Skip to content
worldfires
AU · Australia · –

Roper Gulf fire, 16 October 2026 Roper Gulf

Out · last detection 27 Oct 2026, 05:10 UTC

The fire started on 16 October 2026 in Roper Gulf, Australia, and satellites saw it burning for 12 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 25,638 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
25,638ha
GWIS perimeter (Copernicus)
Duration
12days
16 Oct 2026 – 27 Oct 2026
Municipalities hit
1
local government areas
Started on
16 Oct
2026
Heat detections
358
in a single hotspot: 81 MW
Danger at start
36
High · FWI index
Average daily power
323MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 16 Oct27 Oct
27 Oct 2026

How it evolved, day by day

16 Oct 2026 · 3 MW · 1 17 Oct 2026 · 71 MW · 16 18 Oct 2026 · 17 MW · 10 19 Oct 2026 · 42 MW · 18 20 Oct 2026 · 179 MW · 66 21 Oct 2026 · 1,484 MW · 80 22 Oct 2026 · 157 MW · 27 23 Oct 2026 · 0 MW · 0 24 Oct 2026 · 98 MW · 15 25 Oct 2026 · 184 MW · 61 26 Oct 2026 · 1,311 MW · 63 27 Oct 2026 · 7 MW · 1
16 Oct 21 Oct 25 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (63 passes) and with what wind. Watch the film

The weather it burned in

39°high
37km/h · peak gust
21%lowest humidity

It had gone one day without rain (1 mm or more) when it started. Rain came after the fire: 1.9 mm on 29 Oct.

This area had burned before

1% of the perimeter overlaps earlier fires recorded since 2016: 63 ha in 2023, 91 ha in 2024.

How big is it?

10 km
It burned the equivalent of 16% of the area of London (256 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Roper Gulf where it started
    25,922 ha
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
16 Oct 37.8 °C 31 % 32 km/h 0.0 mm High 36
17 Oct 36.3 °C 34 % 33 km/h 0.0 mm Very high 40
18 Oct 37.3 °C 30 % 26 km/h 0.0 mm High 33
19 Oct 39.4 °C 21 % 34 km/h 0.0 mm Very high 49
20 Oct 38.8 °C 22 % 37 km/h 0.0 mm Extreme 56
21 Oct 37.1 °C 27 % 36 km/h 0.0 mm Extreme 51
22 Oct 38.1 °C 27 % 27 km/h 0.1 mm Very high 49
23 Oct 37.0 °C 31 % 26 km/h 0.6 mm High 38
24 Oct 35.4 °C 41 % 36 km/h 1.6 mm Very high 44
25 Oct 37.1 °C 36 % 32 km/h 0.0 mm High 32
26 Oct 37.5 °C 36 % 33 km/h 1.6 mm High 37
27 Oct 33.7 °C 56 % 34 km/h 4.3 mm Low 9
28 Oct after 36.1 °C 37 % 26 km/h 0.2 mm Moderate 20
29 Oct after 34.8 °C 44 % 28 km/h 1.9 mm High 23

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 9 Oct 2026
After · 3 Nov 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 17 October 2026 the air beside the fire reached 27 µg/m³ of PM2.5. That day averaged 17: 1.2 times the WHO daily guideline (15).

PM2.5 peak27 µg/m³
Days over the guideline1 day
PM1031 µg/m³
Optical depth0.53
14 Oct16 Oct18 Oct20 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 358Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Roper Gulf fire last?
GWIS (Copernicus) dates it between 16 October 2026 and 27 October 2026: 12 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 25,638 hectares (256.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Roper Gulf (25,922 ha, 0.1 %).
Is the Roper Gulf fire still active?
No fire detections since 27 Oct 2026, 05:10 UTC. A lack of detections is not an official extinction.
What was the weather like?
During the fire the temperature reached 39.4 °C, humidity dropped to 21 % and gusts hit 37 km/h. The fire danger index (FWI) reached 56, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 4 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 24 October 2026 → 27 October 2026.
  2. Area: 23,642 → 25,620 ha.
  3. Area: 20,228 → 23,642 ha.
  4. Area: 19,507 → 20,228 ha.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 358 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.