Skip to content
worldfires
GT · Guatemala · –

San Andrés fire, May 2025 San Andrés

Out · last detection 28 May 2025, 18:35 UTC

The fire started on 19 May 2025 in San Andrés, Guatemala, and satellites saw it burning for 10 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 2,196 hectares from heat detections, spread across a single municipality.

It is the 28th largest in Petén since 2016 (of 149 with a page). Number 2 in Guatemala in 2025, of 9.

Burnt area
2,196ha
GWIS perimeter (Copernicus)
Duration
10days
19 May 2025 – 28 May 2025
Municipalities hit
1
municipalities
Started on
19 May
2025
Heat detections
81
in a single hotspot: 45 MW
Danger at start
34
High · FWI index
Average daily power
195MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 19 May28 May
28 May 2025

How it evolved, day by day

19 May 2025 · 12 MW · 1 20 May 2025 · 540 MW · 42 21 May 2025 · 350 MW · 22 22 May 2025 · 27 MW · 5 25 May 2025 · 230 MW · 10 28 May 2025 · 12 MW · 1
20 May 25 May

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

43°high
45km/h · peak gust
27%lowest humidity

It had gone 7 days without rain (1 mm or more) when it started. Rain came after the fire: 1.0 mm on 2 Jun.

This area had burned before

93% of the perimeter overlaps earlier fires recorded since 2016: 1,368 ha in 2019, 1,419 ha in 2020, 1,307 ha in 2023. Part of it burned more than once, so the yearly figures add up to more than the 2,033 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 1.4% of the area of London (22 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. San Andrés 20,295 inhabitants where it started
    2,206 ha reached on 19 May
    0.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area1.4 ha
Residents≈ 350

Inside the perimeter there were about 1.4 hectares of built-up land and about 350 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
19 May 41.5 °C 30 % 45 km/h 0.0 mm High 34
20 May 42.9 °C 27 % 45 km/h 0.0 mm High 33
21 May 41.4 °C 29 % 42 km/h 0.0 mm High 31
22 May 39.5 °C 33 % 39 km/h 0.2 mm High 34
23 May 39.5 °C 38 % 45 km/h 3.2 mm Very high 38
24 May 38.7 °C 36 % 42 km/h 1.0 mm High 25
25 May 39.8 °C 30 % 45 km/h 0.2 mm High 34
26 May 40.7 °C 30 % 45 km/h 0.1 mm High 30
27 May 39.9 °C 32 % 43 km/h 0.2 mm High 33
28 May 39.7 °C 34 % 40 km/h 0.7 mm High 31
29 May after 38.4 °C 39 % 38 km/h 0.8 mm High 28
30 May after 39.6 °C 33 % 34 km/h 0.1 mm High 30
31 May after 41.0 °C 29 % 46 km/h 0.0 mm High 28
1 Jun after 41.5 °C 25 % 41 km/h 0.0 mm High 29
2 Jun after 41.7 °C 26 % 34 km/h 1.0 mm High 32

Its twins: fires that started in the same weather

It started with an FWI of 33.5, a minimum humidity of 30% and 7 days without rain. Fires in the area that started in weather like this since 2016: 29.

FWI at the start 33.5
Minimum humidity 30 %
Days without rain 7
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

La Libertad fire, March 2024
2,235 ha 8 days FWI 33.7 Min. humidity 30 % 99 km away, in 2024

First rain (1 mm or more) after it ended: 1.3 mm on 4 Apr.

What happened to them

10 days
median duration
1,591 ha
median area
97 %
went past 1,000 ha
3.0 mm
rain at the end (median; 21 of 29 had it)

It burned an area similar to its twins (2,196 ha against a median of 1,591 ha) and lasted 10 days, against 10 days.

In 8 of 29, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.0 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.0 mmfirst rain
2 Jun5 days after it ended
45km/h · max. gust

It was considered over on 28 May, and on 2 Jun 1.0 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 21 of 29, with a median of 3.0 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 12 May 2025
After · 4 Jun 2025

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 30 May 2025 the air beside the fire reached 28 µg/m³ of PM2.5. That day averaged 25: 1.6 times the WHO daily guideline (15).

PM2.5 peak28 µg/m³
Days over the guideline2 days
PM1065 µg/m³
Optical depth0.37
17 May20 May23 May26 May29 May
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 81Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Guatemala

Frequently asked questions

How long did the San Andrés fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 19 May 2025 to 28 May 2025 (10 days). The perimeter dates it from 20 May 2025 to 22 May 2025.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 2,196 hectares (22.0 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered San Andrés (2,206 ha, 0.3 %).
What was the weather like?
During the fire the temperature reached 42.9 °C, humidity dropped to 27 % and gusts hit 45 km/h. The fire danger index (FWI) reached 38, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Guatemala (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 29. Their median duration was 10 days and their median area 1,591 ha; 97 % went past 1,000 ha. In 8 of 29, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.0 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 122 · 123 · 1566 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 22 May 2025 → 28 May 2025.
  2. Start date: 20 May 2025 → 19 May 2025.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 122 · 123 · 1566.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 20 May 2025 to 22 May 2025. 81 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.