Skip to content
worldfires
BO · Bolivia · –

San Javier fire, August 2024 San Javier, Huacaraje

Out · last detection 10 Sept 2024, 17:58 UTC

The fire started on 29 August 2024 in San Javier, Bolivia, and satellites saw it burning for 13 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 6,186 hectares from heat detections, spread across 2 municipalities.

It is the 316th largest in Beni since 2016 (of 858 with a page). Number 133 in Bolivia in 2024, of 295.

Burnt area
6,186ha
GWIS perimeter (Copernicus)
Duration
13days
29 Aug 2024 – 10 Sept 2024
Municipalities hit
2
municipalities
Started on
29 Aug
2024
Heat detections
273
in a single hotspot: 47 MW
Danger at start
26
High · FWI index
Average daily power
209MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 29 Aug10 Sept
10 Sept 2024

How it evolved, day by day

29 Aug 2024 · 12 MW · 2 30 Aug 2024 · 70 MW · 12 31 Aug 2024 · 301 MW · 24 1 Sept 2024 · 455 MW · 53 2 Sept 2024 · 111 MW · 23 3 Sept 2024 · 261 MW · 32 4 Sept 2024 · 946 MW · 73 5 Sept 2024 · 243 MW · 32 6 Sept 2024 · 35 MW · 9 8 Sept 2024 · 19 MW · 3 9 Sept 2024 · 31 MW · 3 10 Sept 2024 · 24 MW · 7
29 Aug 1 Sept 4 Sept 8 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

37°high
43km/h · peak gust
30%lowest humidity

It had gone 19 days without rain (1 mm or more) when it started. Rain came after the fire: 1.5 mm on 12 Sept.

This area had burned before

75% of the perimeter overlaps earlier fires recorded since 2016: 1,865 ha in 2016, 1,083 ha in 2017, 1,089 ha in 2018, 4,497 ha in 2021, 848 ha in 2022. Part of it burned more than once, so the yearly figures add up to more than the 4,613 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 3.9% of the area of London (62 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. San Javier 7,913 inhabitants where it started
    4,926 ha
    0.6 %
  2. Huacaraje 4,630 inhabitants
    1,295 ha
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
29 Aug 36.0 °C 30 % 22 km/h 0.0 mm High 26
30 Aug 34.4 °C 39 % 21 km/h 0.0 mm High 22
31 Aug 33.9 °C 40 % 23 km/h 0.0 mm High 27
1 Sept 30.7 °C 36 % 38 km/h 0.0 mm High 34
2 Sept 33.4 °C 32 % 24 km/h 0.0 mm High 22
3 Sept 35.4 °C 34 % 34 km/h 0.0 mm High 30
4 Sept 34.7 °C 42 % 30 km/h 0.0 mm High 30
5 Sept 29.5 °C 38 % 43 km/h 0.0 mm High 38
6 Sept 31.4 °C 34 % 19 km/h 0.0 mm High 22
7 Sept 34.2 °C 33 % 25 km/h 0.0 mm High 28
8 Sept 35.5 °C 36 % 23 km/h 0.0 mm High 26
9 Sept 36.5 °C 35 % 21 km/h 0.0 mm High 25
10 Sept 36.7 °C 34 % 26 km/h 0.0 mm High 27
11 Sept after 36.4 °C 38 % 38 km/h 0.0 mm Very high 38
12 Sept after 34.3 °C 50 % 34 km/h 1.5 mm High 24

Its twins: fires that started in the same weather

It started with an FWI of 26.0, a minimum humidity of 30% and 19 days without rain. Fires in the area that started in weather like this since 2016: 37.

FWI at the start 26.0
Minimum humidity 30 %
Days without rain 19
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Trinidad fire, August 2022
8,736 ha 14 days FWI 26.1 Min. humidity 28 % 70 km away, in 2022

First rain (1 mm or more) after it ended: 2.5 mm on 14 Sept.

What happened to them

12 days
median duration
6,671 ha
median area
27 %
went past 10,000 ha
5.8 mm
rain at the end (median; 36 of 37 had it)

It burned an area similar to its twins (6,186 ha against a median of 6,671 ha) and lasted 13 days, against 12 days.

In 1 of 37, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 5.8 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.5 mmfirst rain
12 Sept2 days after it ended
43km/h · max. gust

It was considered over on 10 Sept, and on 12 Sept 1.5 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 36 of 37, with a median of 5.8 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 22 Aug 2024
After · 17 Sept 2024

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 31 August 2024 the air beside the fire reached 496 µg/m³ of PM2.5. That day averaged 305: 20 times the WHO daily guideline (15).

PM2.5 peak496 µg/m³
Days over the guideline14 days
PM10708 µg/m³
Optical depth7.31
27 Aug30 Aug2 Sept5 Sept8 Sept
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 273Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Bolivia

Frequently asked questions

How long did the San Javier fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 29 August 2024 to 10 September 2024 (13 days). The perimeter dates it from 29 August 2024 to 6 September 2024.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 6,186 hectares (61.9 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: San Javier (4,926 ha, 0.6 %); Huacaraje (1,295 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 36.7 °C, humidity dropped to 30 % and gusts hit 43 km/h. The fire danger index (FWI) reached 38, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Bolivia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 37. Their median duration was 12 days and their median area 6,671 ha; 27 % went past 10,000 ha. In 1 of 37, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 5.8 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 119 · 110 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 119 · 110.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 29 August 2024 to 6 September 2024. 273 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.