Skip to content
worldfires
BO · Bolivia · –

San Julián fire, 29 August 2019 San Julián

Out · last detection 6 Sept 2019, 18:29 UTC

The fire started on 29 August 2019 in San Julián, Bolivia, and satellites saw it burning for 9 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,008 hectares from heat detections, spread across a single municipality.

It is the 784th largest in Santa Cruz since 2016 (of 785 with a page). Number 218 in Bolivia in 2019, of 218.

Burnt area
3,008ha
GWIS perimeter (Copernicus)
Duration
9days
29 Aug 2019 – 6 Sept 2019
Municipalities hit
1
municipalities
Started on
29 Aug
2019
Heat detections
83
in a single hotspot: 119 MW
Danger at start
28
High · FWI index
Average daily power
127MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 29 Aug6 Sept
6 Sept 2019

How it evolved, day by day

29 Aug 2019 · 2 MW · 1 31 Aug 2019 · 48 MW · 6 1 Sept 2019 · 6 MW · 1 2 Sept 2019 · 458 MW · 27 3 Sept 2019 · 344 MW · 41 5 Sept 2019 · 9 MW · 2 6 Sept 2019 · 20 MW · 5
29 Aug 2 Sept 6 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
50km/h · peak gust
29%lowest humidity

It had gone one day without rain (1 mm or more) when it started. Rain came after the fire: 3.0 mm on 8 Sept.

This area had burned before

98% of the perimeter overlaps earlier fires recorded since 2016: 3,851 ha in 2016, 198 ha in 2018. Part of it burned more than once, so the yearly figures add up to more than the 2,940 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 1.9% of the area of London (30 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. San Julián 44,909 inhabitants where it started
    3,021 ha
    0.6 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
29 Aug 35.2 °C 38 % 45 km/h 0.0 mm High 28
30 Aug 35.9 °C 40 % 50 km/h 0.0 mm High 34
31 Aug 32.6 °C 39 % 41 km/h 1.7 mm High 25
1 Sept 26.0 °C 33 % 45 km/h 0.3 mm Moderate 21
2 Sept 32.7 °C 36 % 34 km/h 0.0 mm Moderate 18
3 Sept 33.0 °C 34 % 43 km/h 0.0 mm High 32
4 Sept 32.4 °C 29 % 41 km/h 0.0 mm Very high 39
5 Sept 30.9 °C 30 % 45 km/h 0.0 mm Very high 40
6 Sept 36.3 °C 33 % 42 km/h 0.0 mm High 34
7 Sept after 37.0 °C 33 % 56 km/h 0.4 mm Very high 44
8 Sept after 35.6 °C 39 % 55 km/h 3.0 mm Very high 40

Its twins: fires that started in the same weather

It started with an FWI of 28.4, a minimum humidity of 38% and 1 day without rain. Fires in the area that started in weather like this since 2016: 26.

FWI at the start 28.4
Minimum humidity 38 %
Days without rain 1
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Concepción fire, September 2020
3,322 ha 4 days FWI 28.0 Min. humidity 38 % 100 km away, in 2020

First rain (1 mm or more) after it ended: 1.7 mm on 12 Oct.

What happened to them

13 days
median duration
4,694 ha
median area
4 %
went past 10,000 ha
5.5 mm
rain at the end (median; 25 of 26 had it)

It stayed below its twins: 3,008 ha against a median of 4,694 ha. It lasted 9 days, against 13 days.

In 1 of 26, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 5.5 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

3.0 mmfirst rain
8 Sept2 days after it ended
50km/h · max. gust

It was considered over on 6 Sept, and on 8 Sept 3.0 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 25 of 26, with a median of 5.5 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 22 Aug 2019
After · 13 Sept 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 83Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Bolivia

Frequently asked questions

How long did the San Julián fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 29 August 2019 to 6 September 2019 (9 days). The perimeter dates it from 31 August 2019 to 6 September 2019.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,008 hectares (30.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered San Julián (3,021 ha, 0.6 %).
What was the weather like?
During the fire the temperature reached 36.3 °C, humidity dropped to 29 % and gusts hit 50 km/h. The fire danger index (FWI) reached 40, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Bolivia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 26. Their median duration was 13 days and their median area 4,694 ha; 4 % went past 10,000 ha. In 1 of 26, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 5.5 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 119 · 110 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 31 August 2019 → 29 August 2019.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 119 · 110.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 31 August 2019 to 6 September 2019. 83 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.