Skip to content
worldfires
SL · Sierra Leone · –

Safroko Limba fire, February 2020 Safroko Limba, Biriwa

Out · last detection

The fire started on in Safroko Limba, Sierra Leone, and satellites saw it burning for 9 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,646 hectares from heat detections, spread across 2 municipalities.

It is number 282 by size of the 937 fires with a page that started in Northern since 2016. Number 37 in Sierra Leone in 2020, of 147.

Burnt area
1,646ha
GWIS perimeter (Copernicus)
Duration
9days
4 Feb 2020 – 12 Feb 2020
Municipalities hit
2
chiefdoms
Started on
4 Feb
2020
Heat detections
50
in a single hotspot: 62 MW
Danger at start
40
Very high · FWI index
Average daily power
174MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 4 Feb12 Feb
10 Feb 2020

How it evolved, day by day

5 Feb 2020 · 83 MW · 5 6 Feb 2020 · 16 MW · 2 8 Feb 2020 · 692 MW · 29 9 Feb 2020 · 76 MW · 13 10 Feb 2020 · 3 MW · 1
5 Feb 6 Feb 8 Feb 9 Feb 10 Feb

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

39°high
26km/h · peak gust
11%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

75% of the perimeter overlaps earlier fires recorded since 2016: 928 ha in 2016, 653 ha in 2018. Part of it burned more than once, so the yearly figures add up to more than the 1,231 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 1% of the area of London (16 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Safroko Limba where it started
    877 ha reached on 5 Feb
    2.2 %
  2. 779 ha reached on 6 Feb
    0.9 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area1.0 ha
Residents≈ 500

Inside the perimeter there were about 1.0 hectares of built-up land and about 500 residents (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Very dry air: 13 % of the area in Sierra Leone 60 days without rain: 15 % of the area in Sierra Leone

Day High Min. humidity Peak gust Rain Danger (FWI)
4 Feb 38.5 °C 13 % 23 km/h 0.0 mm Very high 40
5 Feb 37.5 °C 18 % 23 km/h 0.0 mm High 33
6 Feb 38.2 °C 23 % 23 km/h 0.0 mm High 35
7 Feb 39.1 °C 15 % 22 km/h 0.0 mm Very high 38
8 Feb 38.4 °C 11 % 25 km/h 0.0 mm Very high 49
9 Feb 37.5 °C 18 % 26 km/h 0.0 mm High 35
10 Feb 36.9 °C 28 % 26 km/h 0.0 mm High 33
11 Feb 37.4 °C 24 % 22 km/h 0.0 mm High 31
12 Feb 38.3 °C 16 % 24 km/h 0.0 mm Very high 39
13 Feb after 39.2 °C 11 % 29 km/h 0.0 mm Extreme 50
14 Feb after 38.4 °C 17 % 26 km/h 0.0 mm High 37
15 Feb after 37.7 °C 25 % 22 km/h 0.0 mm High 30
16 Feb after 38.8 °C 19 % 26 km/h 0.0 mm High 29
17 Feb after 38.2 °C 26 % 34 km/h 0.0 mm High 31
18 Feb after 36.9 °C 31 % 31 km/h 0.0 mm High 32
19 Feb after 37.5 °C 26 % 37 km/h 0.0 mm High 33
20 Feb after 38.6 °C 28 % 32 km/h 0.0 mm High 36
21 Feb after 38.1 °C 29 % 37 km/h 0.0 mm Very high 38
22 Feb after 35.7 °C 43 % 28 km/h 0.0 mm High 33

Its twins: fires that started in the same weather

It started with an FWI of 40.3, a minimum humidity of 13% and more than two months without rain. Fires in the area that started in weather like this since 2016: 22.

FWI at the start 40.3
Minimum humidity 13 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Nieni fire, March 2019
2,190 ha 11 days FWI 41.9 Min. humidity 13 % 70 km away, in 2019

First rain (1 mm or more) after it ended: 6.8 mm on 21 Mar.

What happened to them

11 days
median duration
1,802 ha
median area
100 %
went past 1,000 ha
5.3 mm
rain at the end (median; 14 of 22 had it)

It burned an area similar to its twins (1,646 ha against a median of 1,802 ha) and lasted 9 days, against 11 days.

In 8 of 22, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 5.3 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
26km/h · max. gust

It was considered over on 12 Feb, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 14 of 22, with a median of 5.3 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 28 Jan 2020
After · 19 Feb 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 50Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Sierra Leone

Frequently asked questions

How long did the Safroko Limba fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 4 February 2020 to 12 February 2020 (9 days). The perimeter dates it from 6 February 2020 to 10 February 2020.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,646 hectares (16.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Safroko Limba (877 ha, 2.2 %); Biriwa (779 ha, 0.9 %).
What was the weather like?
During the fire the temperature reached 39.1 °C, humidity dropped to 11 % and gusts hit 26 km/h. The fire danger index (FWI) reached 49, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Sierra Leone (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 22. Their median duration was 11 days and their median area 1,802 ha; 100 % went past 1,000 ha. In 8 of 22, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 5.3 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 10 February 2020 → 12 February 2020.
  2. Start date: 6 February 2020 → 4 February 2020.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 6 February 2020 to 10 February 2020. 50 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.