 0.0 mm High 24
10 Jul after 22.4 °C 47 % 22 km/h 0.0 mm High 22
11 Jul after 29.8 °C 39 % 34 km/h 0.0 mm High 22
12 Jul after 19.8 °C 50 % 36 km/h 0.0 mm High 30

Its twins: fires that started in the same weather

It started with an FWI of 45.1, a minimum humidity of 34% and 24 days without rain. Fires in the area that started in weather like this since 2016: 16.

FWI at the start 45.1
Minimum humidity 34 %
Days without rain 24
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

San Matías fire, August 2019
13,264 ha 23 days FWI 44.7 Min. humidity 37 % 16 km away, in 2019

First rain (1 mm or more) after it ended: 4.6 mm on 26 Aug.

What happened to them

12 days
median duration
5,844 ha
median area
38 %
went past 10,000 ha
3.0 mm
rain at the end (median; 13 of 16 had it)

It stayed below its twins: 3,097 ha against a median of 5,844 ha. It lasted 14 days, against 12 days.

In 3 of 16, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.0 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
53km/h · max. gust

It was considered over on 2 Jul, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 13 of 16, with a median of 3.0 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 12 Jun 2024
After · 9 Jul 2024

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 1 July 2024 the air beside the fire reached 57 µg/m³ of PM2.5. That day averaged 31: 2.1 times the WHO daily guideline (15).

PM2.5 peak57 µg/m³
Days over the guideline6 days
PM1082 µg/m³
Optical depth0.45
17 Jun21 Jun25 Jun29 Jun3 Jul
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 269Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Bolivia

Frequently asked questions

How long did the San Matías fire last?
GWIS (Copernicus) dates it between 19 June 2024 and 2 July 2024: 14 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,097 hectares (31.0 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: San Matías (3,049 ha, 0.1 %); San Ignacio (53 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 36.0 °C, humidity dropped to 28 % and gusts hit 53 km/h. The fire danger index (FWI) reached 61, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Bolivia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 16. Their median duration was 12 days and their median area 5,844 ha; 38 % went past 10,000 ha. In 3 of 16, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.0 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 119 · 110 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 119 · 110.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 269 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.