Skip to content
worldfires
PY · Paraguay · –

San Carlos fire, 18 August 2024 San Carlos, Sgto. Jose Felix Lopez

Out · last detection 22 Aug 2024, 04:44 UTC

The fire started on 18 August 2024 in San Carlos, Paraguay, and satellites saw it burning for 5 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,508 hectares from heat detections, spread across 2 municipalities.

It is the 52th largest in Concepción since 2016 (of 191 with a page). Number 44 in Paraguay in 2024, of 188.

Burnt area
3,508ha
GWIS perimeter (Copernicus)
Duration
5days
18 Aug 2024 – 22 Aug 2024
Municipalities hit
2
districts
Started on
18 Aug
2024
Heat detections
113
in a single hotspot: 235 MW
Danger at start
40
Very high · FWI index
Average daily power
369MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 18 Aug22 Aug
22 Aug 2024

How it evolved, day by day

18 Aug 2024 · 853 MW · 20 19 Aug 2024 · 23 MW · 5 20 Aug 2024 · 11 MW · 5 21 Aug 2024 · 847 MW · 43 22 Aug 2024 · 108 MW · 40
18 Aug 19 Aug 20 Aug 21 Aug 22 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
60km/h · peak gust
20%lowest humidity

It had gone 9 days without rain (1 mm or more) when it started. Rain came after the fire: 7.7 mm on 23 Aug.

This area had burned before

92% of the perimeter overlaps earlier fires recorded since 2016: 953 ha in 2016, 950 ha in 2017, 1,632 ha in 2019, 2,366 ha in 2020, 1,202 ha in 2021, 1,320 ha in 2023. Part of it burned more than once, so the yearly figures add up to more than the 3,234 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 2.2% of the area of London (35 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. San Carlos where it started
    2,046 ha reached on 18 Aug
    1.1 %
  2. 1,482 ha reached on 21 Aug
    0.6 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
18 Aug 37.7 °C 20 % 41 km/h 0.0 mm Very high 40
19 Aug 37.1 °C 23 % 37 km/h 0.0 mm High 38
20 Aug 32.7 °C 33 % 29 km/h 0.0 mm High 25
21 Aug 37.0 °C 21 % 60 km/h 0.0 mm Very high 48
22 Aug 28.5 °C 32 % 36 km/h 0.0 mm High 30
23 Aug after 15.9 °C 78 % 40 km/h 7.7 mm Very low 0

Its twins: fires that started in the same weather

It started with an FWI of 40.2, a minimum humidity of 20% and 9 days without rain. Fires in the area that started in weather like this since 2016: 34.

FWI at the start 40.2
Minimum humidity 20 %
Days without rain 9
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

San Lazaro fire, July 2021
1,815 ha 4 days FWI 42.0 Min. humidity 20 % 69 km away, in 2021

First rain (1 mm or more) after it ended: 4.0 mm on 15 Jul.

What happened to them

6 days
median duration
2,849 ha
median area
100 %
went past 1,000 ha
4.8 mm
rain at the end (median; 31 of 34 had it)

It burned an area similar to its twins (3,508 ha against a median of 2,849 ha) and lasted 5 days, against 6 days.

In 3 of 34, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.8 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

7.7 mmfirst rain
23 Augthe day after it ended
60km/h · max. gust

It was considered over on 22 Aug, and on 23 Aug 7.7 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 31 of 34, with a median of 4.8 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 11 Aug 2024
After · 29 Aug 2024

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 20 August 2024 the air beside the fire reached 77 µg/m³ of PM2.5. That day averaged 50: 3.3 times the WHO daily guideline (15).

PM2.5 peak77 µg/m³
Days over the guideline6 days
PM10110 µg/m³
Optical depth3.55
16 Aug18 Aug20 Aug22 Aug24 Aug
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 113Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Paraguay

Frequently asked questions

How long did the San Carlos fire last?
GWIS (Copernicus) dates it between 18 August 2024 and 22 August 2024: 5 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,508 hectares (35.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: San Carlos (2,046 ha, 1.1 %); Sgto. Jose Felix Lopez (1,482 ha, 0.6 %).
What was the weather like?
During the fire the temperature reached 37.7 °C, humidity dropped to 20 % and gusts hit 60 km/h. The fire danger index (FWI) reached 48, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Paraguay (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 34. Their median duration was 6 days and their median area 2,849 ha; 100 % went past 1,000 ha. In 3 of 34, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.8 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 132 · 911 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 132 · 911.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 113 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.