Skip to content
worldfires
GT · Guatemala · –

San Andrés fire, 30 March 2024 San Andrés

Out · last detection 2 Apr 2024, 20:08 UTC

The fire started on 30 March 2024 in San Andrés, Guatemala, and satellites saw it burning for 4 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,406 hectares from heat detections, spread across a single municipality.

It is the 68th largest in Petén since 2016 (of 149 with a page). Number 39 in Guatemala in 2024, of 70.

Burnt area
1,406ha
GWIS perimeter (Copernicus)
Duration
4days
30 Mar 2024 – 2 Apr 2024
Municipalities hit
1
municipalities
Started on
30 Mar
2024
Heat detections
72
in a single hotspot: 32 MW
Danger at start
34
High · FWI index
Average daily power
164MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 30 Mar2 Apr
2 Apr 2024

How it evolved, day by day

30 Mar 2024 · 107 MW · 14 31 Mar 2024 · 117 MW · 14 1 Apr 2024 · 309 MW · 27 2 Apr 2024 · 125 MW · 17
30 Mar 31 Mar 1 Apr 2 Apr

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

41°high
42km/h · peak gust
28%lowest humidity

It had gone 18 days without rain (1 mm or more) when it started.

This area had burned before

97% of the perimeter overlaps earlier fires recorded since 2016: 1,403 ha in 2020.

How big is it?

10 km
It burned the equivalent of 0.9% of the area of London (14 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. San Andrés 20,295 inhabitants where it started
    1,416 ha reached on 30 Mar
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
30 Mar 38.6 °C 28 % 37 km/h 0.0 mm High 34
31 Mar 38.5 °C 29 % 40 km/h 0.0 mm Very high 39
1 Apr 39.1 °C 32 % 42 km/h 0.0 mm Very high 42
2 Apr 41.0 °C 28 % 36 km/h 0.0 mm High 36
3 Apr after 34.3 °C 48 % 51 km/h 0.7 mm High 36
4 Apr after 32.0 °C 47 % 32 km/h 0.0 mm High 28
5 Apr after 34.6 °C 45 % 27 km/h 0.0 mm High 26
6 Apr after 36.6 °C 41 % 38 km/h 0.1 mm Very high 40
7 Apr after 40.6 °C 29 % 40 km/h 0.0 mm Very high 42
8 Apr after 36.9 °C 43 % 41 km/h 0.4 mm High 37
9 Apr after 41.4 °C 32 % 49 km/h 0.0 mm Very high 38
10 Apr after 42.7 °C 22 % 36 km/h 0.0 mm Very high 45
11 Apr after 33.7 °C 27 % 48 km/h 0.9 mm High 31
12 Apr after 33.4 °C 34 % 27 km/h 0.0 mm High 24

Its twins: fires that started in the same weather

It started with an FWI of 33.9, a minimum humidity of 28% and 18 days without rain. Fires in the area that started in weather like this since 2016: 25.

FWI at the start 33.9
Minimum humidity 28 %
Days without rain 18
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

San Andrés fire, April 2016
1,379 ha 2 days FWI 33.0 Min. humidity 28 % 15 km away, in 2016

First rain (1 mm or more) after it ended: 1.9 mm on 3 Apr.

What happened to them

10 days
median duration
1,593 ha
median area
100 %
went past 1,000 ha
5.6 mm
rain at the end (median; 19 of 25 had it)

It burned an area similar to its twins (1,406 ha against a median of 1,593 ha) and lasted 4 days, against 10 days.

In 6 of 25, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 5.6 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
42km/h · max. gust

It was considered over on 2 Apr, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 19 of 25, with a median of 5.6 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 23 Mar 2024
After · 9 Apr 2024

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 30 March 2024 the air beside the fire reached 59 µg/m³ of PM2.5. That day averaged 28: 1.8 times the WHO daily guideline (15).

PM2.5 peak59 µg/m³
Days over the guideline4 days
PM1084 µg/m³
Optical depth0.97
28 Mar30 Mar1 Apr3 Apr5 Apr
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 72Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Guatemala

Frequently asked questions

How long did the San Andrés fire last?
GWIS (Copernicus) dates it between 30 March 2024 and 2 April 2024: 4 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,406 hectares (14.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered San Andrés (1,416 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 41.0 °C, humidity dropped to 28 % and gusts hit 42 km/h. The fire danger index (FWI) reached 42, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Guatemala (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 25. Their median duration was 10 days and their median area 1,593 ha; 100 % went past 1,000 ha. In 6 of 25, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 5.6 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 122 · 123 · 1566 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 122 · 123 · 1566.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 72 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.