Skip to content
worldfires
AR · Argentina · –

San Martín fire, December 2022 San Martín

Out · last detection

The fire started on in San Martín, Argentina, and satellites saw it burning for 4 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,551 hectares from heat detections, spread across a single municipality.

It is number 190 by size of the 198 fires with a page that started in Corrientes since 2016. Number 412 in Argentina in 2022, of 441.

The power measured by the satellite is low (18.8 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
1,551ha
GWIS perimeter (Copernicus)
Duration
4days
12 Dec 2022 – 15 Dec 2022
Municipalities hit
1
departments
Started on
12 Dec
2022
Heat detections
61
in a single hotspot: 19 MW
Danger at start
12
Moderate · FWI index
Average daily power
93MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 12 Dec15 Dec
15 Dec 2022

How it evolved, day by day

13 Dec 2022 · 78 MW · 9 14 Dec 2022 · 201 MW · 51 15 Dec 2022 · 1 MW · 1
13 Dec 14 Dec 15 Dec

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
48km/h · peak gust
21%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 1.0 mm on 24 Dec.

This area had burned before

31% of the perimeter overlaps earlier fires recorded since 2016: 485 ha in 2020.

How big is it?

10 km
It burned the equivalent of 1% of the area of London (16 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. San Martín where it started
    1,555 ha reached on 13 Dec
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
12 Dec 35.6 °C 38 % 48 km/h 2.8 mm Moderate 12
13 Dec 31.7 °C 21 % 46 km/h 0.0 mm High 23
14 Dec 32.8 °C 23 % 31 km/h 0.0 mm High 28
15 Dec 34.0 °C 23 % 36 km/h 0.0 mm High 29
16 Dec after 31.5 °C 16 % 42 km/h 0.0 mm Very high 40
17 Dec after 29.9 °C 28 % 45 km/h 0.0 mm High 35
18 Dec after 32.4 °C 30 % 34 km/h 0.0 mm High 26
19 Dec after 32.9 °C 35 % 31 km/h 0.1 mm High 25
20 Dec after 34.5 °C 26 % 30 km/h 0.0 mm High 29
21 Dec after 35.2 °C 29 % 34 km/h 0.0 mm High 30
22 Dec after 36.5 °C 29 % 35 km/h 0.0 mm High 32
23 Dec after 36.2 °C 31 % 44 km/h 0.0 mm Very high 47
24 Dec after 34.6 °C 36 % 38 km/h 1.0 mm High 35

Its twins: fires that started in the same weather

It started with an FWI of 11.8, a minimum humidity of 38% and rain the day before. Fires in the area that started in weather like this since 2016: 27.

FWI at the start 11.8
Minimum humidity 38 %
Days without rain 0
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

San Martín fire, April 2020
1,670 ha 2 days FWI 13.0 Min. humidity 39 % 16 km away, in 2020

First rain (1 mm or more) after it ended: 1.3 mm on 1 May.

What happened to them

6 days
median duration
1,822 ha
median area
100 %
went past 1,000 ha
4.2 mm
rain at the end (median; 27 of 27 had it)

It burned an area similar to its twins (1,551 ha against a median of 1,822 ha) and lasted 4 days, against 6 days.

All of them had rain in the ten days after the end: the first rainy day brought a median of 4.2 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.0 mmfirst rain
24 Dec9 days after it ended
48km/h · max. gust

It was considered over on 15 Dec, and on 24 Dec 1.0 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 27 of 27, with a median of 4.2 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 5 Dec 2022
After · 22 Dec 2022

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 10 December 2022 the air beside the fire reached 10 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak10 µg/m³
Days over the guideline0 days
PM1014 µg/m³
Optical depth0.39
10 Dec12 Dec14 Dec16 Dec
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 61Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Argentina

Frequently asked questions

How long did the San Martín fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 12 December 2022 to 15 December 2022 (4 days). The perimeter dates it from 12 December 2022 to 14 December 2022.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,551 hectares (15.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered San Martín (1,555 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 35.6 °C, humidity dropped to 21 % and gusts hit 48 km/h. The fire danger index (FWI) reached 29, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Argentina (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 27. Their median duration was 6 days and their median area 1,822 ha; 100 % went past 1,000 ha. All of them had rain in the ten days after the end: the first rainy day brought a median of 4.2 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · 100 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 14 December 2022 → 15 December 2022.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911 · 100.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 12 December 2022 to 14 December 2022. 61 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.