Skip to content
worldfires
IT · Italy · –

San Lorenzo fire, August 2026 San Lorenzo

Out · last detection 1 Sept 2026, 13:01 UTC

The fire started on 31 August 2026 in San Lorenzo, Italy, and satellites saw it burning for 2 days. Copernicus mapped a burnt perimeter of 136 hectares from satellite imagery, spread across a single municipality.

It is the 68th largest in Reggio di Calabria since 2016 (of 101 with a page). Number 164 in Italy in 2026, of 232.

The power measured by the satellite is low (29.3 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
136ha
Copernicus perimeter
Duration
≈ 2days
31 Aug 2026 – 1 Sept 2026
Municipalities hit
1
municipalities
Started on
31 Aug
2026
Heat detections
12
in a single hotspot: 29 MW
Danger at start
34
High · FWI index
Average daily power
64MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 31 Aug1 Sept
1 Sept 2026

How it evolved, day by day

31 Aug 2026 · 35 MW · 2 1 Sept 2026 · 92 MW · 10
31 Aug 1 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

28°high
41km/h · peak gust
42%lowest humidity

It had gone 14 days without rain (1 mm or more) when it started.

This area had burned before

100% of the perimeter overlaps earlier fires recorded since 2016: 39 ha in 2019, 136 ha in 2021. Part of it burned more than once, so the yearly figures add up to more than the 136 ha that had burned before.

What happened to each town

  1. San Lorenzo 952 inhabitants · 5.3 km from the centre where it started
    136 ha reached on 31 Aug
    2.1 %

Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Mixed forest60 %
  • Agricultural areas35 %
  • Broadleaved forest5.2 %

Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
31 Aug 27.5 °C 42 % 41 km/h 0.0 mm High 34
1 Sept 27.2 °C 48 % 38 km/h 0.0 mm High 26
2 Sept after 26.7 °C 54 % 32 km/h 0.0 mm Moderate 21
3 Sept after 26.1 °C 46 % 35 km/h 0.0 mm High 22
4 Sept after 26.1 °C 46 % 30 km/h 0.0 mm High 23
5 Sept after 26.4 °C 40 % 27 km/h 0.0 mm High 22
6 Sept after 27.8 °C 41 % 30 km/h 0.0 mm High 23
7 Sept after 26.6 °C 40 % 23 km/h 0.0 mm High 27
8 Sept after 25.7 °C 49 % 26 km/h 0.0 mm High 24
9 Sept after 25.2 °C 49 % 25 km/h 0.1 mm High 22
10 Sept after 25.8 °C 47 % 31 km/h 0.0 mm High 27
11 Sept after 26.3 °C 47 % 31 km/h 0.0 mm High 26

Its twins: fires that started in the same weather

It started with an FWI of 34.1, a minimum humidity of 42% and 14 days without rain. Fires in the area that started in weather like this since 2016: 23.

FWI at the start 34.1
Minimum humidity 42 %
Days without rain 14
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Barcellona Pozzo di Gotto fire, September 2023
407 ha 2 days FWI 33.8 Min. humidity 42 % 54 km away, in 2023

First rain (1 mm or more) after it ended: 1.2 mm on 24 Sept.

What happened to them

2 days
median duration
180 ha
median area
4 %
went past 1,000 ha
3.2 mm
rain at the end (median; 16 of 23 had it)

It burned an area similar to its twins (136 ha against a median of 180 ha) and lasted 2 days, against 2 days.

In 7 of 23, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.2 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
41km/h · max. gust

It was considered over on 1 Sept, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 16 of 23, with a median of 3.2 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 24 Aug 2026
After · 8 Sept 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 30 August 2026 the air beside the fire reached 28 µg/m³ of PM2.5. That day averaged 22: 1.5 times the WHO daily guideline (15).

PM2.5 peak28 µg/m³
Days over the guideline2 days
PM1071 µg/m³
Optical depth0.75
29 Aug31 Aug2 Sept
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 12Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Italy

Frequently asked questions

How long did the San Lorenzo fire last?
The official perimeter only gives the start date (31 August 2026). The end comes from the heat detections inside the perimeter: it burned until 1 September 2026 (2 days from 31 August 2026), the last day with detections before more than 10 days in a row without any, so it is approximate.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 136 hectares (1.4 km²). Official national figures may differ.
Which municipalities burned?
The fire only entered San Lorenzo (136 ha, 2.1 %).
Did the fire reach a town?
The fire started in San Lorenzo and came within 5.3 km of its centre. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
What was the weather like?
During the fire the temperature reached 27.5 °C, humidity dropped to 42 % and gusts hit 41 km/h. The fire danger index (FWI) reached 34, class High.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Italy (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 23. Their median duration was 2 days and their median area 180 ha; 4 % went past 1,000 ha. In 7 of 23, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.2 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · 1515 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112 · 1515.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
  • The official perimeter has no end date: the end is the last day with VIIRS detections inside the perimeter before a gap of more than 10 days (150 days at most), so it is approximate. 12 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM4 (Creative Commons Attribution 3.0 License). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.