Skip to content
worldfires
AU · Australia · –

Roper Gulf fire, 10 October 2026 Roper Gulf, East Arnhem

Out · last detection 9 Nov 2026, 04:46 UTC

The fire started on 10 October 2026 in Roper Gulf, Australia, and satellites saw it burning for 31 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 32,534 hectares from heat detections, spread across 2 municipalities.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
32,534ha
GWIS perimeter (Copernicus)
Duration
31days
10 Oct 2026 – 9 Nov 2026
Municipalities hit
2
local government areas
Started on
10 Oct
2026
Heat detections
982
in a single hotspot: 164 MW
Danger at start
39
Very high · FWI index
Average daily power
372MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 10 Oct9 Nov
9 Nov 2026

How it evolved, day by day

10 Oct 2026 · 10 MW · 1 11 Oct 2026 · 70 MW · 8 12 Oct 2026 · 148 MW · 22 13 Oct 2026 · 16 MW · 5 14 Oct 2026 · 324 MW · 30 15 Oct 2026 · 228 MW · 27 16 Oct 2026 · 668 MW · 25 17 Oct 2026 · 369 MW · 29 18 Oct 2026 · 435 MW · 75 19 Oct 2026 · 448 MW · 51 20 Oct 2026 · 105 MW · 21 21 Oct 2026 · 118 MW · 27 22 Oct 2026 · 357 MW · 46 23 Oct 2026 · 239 MW · 54 24 Oct 2026 · 671 MW · 46 25 Oct 2026 · 1,983 MW · 105 26 Oct 2026 · 2,968 MW · 109 27 Oct 2026 · 623 MW · 72 28 Oct 2026 · 760 MW · 107 29 Oct 2026 · 154 MW · 19 30 Oct 2026 · 2 MW · 4 31 Oct 2026 · 182 MW · 27 1 Nov 2026 · 46 MW · 9 2 Nov 2026 · 73 MW · 11 3 Nov 2026 · 94 MW · 14 4 Nov 2026 · 301 MW · 17 5 Nov 2026 · 82 MW · 8 6 Nov 2026 · 9 MW · 1 7 Nov 2026 · 54 MW · 9 8 Nov 2026 · 2 MW · 2 9 Nov 2026 · 4 MW · 1
10 Oct 17 Oct 26 Oct 31 Oct 7 Nov

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (142 passes) and with what wind. Watch the film

The weather it burned in

40°high
45km/h · peak gust
21%lowest humidity

It had gone 7 days without rain (1 mm or more) when it started. Rain came after the fire: 3.0 mm on 10 Nov.

This area had burned before

16% of the perimeter overlaps earlier fires recorded since 2016: 379 ha in 2016, 383 ha in 2017, 510 ha in 2018, 1,500 ha in 2019, 1,321 ha in 2021, 2,165 ha in 2022, 77 ha in 2023, 266 ha in 2024, 14 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 5,092 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 21% of the area of London (325 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Roper Gulf where it started
    32,095 ha reached on 10 Oct
    0.2 %
  2. 490 ha reached on 18 Oct
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · forecast models, provisional until the ERA5 reanalysis arrives

Day High Min. humidity Peak gust Rain Danger (FWI)
10 Oct 37.5 °C 24 % 41 km/h 0.3 mm Very high 39
11 Oct 36.9 °C 32 % 44 km/h 0.0 mm Very high 45
12 Oct 37.3 °C 33 % 42 km/h 0.0 mm Very high 46
13 Oct 38.0 °C 29 % 40 km/h 0.1 mm Very high 39
14 Oct 36.2 °C 35 % 40 km/h 0.1 mm Very high 48
15 Oct 35.8 °C 35 % 41 km/h 0.1 mm Extreme 51
16 Oct 37.3 °C 31 % 41 km/h 0.4 mm Very high 43
17 Oct 36.9 °C 30 % 37 km/h 0.4 mm Very high 42
18 Oct 36.9 °C 31 % 41 km/h 1.2 mm High 36
19 Oct 36.9 °C 27 % 41 km/h 0.0 mm Very high 49
20 Oct 36.9 °C 29 % 45 km/h 0.0 mm Extreme 57
21 Oct 36.2 °C 35 % 44 km/h 0.4 mm Very high 46
22 Oct 37.0 °C 31 % 35 km/h 0.5 mm Very high 42
23 Oct 36.3 °C 35 % 32 km/h 2.3 mm High 34
24 Oct 38.6 °C 26 % 35 km/h 1.0 mm High 36
25 Oct 39.6 °C 21 % 44 km/h 0.0 mm Very high 45
26 Oct 38.8 °C 30 % 44 km/h 0.9 mm High 38
27 Oct 38.3 °C 30 % 40 km/h 0.2 mm High 38
28 Oct 38.2 °C 35 % 45 km/h 0.5 mm Very high 45
29 Oct 37.2 °C 39 % 37 km/h 3.5 mm High 37
30 Oct 35.5 °C 39 % 39 km/h 0.3 mm High 29
31 Oct 39.1 °C 26 % 37 km/h 0.4 mm Very high 41
1 Nov 38.7 °C 29 % 37 km/h 0.5 mm Very high 45
2 Nov 38.5 °C 31 % 37 km/h 0.9 mm High 36
3 Nov 39.7 °C 24 % 33 km/h 0.0 mm Very high 44
4 Nov 39.7 °C 26 % 34 km/h 0.6 mm Very high 41
5 Nov 40.3 °C 25 % 40 km/h 0.0 mm High 37
6 Nov 39.8 °C 25 % 39 km/h 0.8 mm Very high 44
7 Nov 38.9 °C 30 % 38 km/h 0.9 mm Very high 43
8 Nov 38.3 °C 33 % 31 km/h 1.5 mm High 36
9 Nov 39.1 °C 30 % 32 km/h 0.9 mm High 37
10 Nov after 38.3 °C 35 % 33 km/h 3.0 mm High 35

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 3 Oct 2026
After · 15 Nov 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 8 October 2026 the air beside the fire reached 62 µg/m³ of PM2.5. That day averaged 34: 2.2 times the WHO daily guideline (15).

PM2.5 peak62 µg/m³
Days over the guideline7 days
PM1066 µg/m³
Optical depth0.45
8 Oct10 Oct12 Oct14 Oct16 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 982Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Roper Gulf fire last?
GWIS (Copernicus) dates it between 10 October 2026 and 9 November 2026: 31 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 32,534 hectares (325.3 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Roper Gulf (32,095 ha, 0.2 %); East Arnhem (490 ha, 0.0 %).
Is the Roper Gulf fire still active?
No fire detections since 9 Nov 2026, 04:46 UTC. A lack of detections is not an official extinction.
What was the weather like?
During the fire the temperature reached 40.3 °C, humidity dropped to 21 % and gusts hit 45 km/h. The fire danger index (FWI) reached 57, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 10 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 24 October 2026 → 9 November 2026.
  2. Area: 31,378 → 32,023 ha.
  3. Area: 30,722 → 31,378 ha.
  4. Area: 29,249 → 30,722 ha.
  5. Area: 27,856 → 29,249 ha.
  6. Area: 25,491 → 27,856 ha.
  7. Area: 24,341 → 25,491 ha.
  8. Area: 19,997 → 24,341 ha.
  9. Area: 16,108 → 19,997 ha.
  10. Area: 13,787 → 16,108 ha.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 982 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: ECMWF IFS model, provisional until the ERA5 reanalysis arrives.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.