Skip to content
worldfires
BO · Bolivia · –

San Andrés fire, 17 September 2024 San Andrés

Out · last detection 18 Oct 2024, 05:12 UTC

The fire started on 17 September 2024 in San Andrés, Bolivia, and satellites saw it burning for 31 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 5,050 hectares from heat detections, spread across a single municipality.

It is the 410th largest in Beni since 2016 (of 858 with a page). Number 161 in Bolivia in 2024, of 295.

Burnt area
5,050ha
GWIS perimeter (Copernicus)
Duration
31days
17 Sept 2024 – 17 Oct 2024
Municipalities hit
1
municipalities
Started on
17 Sept
2024
Heat detections
459
in a single hotspot: 130 MW
Danger at start
11
Low · FWI index
Average daily power
109MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 17 Sept17 Oct
18 Oct 2024

How it evolved, day by day

17 Sept 2024 · 128 MW · 3 18 Sept 2024 · 19 MW · 4 19 Sept 2024 · 3 MW · 1 20 Sept 2024 · 26 MW · 13 21 Sept 2024 · 7 MW · 3 22 Sept 2024 · 3 MW · 1 24 Sept 2024 · 46 MW · 3 25 Sept 2024 · 47 MW · 5 26 Sept 2024 · 39 MW · 5 27 Sept 2024 · 0 MW · 0 28 Sept 2024 · 48 MW · 3 29 Sept 2024 · 96 MW · 12 30 Sept 2024 · 273 MW · 27 1 Oct 2024 · 271 MW · 16 2 Oct 2024 · 433 MW · 46 3 Oct 2024 · 40 MW · 8 4 Oct 2024 · 253 MW · 47 5 Oct 2024 · 60 MW · 26 6 Oct 2024 · 175 MW · 31 7 Oct 2024 · 126 MW · 30 8 Oct 2024 · 79 MW · 16 9 Oct 2024 · 81 MW · 4 10 Oct 2024 · 13 MW · 1 11 Oct 2024 · 241 MW · 40 12 Oct 2024 · 335 MW · 57 13 Oct 2024 · 145 MW · 45 15 Oct 2024 · 12 MW · 4 16 Oct 2024 · 41 MW · 7 18 Oct 2024 · 2 MW · 1
17 Sept 24 Sept 2 Oct 12 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
49km/h · peak gust
32%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 5.7 mm on 18 Oct.

This area had burned before

46% of the perimeter overlaps earlier fires recorded since 2016: 966 ha in 2019, 229 ha in 2021, 2,539 ha in 2022, 969 ha in 2023. Part of it burned more than once, so the yearly figures add up to more than the 2,325 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 3.2% of the area of London (50 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. San Andrés 15,570 inhabitants where it started
    5,071 ha
    0.5 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
17 Sept 32.6 °C 45 % 19 km/h 0.0 mm Low 11
18 Sept 35.0 °C 44 % 38 km/h 0.1 mm Moderate 19
19 Sept 36.5 °C 40 % 42 km/h 0.1 mm High 27
20 Sept 37.0 °C 42 % 41 km/h 0.0 mm High 26
21 Sept 36.5 °C 41 % 31 km/h 0.0 mm High 24
22 Sept 37.8 °C 36 % 38 km/h 0.0 mm High 30
23 Sept 37.2 °C 40 % 40 km/h 0.0 mm High 32
24 Sept 37.1 °C 43 % 38 km/h 0.1 mm High 30
25 Sept 38.1 °C 38 % 41 km/h 0.5 mm High 32
26 Sept 35.8 °C 46 % 38 km/h 3.0 mm High 27
27 Sept 29.4 °C 46 % 40 km/h 0.8 mm Low 8
28 Sept 34.2 °C 40 % 18 km/h 0.1 mm Moderate 12
29 Sept 36.8 °C 36 % 21 km/h 0.2 mm Moderate 20
30 Sept 36.3 °C 46 % 39 km/h 1.6 mm High 30
1 Oct 37.2 °C 37 % 45 km/h 0.0 mm High 30
2 Oct 37.3 °C 41 % 39 km/h 0.1 mm High 29
3 Oct 30.9 °C 40 % 43 km/h 0.6 mm High 28
4 Oct 33.2 °C 38 % 31 km/h 0.0 mm High 27
5 Oct 37.6 °C 32 % 22 km/h 0.0 mm High 27
6 Oct 38.5 °C 35 % 26 km/h 0.0 mm High 30
7 Oct 35.8 °C 44 % 41 km/h 0.3 mm High 33
8 Oct 37.2 °C 42 % 46 km/h 0.8 mm High 35
9 Oct 35.7 °C 43 % 37 km/h 1.9 mm High 24
10 Oct 35.2 °C 47 % 49 km/h 2.4 mm Moderate 12
11 Oct 36.5 °C 40 % 42 km/h 4.8 mm High 23
12 Oct 37.0 °C 40 % 42 km/h 0.4 mm Moderate 13
13 Oct 38.3 °C 36 % 26 km/h 0.1 mm High 24
14 Oct 33.2 °C 52 % 24 km/h 0.3 mm Moderate 20
15 Oct 36.6 °C 42 % 34 km/h 0.7 mm High 25
16 Oct 33.7 °C 50 % 33 km/h 0.9 mm Moderate 19
17 Oct 31.0 °C 71 % 35 km/h 21.5 mm Very low 0
18 Oct after 33.8 °C 62 % 27 km/h 5.7 mm Very low 2

Its twins: fires that started in the same weather

It started with an FWI of 11.1, a minimum humidity of 45% and rain the day before. Fires in the area that started in weather like this since 2016: 51.

FWI at the start 11.1
Minimum humidity 45 %
Days without rain 0
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Huacaraje fire, October 2016
3,888 ha 5 days FWI 11.4 Min. humidity 45 % 151 km away, in 2016

First rain (1 mm or more) after it ended: 24.2 mm on 21 Oct.

What happened to them

11 days
median duration
4,744 ha
median area
18 %
went past 10,000 ha
8.4 mm
rain at the end (median; 49 of 51 had it)

It burned an area similar to its twins (5,050 ha against a median of 4,744 ha) and lasted 31 days, against 11 days.

In 2 of 51, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 8.4 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

5.7 mmfirst rain
18 Octthe day after it ended
49km/h · max. gust

It was considered over on 17 Oct, and on 18 Oct 5.7 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 49 of 51, with a median of 8.4 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 10 Sept 2024
After · 24 Oct 2024

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 5 October 2024 the air beside the fire reached 827 µg/m³ of PM2.5. That day averaged 476: 32 times the WHO daily guideline (15).

PM2.5 peak827 µg/m³
Days over the guideline44 days
PM101,181 µg/m³
Optical depth8.94
6 Sept15 Sept24 Sept3 Oct12 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 459Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Bolivia

Frequently asked questions

How long did the San Andrés fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 17 September 2024 to 17 October 2024 (31 days). The perimeter dates it from 24 September 2024 to 16 October 2024.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 5,050 hectares (50.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered San Andrés (5,071 ha, 0.5 %).
What was the weather like?
During the fire the temperature reached 38.5 °C, humidity dropped to 32 % and gusts hit 49 km/h. The fire danger index (FWI) reached 35, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Bolivia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 51. Their median duration was 11 days and their median area 4,744 ha; 18 % went past 10,000 ha. In 2 of 51, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 8.4 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 119 · 110 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 16 October 2024 → 17 October 2024.
  2. Start date: 24 September 2024 → 17 September 2024.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 119 · 110.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 24 September 2024 to 16 October 2024. 459 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.