Skip to content
worldfires
CD · Democratic Republic of the Congo · –

Sakania fire, 16 September 2025 Sakania

Out · last detection 27 Sept 2025, 23:01 UTC

The fire started on 16 September 2025 in Sakania, Democratic Republic of the Congo, and satellites saw it burning for 12 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 12,578 hectares from heat detections, spread across a single municipality.

Number 7 in Democratic Republic of the Congo in 2025, of 61.

GWIS near-real-time perimeter, from the layer that changed in August 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
12,578ha
GWIS perimeter (Copernicus)
Duration
12days
16 Sept 2025 – 27 Sept 2025
Municipalities hit
1
territories
Started on
16 Sept
2025
Heat detections
263
in a single hotspot: 60 MW
Danger at start
43
Very high · FWI index
Average daily power
271MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 16 Sept27 Sept
27 Sept 2025

How it evolved, day by day

16 Sept 2025 · 810 MW · 51 17 Sept 2025 · 860 MW · 85 18 Sept 2025 · 846 MW · 63 19 Sept 2025 · 130 MW · 22 20 Sept 2025 · 1 MW · 1 21 Sept 2025 · 49 MW · 5 22 Sept 2025 · 5 MW · 2 23 Sept 2025 · 30 MW · 1 24 Sept 2025 · 7 MW · 2 26 Sept 2025 · 53 MW · 13 27 Sept 2025 · 184 MW · 18
17 Sept 22 Sept 26 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

33°high
50km/h · peak gust
12%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

10% of the perimeter overlaps earlier fires recorded since 2016: 1,259 ha in 2020, 12 ha in 2022.

How big is it?

10 km
It burned the equivalent of 7.9% of the area of London (126 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Sakania where it started
    12,651 ha reached on 16 Sept
    0.6 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with 60 days without rain: 26 % of the area in Democratic Republic of the Congo

Day High Min. humidity Peak gust Rain Danger (FWI)
16 Sept 33.0 °C 15 % 28 km/h 0.0 mm Very high 43
17 Sept 33.4 °C 15 % 30 km/h 0.0 mm Very high 48
18 Sept 33.3 °C 12 % 46 km/h 0.0 mm Extreme 55
19 Sept 32.1 °C 26 % 41 km/h 0.0 mm Very high 47
20 Sept 31.0 °C 29 % 50 km/h 0.0 mm Very high 49
21 Sept 30.1 °C 28 % 41 km/h 0.0 mm Very high 43
22 Sept 32.0 °C 23 % 39 km/h 0.0 mm Very high 42
23 Sept 32.7 °C 19 % 36 km/h 0.0 mm Very high 44
24 Sept 32.4 °C 19 % 39 km/h 0.0 mm Very high 45
25 Sept 32.7 °C 18 % 37 km/h 0.0 mm Very high 47
26 Sept 31.7 °C 22 % 43 km/h 0.0 mm Very high 49
27 Sept 32.8 °C 21 % 40 km/h 0.0 mm Very high 48
28 Sept after 33.6 °C 20 % 32 km/h 0.0 mm Very high 43
29 Sept after 34.3 °C 19 % 24 km/h 0.4 mm Very high 41
30 Sept after 32.5 °C 26 % 38 km/h 0.0 mm Very high 47
1 Oct after 27.7 °C 44 % 53 km/h 0.0 mm Very high 39
2 Oct after 30.7 °C 25 % 31 km/h 0.0 mm High 36
3 Oct after 32.2 °C 10 % 35 km/h 0.0 mm Extreme 54
4 Oct after 29.2 °C 16 % 43 km/h 0.0 mm Extreme 55
5 Oct after 30.3 °C 22 % 37 km/h 0.0 mm Very high 48
6 Oct after 31.4 °C 19 % 32 km/h 0.0 mm Very high 44
7 Oct after 32.6 °C 16 % 32 km/h 0.0 mm Very high 48

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 9 Sept 2025
After · 4 Oct 2025

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 29 September 2025 the air beside the fire reached 45 µg/m³ of PM2.5. That day averaged 33: 2.2 times the WHO daily guideline (15).

PM2.5 peak45 µg/m³
Days over the guideline13 days
PM1047 µg/m³
Optical depth1.07
14 Sept18 Sept22 Sept26 Sept30 Sept
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 263Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Democratic Republic of the Congo

Frequently asked questions

How long did the Sakania fire last?
GWIS (Copernicus) dates it between 16 September 2025 and 27 September 2025: 12 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 12,578 hectares (125.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Sakania (12,651 ha, 0.6 %).
What was the weather like?
During the fire the temperature reached 33.4 °C, humidity dropped to 12 % and gusts hit 50 km/h. The fire danger index (FWI) reached 55, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Democratic Republic of the Congo (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 263 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.