Skip to content
worldfires
BO · Bolivia · –

San Andrés fire, 16 September 2025 San Andrés

Out · last detection 30 Sept 2025, 17:42 UTC

The fire started on 16 September 2025 in San Andrés, Bolivia, and satellites saw it burning for 15 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 6,468 hectares from heat detections, spread across a single municipality.

It is the 296th largest in Beni since 2016 (of 858 with a page). Number 21 in Bolivia in 2025, of 60.

Burnt area
6,468ha
GWIS perimeter (Copernicus)
Duration
15days
16 Sept 2025 – 30 Sept 2025
Municipalities hit
1
municipalities
Started on
16 Sept
2025
Heat detections
131
in a single hotspot: 53 MW
Danger at start
25
High · FWI index
Average daily power
153MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 16 Sept30 Sept
30 Sept 2025

How it evolved, day by day

18 Sept 2025 · 105 MW · 11 20 Sept 2025 · 166 MW · 26 21 Sept 2025 · 312 MW · 38 22 Sept 2025 · 61 MW · 13 24 Sept 2025 · 71 MW · 8 26 Sept 2025 · 527 MW · 22 28 Sept 2025 · 9 MW · 2 29 Sept 2025 · 72 MW · 5 30 Sept 2025 · 50 MW · 6
18 Sept 21 Sept 26 Sept 30 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
70km/h · peak gust
30%lowest humidity

It had gone 10 days without rain (1 mm or more) when it started. Rain came after the fire: 13.4 mm on 1 Oct.

This area had burned before

77% of the perimeter overlaps earlier fires recorded since 2016: 2,628 ha in 2016, 400 ha in 2020, 1,273 ha in 2022, 1,794 ha in 2023, 1,480 ha in 2024. Part of it burned more than once, so the yearly figures add up to more than the 4,995 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 4.1% of the area of London (65 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. San Andrés 15,570 inhabitants where it started
    6,504 ha
    0.6 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area0.20 ha
Residents< 20

Inside the perimeter there were about 0.20 hectares of built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
16 Sept 37.5 °C 40 % 28 km/h 0.3 mm High 25
17 Sept 29.9 °C 68 % 27 km/h 4.5 mm Very low 4
18 Sept 36.9 °C 38 % 26 km/h 0.0 mm Moderate 14
19 Sept 36.0 °C 44 % 43 km/h 0.1 mm High 22
20 Sept 36.4 °C 41 % 49 km/h 0.0 mm High 29
21 Sept 35.5 °C 46 % 70 km/h 0.1 mm Very high 40
22 Sept 34.6 °C 47 % 52 km/h 8.2 mm High 24
23 Sept 26.8 °C 40 % 32 km/h 0.3 mm Very low 4
24 Sept 33.1 °C 43 % 31 km/h 0.0 mm Moderate 15
25 Sept 33.4 °C 32 % 36 km/h 0.2 mm High 24
26 Sept 37.9 °C 30 % 20 km/h 0.0 mm Moderate 21
27 Sept 36.7 °C 36 % 40 km/h 0.0 mm High 32
28 Sept 32.7 °C 48 % 30 km/h 0.0 mm High 24
29 Sept 34.3 °C 52 % 41 km/h 5.4 mm Very low 5
30 Sept 36.0 °C 46 % 47 km/h 0.2 mm Moderate 17
1 Oct after 27.6 °C 63 % 40 km/h 13.4 mm Very low 0

Its twins: fires that started in the same weather

It started with an FWI of 24.6, a minimum humidity of 40% and 10 days without rain. Fires in the area that started in weather like this since 2016: 36.

FWI at the start 24.6
Minimum humidity 40 %
Days without rain 10
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

San Javier fire, September 2017
5,708 ha 8 days FWI 24.4 Min. humidity 40 % 120 km away, in 2017

First rain (1 mm or more) after it ended: 11.5 mm on 11 Sept.

What happened to them

14 days
median duration
5,803 ha
median area
33 %
went past 10,000 ha
7.1 mm
rain at the end (median; 35 of 36 had it)

It burned an area similar to its twins (6,468 ha against a median of 5,803 ha) and lasted 15 days, against 14 days.

In 1 of 36, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 7.1 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

13.4 mmfirst rain
1 Octthe day after it ended
70km/h · max. gust

It was considered over on 30 Sept, and on 1 Oct 13.4 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 35 of 36, with a median of 7.1 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 9 Sept 2025
After · 7 Oct 2025

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 23 September 2025 the air beside the fire reached 91 µg/m³ of PM2.5. That day averaged 58: 3.9 times the WHO daily guideline (15).

PM2.5 peak91 µg/m³
Days over the guideline12 days
PM1093 µg/m³
Optical depth0.96
14 Sept18 Sept22 Sept26 Sept30 Sept
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 131Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Bolivia

Frequently asked questions

How long did the San Andrés fire last?
GWIS (Copernicus) dates it between 16 September 2025 and 30 September 2025: 15 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 6,468 hectares (64.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered San Andrés (6,504 ha, 0.6 %).
What was the weather like?
During the fire the temperature reached 37.9 °C, humidity dropped to 30 % and gusts hit 70 km/h. The fire danger index (FWI) reached 40, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Bolivia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 36. Their median duration was 14 days and their median area 5,803 ha; 33 % went past 10,000 ha. In 1 of 36, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 7.1 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 119 · 110 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 119 · 110.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 131 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.