Skip to content
worldfires
KH · Cambodia · –

Sambour fire, 11 February 2021 Sambour, Sandan

Out · last detection 21 Feb 2021, 06:34 UTC

The fire started on 11 February 2021 in Sambour, Cambodia, and satellites saw it burning for 11 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 2,479 hectares from heat detections, spread across 2 municipalities.

It is the 40th largest in Kratie since 2016 (of 63 with a page). Number 32 in Cambodia in 2021, of 69.

Burnt area
2,479ha
GWIS perimeter (Copernicus)
Duration
11days
11 Feb 2021 – 21 Feb 2021
Municipalities hit
2
districts
Started on
11 Feb
2021
Heat detections
78
in a single hotspot: 89 MW
Danger at start
20
Moderate · FWI index
Average daily power
103MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 11 Feb21 Feb
21 Feb 2021

How it evolved, day by day

11 Feb 2021 · 16 MW · 2 16 Feb 2021 · 6 MW · 2 17 Feb 2021 · 533 MW · 32 18 Feb 2021 · 80 MW · 23 19 Feb 2021 · 54 MW · 14 20 Feb 2021 · 26 MW · 4 21 Feb 2021 · 4 MW · 1
11 Feb 17 Feb 19 Feb 21 Feb

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

34°high
50km/h · peak gust
31%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 1.5 mm on 2 Mar.

This area had burned before

58% of the perimeter overlaps earlier fires recorded since 2016: 1,154 ha in 2016, 441 ha in 2017. Part of it burned more than once, so the yearly figures add up to more than the 1,431 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 1.6% of the area of London (25 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Sambour where it started
    2,362 ha reached on 11 Feb
    0.4 %
  2. 131 ha reached on 18 Feb
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents≈ 20

Inside the perimeter there were about 0.04 hectares of built-up land and about 20 residents (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
11 Feb 33.6 °C 36 % 24 km/h 0.0 mm Moderate 20
12 Feb 33.6 °C 32 % 22 km/h 0.0 mm High 26
13 Feb 33.3 °C 31 % 21 km/h 0.0 mm High 28
14 Feb 32.9 °C 36 % 23 km/h 0.0 mm High 28
15 Feb 32.7 °C 39 % 24 km/h 0.0 mm High 28
16 Feb 32.4 °C 40 % 26 km/h 0.0 mm High 28
17 Feb 32.9 °C 35 % 33 km/h 0.0 mm High 31
18 Feb 32.5 °C 36 % 43 km/h 0.0 mm High 33
19 Feb 33.0 °C 35 % 50 km/h 0.0 mm High 34
20 Feb 32.4 °C 32 % 42 km/h 0.0 mm High 33
21 Feb 33.2 °C 32 % 31 km/h 0.0 mm High 31
22 Feb after 33.7 °C 33 % 24 km/h 0.0 mm High 30
23 Feb after 34.3 °C 38 % 21 km/h 0.0 mm High 30
24 Feb after 33.8 °C 41 % 26 km/h 0.0 mm High 29
25 Feb after 34.8 °C 40 % 22 km/h 0.0 mm High 30
26 Feb after 34.4 °C 45 % 31 km/h 0.0 mm High 29
27 Feb after 34.6 °C 47 % 33 km/h 0.2 mm High 28
28 Feb after 33.9 °C 46 % 27 km/h 0.0 mm High 27
1 Mar after 35.1 °C 47 % 26 km/h 0.0 mm High 28
2 Mar after 36.1 °C 43 % 28 km/h 1.5 mm Moderate 17

Its twins: fires that started in the same weather

It started with an FWI of 20.5, a minimum humidity of 36% and rain the day before. Fires in the area that started in weather like this since 2016: 18.

FWI at the start 20.5
Minimum humidity 36 %
Days without rain 0
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Chhaeb fire, February 2023
5,451 ha 34 days FWI 21.2 Min. humidity 35 % 86 km away, in 2023

First rain (1 mm or more) after it ended: 1.0 mm on 28 Mar.

What happened to them

15 days
median duration
2,380 ha
median area
100 %
went past 1,000 ha
1.8 mm
rain at the end (median; 9 of 18 had it)

It burned an area similar to its twins (2,479 ha against a median of 2,380 ha) and lasted 11 days, against 15 days.

In 9 of 18, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.8 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.5 mmfirst rain
2 Mar9 days after it ended
50km/h · max. gust

It was considered over on 21 Feb, and on 2 Mar 1.5 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 9 of 18, with a median of 1.8 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 4 Feb 2021
After · 28 Feb 2021

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 78Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Cambodia

Frequently asked questions

How long did the Sambour fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 11 February 2021 to 21 February 2021 (11 days). The perimeter dates it from 16 February 2021 to 21 February 2021.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 2,479 hectares (24.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Sambour (2,362 ha, 0.4 %); Sandan (131 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 33.6 °C, humidity dropped to 31 % and gusts hit 50 km/h. The fire danger index (FWI) reached 34, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Cambodia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 18. Their median duration was 15 days and their median area 2,380 ha; 100 % went past 1,000 ha. In 9 of 18, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.8 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 16 February 2021 → 11 February 2021.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 16 February 2021 to 21 February 2021. 78 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.