How long did the Saber Fire last?

The official perimeter only gives the start date (2 August 2019). The end comes from the heat detections inside the perimeter: it burned until 24 August 2019 (23 days from 2 August 2019), the last day with detections before more than 10 days in a row without any, so it is approximate.

How much area did it burn?

The official perimeter published by United States agencies (MTBS / NIFC) is 1,403 hectares (14.0 km²). Other tallies, such as daily incident reports, may give slightly different figures.

Which counties burned?

The fire only entered Coconino (1,397 ha, 0.0 %).

What was the weather like?

During the fire the temperature reached 32.1 °C, humidity dropped to 6 % and gusts hit 50 km/h. The fire danger index (FWI) reached 58, class Extreme.

Where does this data come from?

From the official burnt perimeter of United States agencies (MTBS / NIFC, public domain), NASA FIRMS VIIRS hotspots and the administrative boundaries of United States. It is not an official report.

US · United States · 2019-08-02 → 2019-08-24

Saber Fire, August 2019 Coconino

Out · last detection 24 Aug 2019, 21:10 UTC

The fire started on 2 August 2019 in Coconino, United States, and satellites saw it burning for 23 days. United States agencies (MTBS / NIFC) mapped an official burnt perimeter of 1,403 hectares, spread across a single county.

It is the 169th largest in Arizona since 2016 (of 380 with a page). Number 165 in United States in 2019, of 367.

Compare with…

Suggestions: Platypus · 2018 Whiskey · 2019 Pocket · 2026 Rafael · 2021

Burnt area: 1,403ha; official perimeter (MTBS / NIFC)
Duration: ≈ 23days; 2 Aug 2019 – 24 Aug 2019
Counties hit: 1; counties
Started on: 2 Aug; 2019
Heat detections: 254; in a single hotspot: 177 MW
Danger at start: 11; Moderate · FWI index
Average daily power: 294MW; detected power per day, on average

HOTSPOTS BY DAY 2 Aug24 Aug

Play back 24 Aug 2019

How it evolved, day by day

11 Aug 13 Aug 15 Aug 17 Aug 19 Aug 21 Aug 23 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

32°high

50km/h · peak gust

6%lowest humidity

It had gone one day without rain (1 mm or more) when it started. Rain came after the fire: 2.3 mm on 28 Aug.

This area had burned before

0% of the perimeter overlaps earlier fires recorded since 2016: 5 ha in 2018.

5 ha Platypus fire, July 2018 2,244 ha in total; the hectares shown are those it shares with this fire

How big is it?

It burned the equivalent of 0.9% of the area of London (14 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each county

Coconino where it started

1,397 ha reached on 11 Aug

0.0 %

Burnt area inside each county, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020

Built-up area< 0.1 ha

Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day	High	Min. humidity	Peak gust	Rain	Danger (FWI)
2 Aug	29.1 °C	27 %	28 km/h	1.9 mm	Moderate 11
3 Aug	29.9 °C	20 %	34 km/h	0.8 mm	High 25
4 Aug	29.5 °C	26 %	32 km/h	0.1 mm	High 28
5 Aug	30.2 °C	19 %	45 km/h	0.2 mm	High 35
6 Aug	24.6 °C	33 %	33 km/h	3.1 mm	Low 7
7 Aug	26.4 °C	30 %	34 km/h	0.3 mm	Moderate 19
8 Aug	27.7 °C	22 %	36 km/h	0.0 mm	High 29
9 Aug	25.0 °C	26 %	34 km/h	0.2 mm	High 29
10 Aug	25.8 °C	30 %	33 km/h	0.0 mm	High 28
11 Aug	26.7 °C	26 %	37 km/h	0.0 mm	High 29
12 Aug	28.2 °C	17 %	33 km/h	0.0 mm	High 33
13 Aug	30.3 °C	7 %	30 km/h	0.0 mm	Very high 41
14 Aug	31.6 °C	7 %	31 km/h	0.0 mm	Very high 44
15 Aug	32.1 °C	6 %	32 km/h	0.0 mm	Very high 46
16 Aug	30.8 °C	9 %	50 km/h	0.0 mm	Extreme 56
17 Aug	29.3 °C	10 %	40 km/h	0.0 mm	Extreme 52
18 Aug	29.0 °C	11 %	38 km/h	0.0 mm	Very high 48
19 Aug	30.0 °C	9 %	36 km/h	0.0 mm	Very high 47
20 Aug	31.8 °C	9 %	36 km/h	0.0 mm	Very high 48
21 Aug	31.9 °C	6 %	36 km/h	0.0 mm	Very high 50
22 Aug	29.8 °C	9 %	50 km/h	0.0 mm	Extreme 58
23 Aug	28.7 °C	13 %	36 km/h	0.0 mm	Very high 49
24 Aug	29.4 °C	16 %	37 km/h	0.0 mm	Very high 46
25 Aug after	30.7 °C	15 %	41 km/h	0.0 mm	Extreme 50
26 Aug after	31.7 °C	12 %	36 km/h	0.0 mm	Very high 46
27 Aug after	32.1 °C	12 %	45 km/h	0.0 mm	Extreme 56
28 Aug after	30.4 °C	15 %	48 km/h	2.3 mm	High 28

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

↔

Before · 26 Jul 2019

After · 31 Aug 2019

Before After

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 254Every satellite heat detection, one by one, with time, satellite, power and coordinates.

⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.

Date and time	Satellite	FRP (MW)	Lat	Lon

Other fires nearby

All fires in United States ›

Frequently asked questions

How long did the Saber Fire last?: The official perimeter only gives the start date (2 August 2019). The end comes from the heat detections inside the perimeter: it burned until 24 August 2019 (23 days from 2 August 2019), the last day with detections before more than 10 days in a row without any, so it is approximate.
How much area did it burn?: The official perimeter published by United States agencies (MTBS / NIFC) is 1,403 hectares (14.0 km²). Other tallies, such as daily incident reports, may give slightly different figures.
Which counties burned?: The fire only entered Coconino (1,397 ha, 0.0 %).
What was the weather like?: During the fire the temperature reached 32.1 °C, humidity dropped to 6 % and gusts hit 50 km/h. The fire danger index (FWI) reached 58, class Extreme.
Where does this data come from?: From the official burnt perimeter of United States agencies (MTBS / NIFC, public domain), NASA FIRMS VIIRS hotspots and the administrative boundaries of United States. It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings ›

Satellite cross-check

NASA FIRMS ↗
NIFC · Fire maps ↗

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

No changes since 24 October 2026.

RSS Changes to this page

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error

What do you think is wrong?

Dates or duration Place or towns Burned area Name It was not a wildfire Same fire as another page Something else

What really happened?

Your connection to the fire (optional) Email (optional)

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this

Perimeter: MTBS (US Geological Survey and US Forest Service), official.
The official perimeter has no end date: the end is the last day with VIIRS detections inside the perimeter before a gap of more than 10 days (150 days at most), so it is approximate. 254 Suomi-NPP VIIRS detections on those dates.
We have not matched this page with any official record.
Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology ›

Where this data comes from

The perimeter is official and in the public domain. For past years it comes from MTBS (Monitoring Trends in Burn Severity), run by the U.S. Geological Survey and the USDA Forest Service, which map it on Landsat and Sentinel-2 imagery. For the current and last year it comes from WFIGS at the National Interagency Fire Center (NIFC): incident perimeters mapped by fire crews, aircraft and imagery. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. County boundaries come from geoBoundaries ADM2 (Public Domain). The area per county is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from official figures.

Where it burned