Skip to content
worldfires
BO · Bolivia · –

San Andrés fire, 31 October 2020 San Andrés, Loreto

Out · last detection 7 Nov 2020, 18:04 UTC

The fire started on 31 October 2020 in San Andrés, Bolivia, and satellites saw it burning for 8 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 9,949 hectares from heat detections, spread across 2 municipalities.

It is the 152th largest in Beni since 2016 (of 858 with a page). Number 52 in Bolivia in 2020, of 210.

Compare with…
Burnt area
9,949ha
GWIS perimeter (Copernicus)
Duration
8days
31 Oct 2020 – 7 Nov 2020
Municipalities hit
2
municipalities
Started on
31 Oct
2020
Heat detections
342
in a single hotspot: 99 MW
Danger at start
16
Moderate · FWI index
Average daily power
703MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 31 Oct7 Nov
7 Nov 2020

How it evolved, day by day

31 Oct 2020 · 21 MW · 3 1 Nov 2020 · 571 MW · 24 2 Nov 2020 · 962 MW · 42 3 Nov 2020 · 634 MW · 24 4 Nov 2020 · 510 MW · 39 5 Nov 2020 · 1,975 MW · 96 6 Nov 2020 · 245 MW · 29 7 Nov 2020 · 704 MW · 85
31 Oct 2 Nov 5 Nov

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
52km/h · peak gust
28%lowest humidity

It had gone one day without rain (1 mm or more) when it started. Rain came after the fire: 11.0 mm on 9 Nov.

This area had burned before

73% of the perimeter overlaps earlier fires recorded since 2016: 4,854 ha in 2016, 1,583 ha in 2017, 2,445 ha in 2018, 7,992 ha in 2019. Part of it burned more than once, so the yearly figures add up to more than the 7,280 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 6.3% of the area of London (99 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. San Andrés 15,570 inhabitants where it started
    8,417 ha
    0.8 %
  2. Loreto 4,269 inhabitants
    1,625 ha
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Strong wind: 9.5 % of the area in Bolivia

Day High Min. humidity Peak gust Rain Danger (FWI)
31 Oct 32.0 °C 32 % 52 km/h 0.0 mm Moderate 16
1 Nov 33.4 °C 28 % 45 km/h 0.0 mm High 22
2 Nov 36.7 °C 28 % 28 km/h 0.0 mm Moderate 16
3 Nov 36.2 °C 34 % 23 km/h 0.0 mm Moderate 18
4 Nov 37.2 °C 32 % 24 km/h 0.0 mm Moderate 18
5 Nov 38.3 °C 28 % 20 km/h 0.0 mm Moderate 18
6 Nov 37.2 °C 41 % 20 km/h 0.0 mm Moderate 18
7 Nov 37.1 °C 43 % 17 km/h 0.0 mm Moderate 16
8 Nov after 35.9 °C 46 % 24 km/h 0.0 mm Moderate 16
9 Nov after 29.7 °C 71 % 29 km/h 11.0 mm Very low 0

Its twins: fires that started in the same weather

It started with an FWI of 16.2, a minimum humidity of 32% and 1 day without rain. Fires in the area that started in weather like this since 2016: 24.

FWI at the start 16.2
Minimum humidity 32 %
Days without rain 1
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Loreto fire, August 2024
4,537 ha 16 days FWI 16.5 Min. humidity 32 % 39 km away, in 2024

First rain (1 mm or more) after it ended: 6.3 mm on 12 Sept.

What happened to them

11 days
median duration
5,014 ha
median area
25 %
went past 10,000 ha
6.3 mm
rain at the end (median; 23 of 24 had it)

It was 2.0 times larger than the median of its twins and lasted 8 days, against 11 days.

Only 6 of its 24 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 1 of 24, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 6.3 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

11.0 mmfirst rain
9 Nov2 days after it ended
52km/h · max. gust

It was considered over on 7 Nov, and on 9 Nov 11.0 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 23 of 24, with a median of 6.3 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 24 Oct 2020
After · 14 Nov 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 342Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Bolivia

Frequently asked questions

How long did the San Andrés fire last?
GWIS (Copernicus) dates it between 31 October 2020 and 7 November 2020: 8 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 9,949 hectares (99.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: San Andrés (8,417 ha, 0.8 %); Loreto (1,625 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 38.3 °C, humidity dropped to 28 % and gusts hit 52 km/h. The fire danger index (FWI) reached 22, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Bolivia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 24. Their median duration was 11 days and their median area 5,014 ha; 25 % went past 10,000 ha. Only 6 of its 24 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 1 of 24, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 6.3 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 119 · 110 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 119 · 110.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 342 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.